Archeage

Archeage

AVERAGE FPS
79
good

This combination provides smooth gameplay with an average of 79 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 38 56 59
1440p QHD 46 62 94 107
1080p Full HD 66 96 140 152

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 59
3840x2160 Medium 56
3840x2160 High 38
3840x2160 Ultra 27
2560x1440 Low 107
2560x1440 Medium 94
2560x1440 High 62
2560x1440 Ultra 46
1920x1080 Low 152
1920x1080 Medium 140
1920x1080 High 96
1920x1080 Ultra 66

Archeage with AMD Ryzen 5 2600 + AMD Radeon RX 6700 XT, In-Depth Analysis

The AMD Ryzen 5 2600 paired with the AMD Radeon RX 6700 XT delivers a playable but uneven experience in Archeage, a 2014 MMORPG. At 1080p, the combo is heavily CPU-bound, with frame rates scaling more from settings than resolution. At 4K, the GPU becomes the limiting factor, and the gap between Low and Ultra settings widens dramatically. This analysis breaks down the measured data to show where the bottleneck sits and what it means for actual gameplay.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep but not uniform across settings. At Low settings, the average FPS falls from 152.1 at 1920x1080 to 107 at 2560x1440, then to 59 at 3840x2160. That is a 61% reduction from 1080p to 4K. At High settings, the drop is from 95.5 to 61.9 to 38.4, a 60% reduction. The pattern is consistent: each resolution step costs roughly 35-40% of the remaining performance. This suggests the GPU is the primary limiter at higher resolutions, but the CPU still has a role.

The interesting divergence appears at Medium and Ultra settings. Medium goes from 139.7 at 1080p to 94.2 at 1440p to 56 at 4K — a 60% drop from 1080p to 4K. Ultra, however, behaves differently: 65.9 at 1080p, 45.7 at 1440p, and 26.9 at 4K. That is a 59% reduction, but the absolute numbers are much lower. The gap between Low and Ultra at 1080p is 86.2 FPS, while at 4K it is only 32.1 FPS. This compression indicates that at 4K, even Low settings cannot fully escape the GPU ceiling, while at 1080p, the CPU keeps the frame rate high enough for settings to matter more.

Benchmark results indicate that the scaling from 1080p to 1440p is nearly linear for all settings, with roughly 30-35% fewer frames. The step from 1440p to 4K is slightly larger in percentage terms, especially at Low (107 to 59, a 45% drop). This suggests that the RX 6700 XT’s memory bandwidth of 384.0 GB/s becomes a limiting factor as pixel count rises. The card has 12 GB of GDDR6 on a 192-bit bus, which is ample for this game but not sufficient to maintain high frame rates at 4K Ultra.

GPU Role

The RX 6700 XT is a RDNA 2.0 part built on a 7 nm process, with a base clock of 2321 MHz, a game clock of 2424 MHz, and a boost clock of 2581 MHz. It has 2560 shading units, 160 TMUs, and 64 ROPs. The pixel rate is 165.2 GPixel/s, and the texture rate is 413.0 GTexel/s. These specs align with the measured data: at 1080p Low, the card produces 152.1 FPS, which is high but not maxed out. At 4K Ultra, it falls to 26.9 FPS, a clear sign that the GPU is saturated.

The VRAM configuration — 12 GB GDDR6 with 384.0 GB/s bandwidth — is more than enough for Archeage, which launched in 2014. The game does not appear to be VRAM-limited, as the frame rate drops proportionally with resolution rather than hitting a hard wall. The memory clock is 2000 MHz, or 16 Gbps effective, which is standard for this class. The card’s FP32 throughput of 13.21 TFLOPS is the main driver of rasterization performance, and the data shows it scales as expected.

Compared to its nearest rivals in the GPU benchmark database, the RX 6700 XT sits at 77th percentile among all GPUs. Its average benchmark score is 33721, which is 0.7% ahead of the AMD Radeon RX 6800 and 1.3% ahead of the NVIDIA RTX A5000. It trails the AMD Radeon HD 7950 and RX 480 by 1% each, though those are older cards with different driver support. In this game, the GPU’s raw compute is adequate for 1080p and 1440p gaming, but 4K pushes it beyond its comfort zone.

