Archeage
This combination provides smooth gameplay with an average of 65 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 19 | 28 | 43 | 53 |
| 1440p QHD | 37 | 55 | 78 | 85 |
| 1080p Full HD | 56 | 78 | 114 | 130 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 2600 + AMD Radeon RX 6600 XT, In-Depth Analysis
The AMD Ryzen 5 2600 paired with the AMD Radeon RX 6600 XT ranks 1223rd out of 1727 tested combinations in Archeage. This places the combo in the lower third of the database, indicating that while it can run the game, it does not deliver top-tier performance relative to other systems tested. The ranking reflects a pairing where the CPU, a 2018 release, and the GPU, a 2021 release, produce a result that is competent but far from the leaderboard’s upper echelons. For an MMORPG that is over a decade old, this position suggests the hardware is sufficient for casual play but will struggle under demanding conditions or at maximum settings.
GPU Role
The AMD Radeon RX 6600 XT is built on the RDNA 2.0 architecture with a Navi 23 chip manufactured on a 7 nm process. Its memory configuration includes 8 GB of GDDR6 on a 128-bit bus, delivering 256.0 GB/s of bandwidth. The GPU’s clocks are notably high: a base of 1968 MHz, a game clock of 2359 MHz, and a boost clock of 2589 MHz. This boost clock is particularly relevant for Archeage, as the game’s engine tends to favor higher-frequency GPUs when settings are not maxed out.
The GPU’s benchmark profile shows a 3DMark Steel Nomad DX12 score of 1804 and a Passmark G3D score of 16461. In terms of rival comparisons, the RX 6600 XT sits just 0.1% ahead of the NVIDIA GeForce GTX 980 Ti in average score, and 0.4% ahead of the AMD Radeon R9 M395X. It trails the NVIDIA GeForce RTX 3070 by 0.9% and the AMD FirePro S7150 by 1.5%. These narrow deltas indicate that the GPU is competitive with older high-end cards but lags newer mid-range options.
In Archeage, the GPU’s 8 GB VRAM is adequate for the game’s textures, but the 128-bit memory bus may become a limiting factor at higher resolutions. The data shows that at 1080p Ultra, the FPS drops to 55.7, which suggests the GPU is working hard to maintain visual fidelity. The GPU’s 64 ROPs and 128 TMUs are sufficient for the game’s draw calls, but the 10.60 TFLOPS FP32 performance is the ceiling for this pairing.
Resolution Scaling
The measured FPS data reveals a consistent and predictable scaling pattern as resolution increases. At 1080p Low, the combo achieves 130.4 FPS, but this falls to 85.4 FPS at 1440p Low and 52.6 FPS at 4K Low. This represents a 34.5% drop from 1080p to 1440p and a further 38.4% drop from 1440p to 4K. This scaling indicates that the GPU is the primary bottleneck at lower settings, as the CPU has less work to do and the frame rate is largely determined by the GPU’s fill rate.
At High settings, the pattern shifts. The combo delivers 78.2 FPS at 1080p, which drops to 54.8 FPS at 1440p (a 30% reduction) and 27.6 FPS at 4K (a 49.6% reduction from 1440p). The larger percentage drop from 1440p to 4K at High settings suggests the GPU is becoming increasingly stressed, but the CPU is also contributing to the slowdown. At Ultra settings, the frame rates are 55.7 FPS at 1080p, 37.4 FPS at 1440p, and 19.1 FPS at 4K. The scaling here is more linear, with each resolution step costing roughly 33-49% performance, indicating a balanced load between CPU and GPU.
The data shows that the limiting component changes with settings. At Low and Medium, the GPU is clearly the constraint, as evidenced by the steep FPS drops at higher resolutions. At Ultra, the CPU begins to matter more, as the Ryzen 5 2600’s 12 threads are taxed by the game’s complex simulations and NPC logic, preventing the GPU from reaching its full potential.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of the combo’s performance across three resolutions and four settings presets. At 1920x1080, the combo starts with 130.4 FPS at Low settings, which is the highest frame rate recorded in the entire dataset. Medium settings produce 113.8 FPS, High settings yield 78.2 FPS, and Ultra settings drop to 55.7 FPS. The gap between Low and Ultra is 74.7 FPS, which is a 57.3% performance penalty for maximum visual quality.
At 2560x1440, the frame rates are 85.4 FPS at Low, 78.1 FPS at Medium, 54.8 FPS at High, and 37.4 FPS at Ultra. The difference between Low and Ultra here is 48 FPS, a 56.2% reduction. Notably, the gap between Low and Medium at 1440p is only 7.3 FPS, which is much smaller than the 16.6 FPS gap at 1080p. This suggests that at higher resolutions, the GPU’s memory bandwidth becomes a limiting factor, reducing the benefit of lowering settings from Low to Medium.
