Thief

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 3060 Ti produces a clear pattern in Thief: strong 1080p performance, workable 1440p, and only moderate 4K outcomes. At 1920x1080 with High settings the system averages 111 FPS, while 2560x1440 drops to 76 FPS, and 3840x2160 falls to 45 FPS. Based on these measured rows, the RTX 3060 Ti becomes the primary constraint as resolution climbs, with the 8 GB VRAM and 448.0 GB/s bandwidth insufficient to push 4K Ultra beyond 43 FPS. The CPU, a 6-core/12-thread Zen 4 part with a boost clock of 5.00 GHz, shows no sign of stalling the frame rate; even at low settings 1080p reaches 188 FPS, far above the GPU's delivery.

Resolution Scaling

The pattern from 1080p to 4K is consistent: each step up in resolution reduces the average frame rate by a substantial margin. At High quality, the system goes from 111 FPS at 1920x1080 to 76 FPS at 2560x1440, then down to 45 FPS at 3840x2160. Low settings show a similar trajectory: 188 FPS at 1080p, 131 FPS at 1440p, and 77 FPS at 4K. Medium settings see the most complete data, with 4K at 59 FPS, 1440p at 100 FPS, and 1080p at 145 FPS. Ultra settings are the most demanding, yielding 105 FPS at 1080p, 72 FPS at 1440p, and 43 FPS at 4K.

The scaling is not linear; the drop from 1080p to 1440p is roughly 30% at High settings (111 to 76 FPS), but the drop from 1440p to 4K is about 40% (76 to 45 FPS). This indicates that the GPU is being increasingly taxed as pixel count rises, with the memory bus and fill rate becoming limiting factors. The 4K Ultra result of 43 FPS is the lowest average in the dataset, sitting just below the 45 FPS High 4K figure. The fact that low settings at 4K produce 77 FPS shows that the engine can be tuned to reach playable rates, but the GPU’s internal resources (memory bandwidth and ROPS) are decisive.

GPU Role

The RTX 3060 Ti uses the GA104 chip on an 8 nm Samsung process, with 4864 shading units and 80 ROPs. Its core clocks are 1410 MHz base and 1665 MHz boost. The 8 GB GDDR6 memory runs on a 256-bit bus, delivering 448.0 GB/s bandwidth. In Thief, the GPU's ability to fill frames depends heavily on this bandwidth and memory size. At 4K High, the average 45 FPS reflects the heavy demand on BW, while at 4K Low the drop to 77 FPS shows that shader load can be reduced, but the memory system still holds its own.

The GPU’s average benchmark score across generic tests (PassMark G3D) is 20349, and it achieves a percentile of 59 among all GPUs. Its nearest competitors are the AMD Radeon RX 9060 (0.7% higher score), the AMD Radeon Pro 5600M (1.4% lower), and the AMD Radeon RX 5700 XT (1.4% lower). Within this game though, the RTX 3060 Ti’s performance in Higher resolutions appears handicapped by its modest VRAM size—8 GB—and the bandwidth required to feed the pixel-heavy scenes at 4K. The data shows that at Ultra settings 1080p reaches 105 FPS, indicating that the GPU’s compute capability is ample for the title; the frame rate collapse at 4K is a direct result of memory and rasterization constraints.

The measured FPS values across the board are enthusiast-grade for 1080p and 1440p, but the 4K numbers are just borderline. The 4K Medium result of 59 FPS sits close to the 45–43 FPS range for High/Ultra, so the GPU can handle the game if settings are moderated. At 1280x720 (not tested here) one could expect even higher rates, but the data confirms the 3060 Ti’s core strength is full HD and 1440p play.

Settings Recommendations

At 1920x1080, any setting yields fluid gameplay: Low tallies 188 FPS, Medium 145 FPS, High 111 FPS, and Ultra 105 FPS. The differences between High and Ultra are modest, so High offers a good balance of visual detail and headroom. At 2560x1440, the data shows High 76 FPS, Medium 100 FPS, Low 131 FPS, Ultra 72 FPS. A useful approach is to use Medium at 1440p—it demonstrates an average of 100 FPS with a minimum 85 FPS and maximum 115 FPS, providing stable performance. The Ultra setting at 1440p dips to 72 FPS, still playable but not as smooth as 100.