The card’s power draw is 230 W, with a suggested PSU of 550 W, but that is irrelevant to frame rates. What matters is that at 4K High, the card delivers 38.4 FPS, which is playable for an MMORPG but not smooth. At 4K Low, 59 FPS is borderline acceptable. The boost clock of 2581 MHz is sustained in lighter scenes but likely throttles under sustained load, which explains why Ultra settings at 4K fall to 26.9 FPS — a 55% drop from High.

FAQ

Q: Is this combo better at 1080p or 1440p?

A: The data shows 1080p is significantly stronger. At Medium settings, 1080p yields 139.7 FPS versus 94.2 at 1440p. Even at High, the gap is 95.5 to 61.9. For a competitive edge, 1080p is the target. For visual quality with acceptable frame rates, 1440p High at 61.9 FPS is viable.

Q: Does Ultra settings make sense with this hardware?

A: Ultra is only practical at 1080p, where it averages 65.9 FPS. At 1440p, Ultra drops to 45.7 FPS, and at 4K it falls to 26.9 FPS, which is below playable for an MMORPG. Stick to High or Medium if you want consistent frame rates above 60.

Q: How much performance do you lose going from Low to Medium at 1080p?

A: Low averages 152.1 FPS, while Medium averages 139.7 FPS. That is a loss of 12.4 FPS, or about 8% of performance, for a modest visual upgrade. The step from Medium to High is larger: High drops to 95.5 FPS, a 32% reduction.

Q: Is the CPU or GPU the bottleneck in this game?

A: At 1080p Low, the frame rate of 152.1 FPS is likely CPU-limited, as the Ryzen 5 2600’s single-thread score of 1579 in Cinebench R23 suggests it cannot push much higher. At 4K, the GPU is the clear limiter, with Ultra falling to 26.9 FPS. The CPU matters more at lower resolutions.

Q: Can this combo handle 4K gaming in Archeage?

A: Not at playable frame rates for most settings. The best 4K result is Low at 59 FPS, which is playable but not ideal. High and Medium are 38.4 and 56 FPS respectively, while Ultra is 26.9 FPS. If you have a 4K display, use Low settings or drop to 1440p.

Q: How does the RX 6700 XT compare to the RX 6800 in this context?

A: The RX 6700 XT has an average benchmark score of 33721, which is 0.7% lower than the RX 6800’s 33493. This means the RX 6800 is slightly faster overall, but the difference is within noise. In this game, the measured FPS would be nearly identical.

How This Combo Ranks

The AMD Ryzen 5 2600 + AMD Radeon RX 6700 XT combination ranks 920 out of 1727 tested combos in Archeage. That places it in the 53rd percentile of all tested pairs, meaning it is slightly above the median but far from top-tier. The data indicates this is a mid-range pairing that performs adequately at 1080p but struggles at higher resolutions.

The rank of 920 reflects the CPU’s age more than the GPU’s capability. The Ryzen 5 2600, released in 2018, has a 77th percentile rank among all CPUs, but its single-thread performance is modest. The RX 6700 XT also sits at the 77th percentile among GPUs, so neither component is weak. However, Archeage is an older MMORPG that likely favors single-thread performance, where the Ryzen 5 2600’s Zen architecture is less competitive.

Compared to other combos, this pairing is beat by systems with newer CPUs that have higher single-thread scores. The nearest CPU rivals — the Intel Core i5-1345U and i5-11600KF — have similar average benchmark scores (19691 and 19740 respectively) but are within 0.6% of the Ryzen 5 2600’s 19616. This suggests that swapping the CPU for a newer model would not dramatically change the ranking unless it also has better single-thread performance.

