Evolve

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 5090 D produces a wide spread of frame rates in Evolve, ranging from 335 FPS at 1080p Low to 65 FPS at 4K Ultra. The data reveals a system that is heavily GPU-bound at higher resolutions, while the CPU’s strong single-thread performance keeps lower-resolution frame rates exceptionally high. This analysis walks through the resolution scaling, component roles, measured frame rates, ranking position, and settings recommendations based solely on the measured data.

Resolution Scaling

The transition from 1080p to 4K shows a dramatic drop in average frame rates across all settings, indicating that the GPU becomes the primary limiting factor as pixel count increases. At Low settings, the average FPS falls from 335 at 1920x1080 to 154 at 3840x2160, a reduction of 181 FPS. This represents a 54% decrease in performance, which is a clear sign that the RTX 5090 D’s rendering workload scales heavily with resolution.

At Medium settings, the scaling is similar in percentage terms. The average drops from 305 FPS at 1080p to 120 FPS at 4K, a 61% reduction. The High preset shows an even steeper relative decline, moving from 246 FPS at 1080p down to 94 FPS at 4K, which is a 62% drop. These consistent percentage losses across presets suggest that resolution scaling is uniform regardless of the graphical load, pointing squarely at the GPU as the bottleneck.

The Ultra preset exhibits the largest absolute drop, falling from 170 FPS at 1080p to just 65 FPS at 4K, a 105 FPS decrease. This 62% reduction mirrors the other presets, reinforcing that the RTX 5090 D’s compute throughput is the limiting factor. The pattern is clear: as resolution increases, the GPU must process more pixels, and the frame rate falls proportionally.

Interestingly, the gap between 1080p and 1440p is smaller than the gap between 1440p and 4K. For example, at High settings, the drop from 1080p to 1440p is 81 FPS (246 to 165), while the drop from 1440p to 4K is 71 FPS (165 to 94). This non-linear scaling suggests that the GPU’s memory bandwidth and raw pixel throughput are stressed more severely at 4K, where the 512-bit bus and 1.79 TB/s bandwidth are pushed to their limits.

The data also shows that the CPU is not the primary constraint at higher resolutions. If the Ryzen 5 7500F were the bottleneck, the frame rates would remain relatively flat across resolutions. Instead, the substantial drops indicate that the GPU is doing the heavy lifting. At 1080p, the CPU’s strong single-core performance (evidenced by a 3dmark_single_thread score of 974) allows the GPU to run at near-peak capacity, producing very high frame rates.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. In Evolve, a game released in 2015, the CPU’s role is primarily to feed the GPU with draw calls and game logic. The data suggests that the 7500F is more than capable of handling this task, as evidenced by the very high frame rates at 1080p.

At 1080p Low, the system achieves 335 FPS, which is a strong indicator that the CPU is not a limiting factor at this resolution. The 7500F’s single-thread performance, measured at 974 in the 3dmark_single_thread test and 3218 in cinebench_r23_singlecore, is sufficient to keep up with the GPU’s output. Even at 1080p Ultra, the frame rate stays at 170 FPS, which is still very high and suggests headroom in the CPU.

The CPU’s 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth likely contribute to smooth frame delivery, as Evolve’s gameplay relies on consistent data streaming. The 7500F’s 12 threads provide ample parallel processing capacity, though the game’s age means it likely doesn’t utilize all of them effectively. The benchmark results show a 3dmark_16_threads score of 6376 and a 3dmark_max_threads score of 6379, indicating that the processor scales well with thread count, but Evolve may not be optimized for more than a few cores.

Compared to its nearest rivals, the 7500F sits in a competitive position. Its average benchmark score of 24964 is nearly identical to the Intel Core i7-11850H (24935, deltaPct 0.1) and the AMD Ryzen 5 8400F (25005, deltaPct -0.2). This means the CPU is statistically tied with these alternatives in general compute tasks. In Evolve specifically, the CPU’s high boost clock of 5.00 GHz is likely the key factor, as the game’s frame rates at lower resolutions depend heavily on single-core speed.

The 7500F’s TDP of 65 W is modest, but this is not a factor in the measured frame rates. The data shows that the CPU maintains performance across all tested settings, with no indication of thermal throttling or power limitation affecting results. The processor’s percentile rank of 77 among all CPUs further confirms its solid standing for gaming workloads.

