Archeage
This combination delivers exceptional performance with an average of 122 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 57 | 84 | 95 |
| 1440p QHD | 68 | 100 | 147 | 165 |
| 1080p Full HD | 101 | 149 | 219 | 245 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 7400F + AMD Radeon RX 7900 XTX, In-Depth Analysis
ArcheAge is a 2014 MMORPG that, despite its age, still presents a significant challenge to modern hardware, particularly at higher resolutions and settings. This analysis examines the performance of the AMD Ryzen 5 7400F paired with the AMD Radeon RX 7900 XTX, using measured frame rate data to determine where the bottleneck lies and how to best configure the game for a smooth experience.
Resolution Scaling
The performance scaling from 1080p to 4K reveals a classic transition from a CPU-bound scenario at lower resolutions to a GPU-bound one at higher resolutions. At 1080p with Low settings, the combo delivers 245 FPS. Moving to 1440p Low drops this to 165 FPS, a 33% reduction. At 4K Low, the average falls to 95 FPS, which is a 42% drop from 1440p and a 61% drop from the 1080p figure. This steep decline indicates that the RX 7900 XTX is being pushed harder as the pixel count increases, but the very high frame rates at 1080p suggest the CPU is the limiting factor there, preventing the GPU from reaching even higher numbers.
The trend is similar but with different magnitudes at High settings. At 1080p High, the average is 149 FPS. At 1440p High, it drops to 100 FPS (a 33% decrease), and at 4K High, it plummets to 57 FPS (a 43% decrease from 1440p). The percentage drops are consistent across Low and High settings, which points to a scaling pattern dominated by the resolution's impact on the GPU's fill rate and memory bandwidth. The game engine's overhead seems to scale linearly with resolution, rather than being affected by the complexity of the scene settings. The 4K Ultra setting, which yields just 39 FPS, shows the most extreme pressure on the GPU, indicating that the combination of high pixel count and maximum visual effects is the most demanding scenario tested.
The data strongly suggests that the CPU is the primary bottleneck at 1080p, as the GPU is capable of rendering frames faster than the processor can feed it. The evidence is that the gap between 1080p and 1440p is not as large as the gap between 1440p and 4K, which is the opposite of what you'd expect if the GPU were the sole constraint at all resolutions. Instead, the GPU becomes the limiting factor at 4K, where its performance ceiling is reached, resulting in the more dramatic frame rate drops.
GPU Role
The AMD Radeon RX 7900 XTX is a flagship GPU from the Radeon RX 7000 series, built on the RDNA 3.0 architecture. It features 24 GB of GDDR6 memory on a 384-bit bus, providing a substantial 960.0 GB/s of memory bandwidth. This is a critical specification for a game like ArcheAge, which can have large, open-world environments that require streaming many textures. The high bandwidth ensures that texture data can be loaded quickly, preventing stutters and hitches that can occur with less capable memory subsystems.
The GPU's clock speeds are also a factor. The base clock is 1929 MHz, with a game clock of 2365 MHz and a boost clock of 2498 MHz. The game clock is the typical speed you can expect during sustained gaming workloads, and this high frequency, combined with the 6144 shading units, allows for massive parallel processing power. The measured 4K High average of 57 FPS and 4K Medium average of 84 FPS are direct results of this compute capability. The GPU is undeniably powerful, but the data shows that ArcheAge's engine can still bring it to its knees at 4K Ultra, where the average drops to just 39 FPS.
The GPU's 24 GB of VRAM is more than sufficient for any resolution and settings combination in this test. The fact that the frame rates drop so significantly from Medium to Ultra at 4K (from 84 FPS to 39 FPS) suggests that the Ultra preset is not just using more memory, but is applying effects that heavily tax the GPU's compute units, such as advanced shadows and post-processing. The GPU is not running out of memory; rather, it is running out of raw processing power to handle the increased shader complexity at the Ultra preset. The benchmark results for the GPU show a 64th percentile ranking among all GPUs, and its nearest rivals in average score include the NVIDIA GeForce GTX 1060 3 GB and the NVIDIA TITAN Xp, which highlights the wide variance in synthetic test scores versus real-world gaming performance.
CPU Role
The AMD Ryzen 5 7400F is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture (codenamed Raphael). It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz. For a game released in 2014, the multi-threading capabilities are more than adequate, as most MMORPGs of that era were optimized for fewer cores. The 6 cores and 12 threads are sufficient to handle the game's logic, networking, and audio processing without becoming a bottleneck.
The CPU's single-thread performance is the more critical metric for ArcheAge, as the game's main render thread is often the limiting factor. The Ryzen 5 7400F's boost clock of 4.70 GHz is high, but the benchmark data shows it is not always enough to keep pace with the RX 7900 XTX at lower resolutions. At 1080p Low, the system achieves 245 FPS, which is high, but the GPU is likely capable of more. The fact that the FPS drops by 33% when moving to 1440p Low (to 165 FPS) is a sign that the CPU is no longer the sole bottleneck and the GPU is starting to take over.