The GPU’s ranking is more favorable. The RX 6700 XT is within 1.3% of the RTX A5000 and 0.7% of the RX 6800 in average score, but those are higher-end cards. The fact that this combo still ranks 920 suggests that the game’s engine is more sensitive to CPU performance than GPU raw power. If you were to upgrade the CPU to a newer model, the rank would likely improve significantly.

CPU Role

The AMD Ryzen 5 2600 has 6 cores and 12 threads, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. It is a Zen+ architecture part on a 12 nm process, with 16 MB of shared L3 cache. Its memory bandwidth is 46.9 GB/s on a dual-channel DDR4 interface. These specs are modest by modern standards, but they are sufficient for an MMORPG like Archeage, which does not heavily utilize multi-threading.

The single-thread performance is the key metric here. In Cinebench R23, the Ryzen 5 2600 scores 1579 in single-core and 11186 in multi-core. The multi-core score is decent, but the single-core score is low compared to newer CPUs. For a game that relies on a single main thread, this limits the maximum frame rate. The measured data supports this: at 1080p Low, the frame rate is 152.1 FPS, which is likely near the CPU’s ceiling.

The CPU’s average benchmark score is 19616, placing it at the 77th percentile. Its nearest rival, the Intel Core i5-1345U, scores 19691, which is 0.4% higher. The AMD Ryzen 5 7530U scores 19508, 0.6% lower. This tight grouping shows that the Ryzen 5 2600 is not an outlier; it is a typical mid-range CPU from its generation. However, the boost clock of 3.90 GHz is relatively low, and the Zen+ architecture has lower instructions-per-clock than newer designs.

In Archeage, the CPU’s role is to feed the GPU. At 1080p, the CPU can generate enough frames to keep the GPU busy, as shown by the 152.1 FPS at Low settings. At 4K, the CPU is less of a factor, and the GPU takes over as the bottleneck. The 12 threads help with background tasks, but the game likely uses only a few cores. The L3 cache of 16 MB is adequate, but not large enough to compensate for the lower clock speeds.

Measured FPS Breakdown

The measured data covers three resolutions and four settings levels. At 1920x1080, the results are: Low 152.1 FPS, Medium 139.7 FPS, High 95.5 FPS, and Ultra 65.9 FPS. The step from Low to Medium is 12.4 FPS, which is modest. The step from Medium to High is 44.2 FPS, a much larger drop. The step from High to Ultra is 29.6 FPS. This suggests that High settings introduce a significant rendering cost, likely from shadows or ambient occlusion, while Ultra adds even more.

At 2560x1440, the results are: Low 107 FPS, Medium 94.2 FPS, High 61.9 FPS, and Ultra 45.7 FPS. The pattern is similar, but the absolute numbers are lower. Low to Medium is 12.8 FPS, Medium to High is 32.3 FPS, and High to Ultra is 16.2 FPS. The gap between Medium and High is the largest, indicating a substantial quality jump that impacts performance.

At 3840x2160, the results are: Low 59 FPS, Medium 56 FPS, High 38.4 FPS, and Ultra 26.9 FPS. Here, Low and Medium are close (3 FPS difference), but High drops by 17.6 FPS, and Ultra drops by 11.5 FPS further. The 4K data shows that the GPU is the limiting factor, as even Low settings cannot exceed 60 FPS.

Comparing settings across resolutions, the performance loss from 1080p to 4K at Low is 93.1 FPS, at Medium it is 83.7 FPS, at High it is 57.1 FPS, and

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 6700 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2581 MHz MHz
TDP 230 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 6700 XT in Archeage

Resolution Settings Avg FPS
3840x2160 Low 59.0
3840x2160 Medium 56.0
3840x2160 High 38.4
3840x2160 Ultra 26.9
2560x1440 Low 107.0
2560x1440 Medium 94.2
2560x1440 High 61.9
2560x1440 Ultra 45.7
1920x1080 Low 152.1
1920x1080 Medium 139.7
1920x1080 High 95.5
1920x1080 Ultra 65.9

Archeage with Ryzen 5 2600 + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RX 6700 XT + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RX 6700 XT

Explore FPS benchmarks for other games using this same hardware combination.