GPU Role

The NVIDIA GeForce RTX 5090 D is a massive GPU with 32 GB of GDDR7 memory on a 512-bit bus, providing 1.79 TB/s of bandwidth. Its architecture is Blackwell 2.0, built on a 5 nm process with 92,200 million transistors. The GPU’s 104.8 TFLOPS of FP32 performance and 423.6 GPixel/s pixel rate are directly relevant to Evolve’s rendering demands.

At 4K resolution, the GPU’s role is paramount. The measured frame rates at 3840x2160 range from 154 FPS at Low to 65 FPS at Ultra. This spread of 89 FPS across presets shows how much the GPU’s workload varies with graphical settings. The 32 GB VRAM is more than sufficient for Evolve, even at 4K Ultra, but the GPU’s compute units are the limiting factor at this resolution.

The GPU’s clock speeds are a base of 2017 MHz and a boost of 2407 MHz. These high clocks contribute to the strong performance at lower resolutions. At 1080p, the frame rates exceed 300 FPS at Low and Medium settings, indicating that the GPU is not fully saturated at this resolution. The bottleneck shifts to the CPU, but as shown, the 7500F handles this well.

The RTX 5090 D’s memory bandwidth of 1.79 TB/s is critical for 4K performance. The 512-bit bus and GDDR7 memory allow the GPU to feed its 21,760 shading units efficiently. The measured 4K frame rates, while lower than 1080p, are still playable, with 94 FPS at High and 120 FPS at Medium. This suggests that the GPU’s memory subsystem is not a bottleneck, but rather its raw compute power.

Compared to its nearest rivals, the RTX 5090 D has an average benchmark score of 77712, which is close to the AMD Radeon RX 6650M XT (76904, deltaPct 1.1) and the AMD Radeon RX 6850M XT (78940, deltaPct -1.6). This places the RTX 5090 D in a similar performance tier to these GPUs in synthetic benchmarks, though the actual gaming performance in Evolve is what matters here. The GPU’s percentile rank of 92 among all GPUs indicates it is a top-tier part.

The GPU’s 575 W TDP and 950 W suggested PSU are not directly reflected in the frame rate data, but they indicate the power envelope required to sustain these clocks. The data shows no signs of clock throttling, as the 4K Ultra result of 65 FPS is consistent with the scaling pattern seen at other settings.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the average frame rates are 335 FPS at Low, 305 FPS at Medium, 246 FPS at High, and 170 FPS at Ultra. The Medium preset includes a minimum of 259 FPS and a maximum of 351 FPS, showing a relatively tight frame time distribution.

At 2560x1440, the average frame rates drop to 271 FPS at Low, 210 FPS at Medium, 165 FPS at High, and 114 FPS at Ultra. The Medium preset at this resolution shows a minimum of 179 FPS and a maximum of 242 FPS. This represents a 19% reduction from 1080p at Low, a 31% reduction at Medium, a 33% reduction at High, and a 33% reduction at Ultra.

At 3840x2160, the average frame rates are 154 FPS at Low, 120 FPS at Medium, 94 FPS at High, and 65 FPS at Ultra. The Medium preset at 4K shows a minimum of 102 FPS and a maximum of 138 FPS. The 4K Low result of 154 FPS is notable because it is higher than the 1440p Ultra result of 114 FPS, showing that settings have a larger impact than resolution in some cases.

Looking at the data holistically, the Medium preset consistently offers the best balance of performance and visual quality. At 1080p, it achieves 305 FPS, which is 71 FPS higher than High and 135 FPS lower than Low. At 1440p, Medium hits 210 FPS, comfortably above the 165 FPS of High. At 4K, Medium maintains 120 FPS, which is 26 FPS higher than High and 34 FPS lower than Low.

The Ultra preset shows the most significant performance cost. At every resolution, it is the lowest-performing setting, with 170 FPS at 1080p, 114 FPS at 1440p, and 65 FPS at 4K. The gap between Ultra and High is substantial: 76 FPS at 1080p, 51 FPS at 1440p, and 29 FPS at 4K. This indicates that Ultra settings impose a heavy rendering load that the GPU struggles to maintain at higher resolutions.

The Low preset shows the highest frame rates but also the least visual fidelity. At 4K, it still achieves 154 FPS, which is playable, but the graphical quality is significantly reduced. The Medium preset at 4K, with 120 FPS, appears to be the sweet spot for high-resolution gaming, offering a 28% improvement over High while maintaining smooth gameplay.

