Archeage

# Archeage with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3070

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 3070 delivers a playable but uneven experience in Archeage, a 2014 MMORPG that scales surprisingly hard with both CPU and GPU resources. The measured frame rates show a clear pattern: this combo is capable of high refresh rates at 1080p, but struggles to maintain smooth gameplay at 4K, particularly at higher quality presets. The data reveals a system that is well-balanced at lower resolutions, but increasingly GPU-limited as resolution climbs, with the 8 GB VRAM buffer becoming a notable constraint at 4K Ultra settings.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and decisive. At Low settings, the average frame rate falls from 173 FPS at 1920x1080 to 116 FPS at 2560x1440, then down to 67 FPS at 3840x2160. That represents a 61% reduction from 1080p to 4K at Low settings, which is substantial but still leaves the game playable at 4K. The Medium preset shows a similar trajectory: 154 FPS at 1080p, 104 FPS at 1440p, and 59 FPS at 4K — a 62% drop across the resolution range. High settings follow the same pattern with 105 FPS at 1080p, 70 FPS at 1440p, and 40 FPS at 4K, a 62% decline.

The Ultra preset tells a more punishing story. Starting at 71 FPS at 1080p, it drops to 48 FPS at 1440p and collapses to 28 FPS at 4K. That is a 61% reduction from 1080p to 4K, but the absolute numbers are far more concerning — 28 FPS at 4K Ultra is below the threshold for comfortable gameplay in an MMORPG where quick reactions matter. The scaling pattern across all presets is strikingly consistent: roughly a 60% performance loss when moving from 1080p to 4K. This uniformity suggests that the limiting factor scales predictably with pixel count, which points to the GPU as the primary bottleneck at higher resolutions.

At 1080p, the gap between Low and Ultra is 102 FPS (173 vs 71), indicating that the CPU has enough headroom to feed the GPU at lower resolutions, and the graphics card becomes the limiting factor. At 4K, the gap narrows to 39 FPS (67 vs 28), which suggests that the GPU is so heavily loaded at 4K that even reducing settings from Low to Ultra doesn't yield the same relative benefit. The data clearly shows that resolution scaling is the dominant factor in this combo's performance profile, with the RTX 3070 unable to maintain 60 FPS at 4K on any preset tested.

GPU Role

The NVIDIA GeForce RTX 3070, built on the Ampere architecture with an 8 nm process from Samsung, is the component that determines the ceiling at higher resolutions. Its 8 GB of GDDR6 memory on a 256-bit bus delivers 448.0 GB/s of bandwidth, which proves sufficient for 1080p and 1440p but becomes a limiting factor at 4K. The GPU's 5888 shading units and 96 ROPs drive the pixel rate of 165.6 GPixel/s, yet the measured results show that 4K Ultra at 28 FPS avg is far from smooth. The boost clock of 1725 MHz (base 1500 MHz) is typical for this class of card, and the 220 W TDP is modest by modern standards.

The GPU's benchmark pedigree supports the gaming results. Its Passmark G3D score of 22214 places it at the 61st percentile among all GPUs, with an average benchmark score of 17208. Its nearest rivals in synthetic tests are the AMD Radeon RX 7600 XT (0.7% higher score), NVIDIA GeForce GTX 690 (1% higher), and AMD Radeon HD 7970M (1.1% higher), while the NVIDIA Tesla K40c lags by 1.5%. In DirectX 12 Passmark testing, the card scores 85, while DirectX 11 and DirectX 10 scores are 182 and 150 respectively, and DirectX 9 reaches 247. The Geekbench OpenCL score of 112821 and Vulkan score of 21022 indicate solid compute capabilities, but the game's 2014 vintage means it likely relies on older API paths.