The CPU's 32 MB of shared L3 cache is beneficial for gaming, as it helps to reduce memory latency. The processor's performance relative to its rivals is tight; it is 0.1% ahead of the Intel Core i5-14600T and 0.2% ahead of the Intel Core Ultra 7 155H in average benchmark score, but 0.2% behind the AMD Ryzen 7 PRO 6850H. This puts it in a competitive position. However, for this specific game, the data indicates that at 1080p, the CPU is the component that holds back the system's maximum frame rate. The high FPS numbers at 1080p (149 High, 245 Low) are impressive, but the inability to scale up to 4K without a massive drop suggests that the CPU's single-thread performance is a ceiling for the absolute maximum FPS, while the GPU is the ceiling for the maximum quality at high resolutions.
Measured FPS Breakdown
Looking at the exact measured data, the system's performance varies widely based on the selected preset and resolution. The most demanding configuration is 4K Ultra, which averages 39 FPS. This is the only tested configuration that falls below the 60 FPS threshold, and it would be a poor experience for a game requiring quick reactions. The 4K High preset is more playable, with an average of 57 FPS, but it still might have noticeable dips in crowded areas.
At 4K Medium, the average is 84 FPS, with a minimum of 72 FPS and a maximum of 97 FPS. This is a very smooth experience and shows that the RX 7900 XTX has enough headroom to handle 4K if the settings are not maxed out. The 4K Low preset, averaging 95 FPS, is the best 4K option for high refresh rate displays, though it sacrifices visual fidelity.
Dropping to 1440p, the performance is significantly healthier. The High preset averages 100 FPS, which is great for a 144Hz monitor. The Medium preset averages 147 FPS (with min 125, max 169), which is excellent for high-refresh gaming. The Low preset hits 165 FPS, and the Ultra preset averages 68 FPS. The jump from High to Ultra at 1440p is a 32 FPS drop, showing the high cost of the Ultra settings.
At 1080p, the CPU becomes the clear limiter. The Low preset achieves 245 FPS, while High drops to 149 FPS. The Medium preset averages 219 FPS (with min 186, max 251), and Ultra averages 101 FPS. The difference between 1080p and 1440p at the same settings is substantial (e.g., High goes from 149 to 100 FPS), which confirms that the GPU is being utilized more as resolution increases, but the CPU's performance cap is what prevents the 1080p numbers from being even higher.
How This Combo Ranks
In this dataset, the combination of the AMD Ryzen 5 7400F and AMD Radeon RX 7900 XTX ranks 336th out of 2761 tested combos for ArcheAge. This places it in the top 12% of all systems tested, which is a strong showing. The rank is a composite measure that considers performance across all resolutions and settings. While the system is not in the absolute top tier, it is clearly a high-end configuration capable of running the game very well.
The high rank is likely driven by the excellent 1440p performance and the playable 4K performance at Medium and High settings. The system's weakness is at 4K Ultra, where the 39 FPS average drags down its overall score. The CPU's synthetic benchmark percentile is 83rd for all CPUs, and the GPU is in the 64th percentile for all GPUs. This discrepancy suggests that while the CPU is a strong performer, the GPU, while powerful, is not as dominant in this particular title as its raw specs would suggest. The rank of 336 means there are 335 other combinations that perform better, likely including those with even more powerful CPUs or GPUs that can handle 4K Ultra more effectively.
Settings Recommendations
Based on the measured FPS data, the best experience for this hardware will depend on the user's display and preference for frame rate versus visual fidelity. For a 60Hz 4K display, the Medium preset is the clear winner. It provides an average of 84 FPS, which is well above the refresh rate, and the minimum of 72 FPS ensures it stays smooth even in demanding scenes. The High preset at 4K is borderline, with an average of 57 FPS, which could result in occasional frame drops below 60, so Medium is the safer choice.
For a 1440p display with a high refresh rate (144Hz or higher), the Medium preset is the best option, averaging 147 FPS. This provides a very fluid experience that takes advantage of the display's capabilities. The Low preset, at 165 FPS, is even faster but offers no significant frame rate advantage over Medium, making Medium the better choice for its visual improvements. The High preset, at 100 FPS, is also viable if the user prefers better visuals over maximum smoothness.
At 1080p, the CPU is the limiting factor, so the user can afford to be aggressive with settings. The Ultra preset, at 101 FPS, is the best choice for maximum visual quality, as it is still above 100 FPS and will be smooth on most displays. The High preset, at 149 FPS, offers a great balance for high refresh rate monitors. There is no practical reason to use Low or Medium at 1080p, as the CPU prevents the GPU from being fully utilized, and the visual compromise is not worth the minor FPS gain. The data clearly shows that the Medium preset at 1440p or 4K provides the best balance of visual quality and performance for this specific combination of CPU and GPU.
Hardware Specifications
AMD Ryzen 5 7400F
AMD Radeon RX 7900 XTX
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + AMD Radeon RX 7900 XTX in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 95.0 |
| 3840x2160 | Medium | 84.0 |
| 3840x2160 | High | 57.0 |
| 3840x2160 | Ultra | 39.0 |
| 2560x1440 | Low | 165.0 |
| 2560x1440 | Medium | 147.0 |
| 2560x1440 | High | 100.0 |
| 2560x1440 | Ultra | 68.0 |
| 1920x1080 | Low | 245.0 |
| 1920x1080 | Medium | 219.0 |
| 1920x1080 | High | 149.0 |
| 1920x1080 | Ultra | 101.0 |
Archeage with Ryzen 5 7400F + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 7900 XTX + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + RX 7900 XTX
Explore FPS benchmarks for other games using this same hardware combination.