How This Combo Ranks

The combination of the Ryzen 5 7500F and RTX 5090 D ranks 28th out of 2872 tested combos in Evolve. This places it in the top 1% of all tested configurations, which is an exceptional result. The rank of 28 means that only 27 other CPU-GPU pairings achieve higher frame rates in this specific game.

This high ranking is expected given the components involved. The RTX 5090 D is a top-tier GPU with a percentile rank of 92, and the Ryzen 5 7500F has a percentile rank of 77. The combination of a high-end GPU with a strong mid-range CPU proves effective for Evolve, as the game’s engine appears to favor the GPU’s raw throughput.

The rank suggests that the 7500F does not bottleneck the RTX 5090 D in this game. If it did, the combo would rank lower, as the GPU’s potential would be wasted. The fact that it ranks 28th indicates that the CPU is able to keep the GPU fed with data, particularly at lower resolutions where CPU overhead is more significant.

Compared to other combos in the database, this pairing sits above the vast majority of alternatives. The 2872 total combos include a wide range of CPUs and GPUs, and being in the 28th position means this setup outperforms 2844 other combinations. This is a strong endorsement of the 7500F’s ability to complement a high-end GPU like the RTX 5090 D.

The data also shows that the combo’s performance is consistent across resolutions. At 1080p, the frame rates are near the top of what is achievable in Evolve, and at 4K, they remain playable. This consistency contributes to the high rank, as the combo does not have a weak resolution where performance falls off dramatically.

FAQ

Q: What is the highest average frame rate achieved by this combo in Evolve?

A: The highest average frame rate is 335 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the combo achieves an average frame rate of 65 FPS. This is the lowest measured result across all tested configurations.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The data indicates that the GPU is not fully saturated at 1080p, as frame rates exceed 300 FPS at Low and Medium settings. The CPU’s strong single-thread performance allows these high frame rates, suggesting the CPU is not a bottleneck at this resolution.

Q: What is the combo’s rank among all tested configurations in Evolve?

A: The combo ranks 28th out of 2872 tested combos, placing it in the top 1% of all configurations tested.

Q: How much does the frame rate drop from 1080p to 4K at High settings?

A: At High settings, the average frame rate drops from 246 FPS at 1920x1080 to 94 FPS at 3840x2160, a reduction of 152 FPS (62%).

Q: Does the RTX 5090 D have enough VRAM for Evolve at 4K?

A: The GPU has 32 GB of GDDR7 memory, which is more than sufficient for Evolve’s requirements. The 4K Ultra result of 65 FPS is limited by compute performance, not memory capacity.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the best overall experience across all resolutions. At 1080p, it delivers 305 FPS, which is 30 FPS higher than High and only 30 FPS lower than Low. This represents an excellent balance of visual quality and performance for competitive play. At 1440p, Medium achieves 210 FPS, which is well above the 165 FPS of High and provides a smooth experience on high-refresh-rate monitors.

For 4K gaming, Medium is the recommended preset. It achieves 120 FPS at 3840x2160, which is 26 FPS higher than High and 34 FPS lower than Low. This 120 FPS result is smooth for most gaming scenarios and maintains better visual fidelity than Low. The minimum frame rate of 102 FPS at 4K Medium ensures that there are no significant stutters or drops below 100 FPS.

The High preset is a viable option for those prioritizing visual quality over raw frame rate. At 1440p, it delivers 165 FPS, which is still very playable, and at 4K, it achieves 94 FPS. However, the jump from Medium to High costs 45 FPS at 1080p, 45 FPS at 1440p, and 26 FPS at 4K, making it a less efficient choice for performance.

The Ultra preset is not recommended for this combo in Evolve, as it produces the lowest frame rates at every resolution. At 4K, it drops to 65 FPS, which is below the threshold for smooth gameplay on most displays. The visual improvement from High to Ultra does not justify the significant performance loss, especially at higher resolutions.

The Low preset is only recommended for players seeking maximum frame rates at 4K, as it achieves 154 FPS. However, this comes at the cost of reduced visual quality. For most users, the Medium preset provides the best compromise, delivering high frame rates with acceptable graphical fidelity. The data clearly shows that Medium is the sweet spot for this CPU-GPU combination in Evolve.