The VRAM situation is critical. At 4K Ultra, the 8 GB frame buffer is likely saturated, which explains the precipitous drop to 28 FPS. The 4K Medium result of 59 FPS with a minimum of 50 FPS shows that reducing texture quality and other memory-hungry settings can alleviate the pressure, but the card still cannot sustain 60 FPS at 4K. At 1440p, the GPU has more headroom: Low hits 116 FPS, Medium 104 FPS, and High 70 FPS, with Ultra at 48 FPS. The 1440p Medium minimum of 88 FPS and maximum of 119 FPS show that the card can handle this resolution with decent consistency, though Ultra remains a stretch. The RTX 3070's 3DMark Steel Nomad DX12 score of 3162 and Passmark G2D score of 1001 round out its profile, but the gaming data is the clearest indicator: this is a 1080p-to-1440p card for Archeage, not a 4K solution.

CPU Role

The AMD Ryzen 5 7400F is a 7000-series desktop processor with 6 cores and 12 threads, built on the Zen 4 Raphael architecture using TSMC's 5 nm process. Its base clock of 3.70 GHz boosts to 4.70 GHz, and the 65 W TDP makes it an efficient choice. The cache layout includes 64 KB L1 per core, 1 MB L2 per core, and 32 MB shared L3, which provides ample on-die storage for game data. Memory support is DDR5 with dual-channel configuration, offering 83.2 GB/s of bandwidth — a significant advantage for MMORPGs that often stream large world data.

The CPU's synthetic benchmarks are strong. Cinebench R23 multicore reaches 21765, while single-core hits 3072. In Cinebench R20, the scores are 9141 multicore and 1290 single-core, and R15 shows 2193 multicore and 309 single-core. Passmark results include a multithread score of 25645, single-thread of 3689, and physics score of 1660. The processor sits at the 83rd percentile among all CPUs with an average benchmark score of 32750. Its nearest rivals are tightly clustered: the Intel Core i5-14600T is 0.1% higher, the Intel Core Ultra 7 155H is 0.2% higher, the AMD Ryzen AI 7 PRO 360 is 0.3% higher, and the AMD Ryzen 7 PRO 6850H is 0.2% lower. This places the 7400F in a competitive mid-range tier.

In Archeage, the CPU's role is evident at lower resolutions where the GPU is less stressed. At 1080p Low, the 173 FPS average indicates that the CPU can drive frame rates well beyond what the GPU delivers at higher settings. The 1080p Medium result of 154 FPS with a minimum of 131 FPS shows that the CPU maintains decent frame pacing even when the GPU is more loaded. However, the 1080p Ultra result of 71 FPS is notably lower than the 105 FPS at High, suggesting that certain Ultra settings impose a heavy load on the CPU as well, likely due to increased draw calls and physics calculations in a crowded MMORPG world. The single-thread performance of 3072 in Cinebench R23 is crucial for Archeage, as older MMOs often rely heavily on a few threads for game logic and rendering commands.

The 12 threads provide headroom for background tasks and the game's network and asset streaming, but the data shows that the 7400F is not the primary bottleneck in most scenarios. The Passmark find prime numbers score of 191 and data compression score of 289999 indicate strong general processing capability, while extended instructions score of 21747 and floating point math of 45799 round out the CPU's profile. The fact that 1080p Low reaches 173 FPS while 4K Low drops to 67 FPS proves that the GPU becomes the limiting factor as pixel count rises, not the CPU. The 7400F's performance is sufficient to avoid being the weak link at 1080p, and it only marginally constrains the system at 1440p and 4K.

Measured FPS Breakdown

The measured frame rates provide a complete picture across three resolutions and four settings presets. At 1920x1080, the Low preset delivers an average of 173 FPS, which is excellent for fast-paced gameplay. Medium drops to 154 FPS with a minimum of 131 FPS and maximum of 177 FPS, showing solid consistency. High settings produce 105 FPS, while Ultra falls to 71 FPS. The gap between High and Ultra is 34 FPS, indicating that the Ultra preset demands significant additional resources for marginal visual gains.