At 3840x2160, the results are 52.6 FPS at Low, 42.6 FPS at Medium, 27.6 FPS at High, and 19.1 FPS at Ultra. The 4K Low result is the only configuration above 50 FPS at this resolution, and it still falls short of a smooth 60 FPS target. The Ultra preset at 4K produces a nearly unplayable 19.1 FPS, indicating that this combo is not suitable for 4K gaming in Archeage at maximum settings. The scaling from 1080p to 4K at Ultra is a 65.7% performance drop, from 55.7 to 19.1 FPS.
FAQ
Q: What is the best resolution and settings combination for this hardware in Archeage?
A: Based on the data, 1920x1080 at Medium settings delivers 113.8 FPS, which is the highest frame rate above 100 FPS with reasonable visual quality. For a smoother experience, Low settings at 1080p yields 130.4 FPS, but the visual compromise may not be worth the extra 16.6 FPS.
Q: Can this combo handle 4K gaming in Archeage?
A: At 4K, the combo only achieves 52.6 FPS at Low settings and 42.6 FPS at Medium. High settings drop to 27.6 FPS, and Ultra is unplayable at 19.1 FPS. Therefore, 4K is only viable with Low or Medium settings, and even then, the frame rates are below the ideal 60 FPS threshold.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 5 2600 has an average benchmark score of 19616. It is 0.4% behind the Intel Core i5-1345U, 0.6% ahead of the AMD Ryzen 5 7530U, 0.6% behind the Intel Core i5-11600KF, and 0.7% ahead of the Intel Core i7-10700F. These deltas are minimal, showing the CPU is competitive with these processors.
Q: What is the GPU’s performance relative to its nearest rivals?
A: The RX 6600 XT has an average benchmark score of 27985. It is 0.1% ahead of the NVIDIA GeForce GTX 980 Ti, 0.4% ahead of the AMD Radeon R9 M395X, 0.9% behind the NVIDIA GeForce RTX 3070, and 1.5% behind the AMD FirePro S7150. The GPU is essentially neck-and-neck with the GTX 980 Ti.
Q: Does the CPU or GPU bottleneck the combo in Archeage?
A: At Low and Medium settings, the GPU is the clear bottleneck, as frame rates drop sharply with resolution. At Ultra settings, the CPU becomes more relevant, as the Ryzen 5 2600’s 6 cores and 12 threads are taxed by the game’s logic, limiting the GPU from reaching higher frame rates.
Q: Is the combo’s ranking in the database indicative of poor performance?
A: The rank of 1223 out of 1727 puts it in the 29th percentile, which is below average. However, the measured FPS at 1080p Medium and High are playable, so the ranking reflects the combination’s overall standing against all tested combos, many of which feature newer or higher-end hardware.
CPU Role
The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen+ architecture, manufactured on a 12 nm process. Its base clock is 3.40 GHz with a boost clock of 3.90 GHz, and it has 16 MB of shared L3 cache. The CPU’s synthetic benchmarks show a Cinebench R23 multi-core score of 11186 and a single-core score of 1579. In Passmark, it scores 13160 in multithread and 2239 in single-thread tests. These numbers place the CPU in the 77th percentile of all CPUs, which is respectable for a 2018 release.
In Archeage, the CPU’s role is most apparent when comparing the Ultra settings results across resolutions. At 1080p Ultra, the combo produces 55.7 FPS, which is only 18.7% lower than the 78.2 FPS at High settings. This relatively small drop suggests that the CPU is not the primary limiter at 1080p. However, at 4K Ultra, the FPS falls to 19.1, a 65.7% drop from 1080p Ultra. This large drop indicates that the CPU cannot keep up with the GPU’s rendering demands at higher resolutions when settings are maxed out.
The CPU’s 12 threads are beneficial for an MMORPG like Archeage, which handles many simultaneous entities. The Passmark physics score of 673 and data compression score of 187062 reflect the CPU’s capability in handling complex calculations. Compared to its nearest rivals, the Ryzen 5 2600 is remarkably close in performance: it is only 0.4% behind the Intel Core i5-1345U and 0.6% behind the Intel Core i5-11600KF, while being 0.6% ahead of the AMD Ryzen 5 7530U and 0.7% ahead of the Intel Core i7-10700F. This indicates that for Archeage, the CPU is a balanced component that neither excels nor severely bottlenecks the overall system, but its age does show at extreme settings.
Hardware Specifications
AMD Ryzen 5 2600
AMD Radeon RX 6600 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 6600 XT in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 52.6 |
| 3840x2160 | Medium | 42.6 |
| 3840x2160 | High | 27.6 |
| 3840x2160 | Ultra | 19.1 |
| 2560x1440 | Low | 85.4 |
| 2560x1440 | Medium | 78.1 |
| 2560x1440 | High | 54.8 |
| 2560x1440 | Ultra | 37.4 |
| 1920x1080 | Low | 130.4 |
| 1920x1080 | Medium | 113.8 |
| 1920x1080 | High | 78.2 |
| 1920x1080 | Ultra | 55.7 |
Archeage with Ryzen 5 2600 + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 6600 XT + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RX 6600 XT
Explore FPS benchmarks for other games using this same hardware combination.