Thief

How This Combo Ranks

This AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5090 D combination sits at rank 176 out of 2851 tested combos in Thief, placing it comfortably in the top 6.2% of all configurations. That is a strong result for a 2014 stealth title, though the ranking reveals more about the GPU's dominance than the CPU's contribution. The RTX 5090 D carries an average benchmark score of 77712, which puts it at the 92nd percentile among all GPUs, while the Ryzen 5 7500F scores 24964 on average, ranking at the 77th percentile among CPUs. The GPU is the clear anchor here, and the data reflects that.

Looking at the measured frames per second, this combo delivers 154 FPS at 1080p High, 136 FPS at 1440p High, and 92 FPS at 4K High. Those numbers show a steady decline as resolution climbs, which is typical for a GPU-bound scenario. The RTX 5090 D's nearest rivals in the database include the AMD Radeon RX 6650M XT with a deltaPct of 1.1, the AMD Radeon RX 6850M XT at -1.6, and two NVIDIA Tesla P100 variants at -2.1 and -2.4. That means the 5090 D is only about 1% slower than the RX 6650M XT in aggregate benchmarks, yet the measured FPS in Thief are far higher than what a laptop-class GPU would typically produce. The aggregate score does not tell the whole story for this specific title.

For the CPU, the Ryzen 5 7500F's nearest rivals are tightly clustered: the Intel Core i7-11850H is 0.1% ahead, the AMD Ryzen 5 8400F is 0.2% behind, the Intel Core i7-13620H is 0.2% ahead, and the Intel Core 5 210H is 0.4% ahead. These deltas are negligible, meaning the 7500F is essentially tied with those processors in general compute. In Thief, though, the CPU is not the bottleneck at any resolution, as the FPS scaling shows the GPU taking over as the limiting factor beyond 1080p.

The combo rank of 176 is impressive, but it is notably Thief is an older title with modest hardware demands. The RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are overkill for this game, yet the benchmark results show the GPU still scales with resolution. At 4K Ultra, the combo drops to 87 FPS, which is still smooth but represents a 38% reduction from 1080p Ultra's 151 FPS. The data indicates this combo is more than sufficient for Thief at any setting, and the rank reflects that headroom.

Settings Recommendations

The measured rows provide four preset levels—Low, Medium, High, and Ultra—across three resolutions. The best experience per the data is High settings, not Ultra. At 1080p High, the combo delivers 154 FPS, while Ultra drops to 151 FPS, a difference of only 2%. At 1440p, High yields 136 FPS versus Ultra's 133 FPS, again a 2% gap. At 4K, High produces 92 FPS while Ultra falls to 87 FPS, a 5% difference. The visual fidelity gain from High to Ultra costs only a handful of frames, but the data shows High is the sweet spot because it maintains higher average FPS across all resolutions with no min FPS penalty recorded.

Medium settings offer a different trade-off. At 1080p Medium, the combo hits 170 FPS with a min of 144 and max of 195, which is the highest average at that resolution. At 1440p Medium, it reaches 150 FPS with a min of 127 and max of 172. At 4K Medium, it delivers 120 FPS with a min of 102 and max of 138. The Medium preset provides the only min FPS data in the entire measured set, and those minimums are all above 100 FPS, indicating consistent frame pacing. For competitive play or high-refresh displays, Medium is the recommended preset because it maximizes average FPS while keeping minimums well above playable thresholds.

Low settings push the combo even further. At 1080p Low, it reaches 188 FPS, at 1440p Low it hits 166 FPS, and at 4K Low it manages 139 FPS. These numbers are high, but the visual downgrade is significant for a stealth game where lighting and shadows matter. The data suggests Low is unnecessary for this hardware, as even Ultra at 4K stays above 85 FPS. The best overall experience, balancing smoothness and fidelity, is High at 1440p or 4K, where the combo stays above 90 FPS. For those prioritizing maximum frame rates, Medium at 1080p or 1440p offers the best combination of high averages and recorded minimums.

Resolution Scaling

The FPS drop from 1080p to 4K reveals the limiting component clearly. At High settings, the combo delivers 154 FPS at 1080p, 136 FPS at 1440p, and 92 FPS at 4K. That is a 40% reduction from 1080p to 4K, which is substantial and points to the GPU as the primary constraint. From 1080p to 1440p, the drop is 18 FPS (12%), and from 1440p to 4K, it is 44 FPS (32%). The steeper decline at higher resolutions indicates the RTX 5090 D is being pushed harder as pixel count increases, while the Ryzen 5 7500F remains capable of feeding it frames.

At Ultra settings, the pattern is similar but more pronounced. The combo produces 151 FPS at 1080p, 133 FPS at 1440p, and 87 FPS at 4K. The 1080p to 1440p drop is 18 FPS (12%), and the 1440p to 4K drop is 46 FPS (35%). The larger percentage loss at 4K Ultra suggests that the GPU's shading units and ROPs are the limiting factor, not the CPU. The RTX 5090 D has 21760 shading units and 176 ROPs, which are massive numbers, but Thief's engine still scales with resolution in a way that taxes the GPU more than the CPU.

Low settings show a different scaling curve. The combo achieves 188 FPS at 1080p, 166 FPS at 1440p, and 139 FPS at 4K. The 1080p to 1440p drop is 22 FPS (12%), and the 1440p to 4K drop is 27 FPS (16%). The smaller percentage loss at 4K Low indicates that at lower settings, the CPU begins to play a larger role, and the Ryzen 5 7500F's 6 cores and 12 threads are sufficient to keep frame rates high. The data shows that at Low settings, the resolution scaling is more linear, suggesting a more balanced load between CPU and GPU.