At 2560x1440, the performance is still respectable but with a clear step down. Low averages 116 FPS, Medium averages 104 FPS with a minimum of 88 FPS and maximum of 119 FPS, High averages 70 FPS, and Ultra averages 48 FPS. The 1440p Medium result is notable: the minimum of 88 FPS ensures that even in busy scenes, the game remains playable, though the 31 FPS range between minimum and maximum suggests some variability. The 1440p High result of 70 FPS is acceptable for an MMORPG, but Ultra at 48 FPS is borderline, with potential dips below 40 FPS in crowded areas.

At 3840x2160, the RTX 3070 struggles. Low averages 67 FPS, which is technically playable but not smooth. Medium averages 59 FPS with a minimum of 50 FPS and maximum of 68 FPS — the narrow 18 FPS range indicates that the GPU is consistently near its limit. High averages 40 FPS, which is below the preferred 60 FPS threshold for action games. Ultra averages 28 FPS, which is unplayable for most users. The data shows a clear hierarchy: 1080p is where this combo shines, 1440p is the practical ceiling for high settings, and 4K is only viable at Low settings. The minimum FPS values, where available, show that the system doesn't suffer from catastrophic stutters but rather sustained performance at lower levels.

How This Combo Ranks

In the database of tested combinations for Archeage, this pairing of AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 ranks 1589 out of 3708 combos. That places it in the 57th percentile of all tested configurations, meaning roughly 43% of combos perform better and 57% perform worse. This ranking reflects the mid-range nature of both components: the CPU is at the 83rd percentile among all CPUs, while the GPU is at the 61st percentile among all GPUs. The combination lands slightly below the average tier, which is consistent with the measured FPS results showing solid 1080p performance but weak 4K capability.

The ranking is influenced by the game's age and optimization. Archeage, released in 2014, may not fully utilize modern hardware, and the data suggests that the RTX 3070's 8 GB VRAM is a limiting factor at higher resolutions. The combo's rank of 1589 out of 3708 indicates that many other pairings deliver better results, likely including those with more powerful GPUs or more VRAM. The CPU's strong synthetic scores — 21765 in Cinebench R23 multicore and 3072 in single-core — do not translate into top-tier gaming performance in this title, which reinforces the notion that the GPU is the primary constraint. The 7400F's 6 cores and 12 threads are sufficient, but the RTX 3070's 8 GB buffer and 448.0 GB/s bandwidth are mid-pack for a 2020-era card.

Settings Recommendations

Based on the measured data, the optimal settings for this combo depend heavily on the target resolution. At 1920x1080, the High preset at 105 FPS delivers the best balance of visual quality and performance — it is 34 FPS slower than Medium but provides noticeably better graphics, and it is 34 FPS faster than Ultra, which only offers marginal improvements. For users seeking maximum frame rates, Low at 173 FPS is the choice, but the visual sacrifices are substantial. Medium at 154 FPS is a strong middle ground, with a minimum of 131 FPS ensuring smooth gameplay even in crowded areas.

At 2560x1440, the High preset at 70 FPS is the recommended choice for most users, as it maintains playability while offering good visuals. Medium at 104 FPS is better for competitive play or high-refresh-rate monitors, with a minimum of 88 FPS providing headroom for demanding scenes. Ultra at 48 FPS is best avoided, as the performance drop below 60 FPS is noticeable in an MMORPG where smooth camera movement is important. Low at 116 FPS is viable for maximum responsiveness, but the visual quality suffers considerably.

At 3840x2160, the Low preset at 67 FPS is the only viable option, and even then, it is just above the 60 FPS threshold. Medium at 59 FPS is borderline — the minimum of 50 FPS means dips below 60 are likely, which can cause perceptible stuttering. High at 40 FPS and Ultra at 28 FPS are not recommended for general play. The data suggests that 4K should be avoided with this combo unless the user is willing to accept Low settings. For the best overall experience, 1440p High at 70 FPS offers the strongest combination of visual fidelity and performance, while 1080p High at 105 FPS is the safest choice for consistent smoothness.