The limiting component is the GPU at High and Ultra settings, but at Low settings, the CPU becomes more relevant. The Ryzen 5 7500F's boost clock of 5.00 GHz and single-thread score of 974 in 3dmark help maintain high frame rates even at 1080p Low, where the combo reaches 188 FPS. However, the GPU's 104.8 TFLOPS of FP32 performance is what drives the 4K High result of 92 FPS. The data indicates that for this game, the RTX 5090 D is the bottleneck at higher resolutions and settings, while the CPU handles lower settings without issue.

FAQ

Q: How does this combo rank among all tested configurations in Thief?

A: It ranks 176 out of 2851 tested combos, placing it in the top 6.2% of all configurations. The rank reflects the RTX 5090 D's 92nd percentile GPU score and the Ryzen 5 7500F's 77th percentile CPU score.

Q: What is the best settings preset for this combo?

A: High settings provide the best balance, with 154 FPS at 1080p, 136 FPS at 1440p, and 92 FPS at 4K. Medium settings offer higher average FPS (170 at 1080p, 150 at 1440p, 120 at 4K) with recorded minimums above 100 FPS, making it the choice for maximum smoothness.

Q: Is the CPU or GPU the limiting factor in Thief?

A: The GPU is the limiting factor at High and Ultra settings, as shown by the 40% FPS drop from 1080p to 4K at High. At Low settings, the CPU becomes more relevant, with a smaller 26% drop from 1080p to 4K, indicating the Ryzen 5 7500F can keep up.

Q: How does the RTX 5090 D compare to its nearest rivals?

A: The RTX 5090 D has an average benchmark score of 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT and 1.6% lower than the AMD Radeon RX 6850M XT. It also trails the NVIDIA Tesla P100 PCIe 12 GB by 2.1% and the 16 GB version by 2.4%.

Q: What are the key specifications of the Ryzen 5 7500F?

A: It has 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. It features 32 MB of shared L3 cache and supports DDR5 memory with a dual-channel bus and 83.2 GB/s bandwidth.

Q: Does the combo maintain playable frame rates at 4K Ultra?

A: Yes, it delivers 87 FPS at 4K Ultra, which is above the 60 FPS threshold for smooth gameplay. The min FPS is not recorded for Ultra, but the average stays high, indicating the combo handles the most demanding preset without dropping below playable levels.

GPU Role

The NVIDIA GeForce RTX 5090 D is the dominant component in this combo, and its specifications explain why. It features 32 GB of GDDR7 memory on a 512-bit bus, delivering 1.79 TB/s of bandwidth. That memory configuration is excessive for Thief, but it ensures the GPU never runs out of memory bandwidth at any resolution. The base clock is 2017 MHz, boosting to 2407 MHz, with memory clocked at 1750 MHz (28 Gbps effective). These clocks drive 21760 shading units, 680 TMUs, and 176 ROPs, producing 104.8 TFLOPS of FP32 performance and a pixel rate of 423.6 GPixel/s.

In Thief, the GPU's role is evident in the resolution scaling. At 4K High, the combo hits 92 FPS, while at 4K Low it reaches 139 FPS, a 51% difference. That gap shows the GPU is doing the heavy lifting when settings are raised. The RTX 5090 D's nearest rivals in the database—the RX 6650M XT, RX 6850M XT, and Tesla P100 variants—have similar aggregate scores, but the 5090 D's massive memory bandwidth and shader count give it an edge in this game. The measured FPS at 1080p High (154) is more than double what a typical laptop GPU would produce, confirming the 5090 D's desktop-class performance.

The GPU's VRAM of 32 GB is more than enough for Thief, which was released in 2014 and does not demand high memory capacities. The data shows no memory-related frame drops, as the minimum FPS at Medium settings are all above 100 FPS. The 5090 D's 170 RT cores and 680 tensor cores are irrelevant for this game, which does not use ray tracing or DLSS, but they contribute to the GPU's overall benchmark score. The percentiles place the 5090 D at 92, meaning it outperforms 92% of all GPUs in the database, and that strength translates directly to Thief's frame rates.

CPU Role

The AMD Ryzen 5 7500F plays a supporting role in this combo, and its specifications show why it is not the bottleneck. It has 6 cores and 12 threads, based on the Zen 4 architecture on a 5 nm process. The base clock is 3.70 GHz, boosting to 5.00 GHz, with 64 KB of L1 cache per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. The CPU supports DDR5 memory with a dual-channel bus and 83.2 GB/s of bandwidth, which is sufficient for feeding the GPU in Thief.

Benchmark results show the 7500F is a mid-range performer. It scores 22799 in Cinebench R23 multicore and 3218 in single-core, with a Geekbench multicore score of 12362 and single-core of 2374. These numbers place it at the 77th percentile among all CPUs, with an average benchmark score of 24964. Its nearest rivals—the Intel Core i7-11850H, AMD Ryzen 5 8400F, Intel Core i7-13620H, and Intel Core 5 210H—are all within 0.4% of its score, indicating the 7500F is competitively positioned.

In Thief, the CPU's role is most apparent at lower settings and resolutions. At 1080p Low, the combo reaches 188 FPS, which requires the CPU to process frames quickly. The 7500F's boost clock of 5.00 GHz and single-thread performance (974 in 3dmark single-thread) help maintain high frame rates. However, at 4K High, the FPS drops to 92, and the GPU becomes the limiting factor. The data shows that the CPU is not holding back the GPU at any resolution, as the FPS scaling follows the GPU's expected performance curve rather than the CPU's compute limits. The 7500F's 6 cores are sufficient for Thief, which is not a heavily threaded game, and the 12 threads provide headroom for background tasks.