For 3840x2160, the options are limited. Low produces 77 FPS, Medium 59 FPS, High 45 FPS, and Ultra 43 FPS. If 60 FPS is the target, Medium at 4K is the only choice that reaches it. For a competitive edge, Low achieves 77 FPS, but the visual trade-off is considerable. High and Ultra are not advisable for a fluid experience. Given the measured numbers, the best experience is Medium at 1080p or 1440p, where frame rates exceed 100 FPS and preset stability is good. For those aiming at 4K, only Medium or Low are worthy.

FAQ

Q: What is the average FPS at 1920x1080 with High settings?

A: The measured average is 111 FPS.

Q: Does the RTX 3060 Ti can handle Thief at Ultra settings in today’s and playable frame rate at 3840x2160?

A: No. Ultra at 4K yields only 43 FPS, while Medium can reach 59 FPS, and Low 77 FPS.

Q: How does the Ryzen 7 7500F compare to its nearest rivals in CPU benchmarks?

A: The Ryzen 7400F averages 24964 points, with a 77th percentile ranking. It practically matches the Intel Core i7-11850H (0.1% difference), the Intel Core i7-13620H (0.2% higher), and the AMD Ryzen 5 8400F (0.2% lower).

Q: Which settings of hero give the highest frame stability in this combination?

A: The Medium preset at all resolutions shows min/max data: 4K min 50, max 67; 1440p min 85, max 115; 1080p min 123, max 167. These numbers indicate less variance compared to other presets that lack narrowing data.

Q: What is the CPU’s boost clock and that of the GPU?

A: The AMD Ryzen 5 7500F has a boost clock of 5.00 GHz, while the RTX 3060 Ti boosts to 1665 MHz.

Q: How do the CPU and GPU rank in their respective performance verticals?

A: The CPU sits at the 77th percentile of all CPUs; the GPU sits at the 59th percentile of all GPUs. In Thief, the combination achieves a rank of 1684 out of 3720 possible combinations, indicating a solid mid-to-upper tier pairing.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread desktop processor based on Zen 4 (Raphael) and manufactured on a 5 nm process. It runs at a 3.70 GHz base and a 5.00 GHz boost clock. The L3 cache is 32 MB shared, and it supports DDR5 memory with 83.2 GB/s bandwidth. Given that Thief is a stealth title from 2014, its CPU workload is largely single-threaded but also benefits from modest multi-threading. The Ryzen’s Cinebench R23 single-core score is 3218, and multi-core is 22799, which gives it a rating of 77th percentile among all CPUs. Its nearest CPU rivals, the Intel Core i7-11850H, the AMD Ryzen 5 8400F, the Intel Core i7-13620H, and the Intel Core 5 210H, all differ by ±0.4% or less in generic average scores, confirming that the 7500F is a well-balanced performer.

In the game’s measured FPS me, the CPU does not appear to be the constraining factor. At 1080p High, average 111 FPS, which is close to the GPU’s capability at that resolution. At 4K Low, the CPU could still deliver 77 FPS, indicating that the processor has ample headroom. The multi-thread benchmarks like 3DMark 16 threads (6376) and PassMark multi-thread (26825) also show no bottleneck when paired with the 3060 Ti. The CPU’s ability to feed the GPU with draw calls is evident from the highest 1080p frame rate of 188 FPS at Low settings, which is far beyond any 4K demands. Thus, Thief’s CPU threading is well contained; the 7500F is never the weakest link in this pairing.

Measured FPS Breakdown

All measured values are from the source metadata. The table below organizes the average FPS, min, and max where they were recorded. For Medium, min/max are provided; for High, Low, and Ultra, only averages are available.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|---|---|---|---|---|

| 1920x1080 | High | 111 | – | – |

| 1920x1080 | Low | 188 | – | – |

| 1920x1080 | Medium | 145 | 123 | 167 |

| 1920x1080 | Ultra | 105 | – | – |

| 2560x1440 | High | 76 | – | – |

| 2560x1440 | Low | 131 | – | – |

| 2560x1440 | Medium | 100 | 85 | 115 |

| 2560x1440 | Ultra | 72 | – | – |

| 3840x2160 | High | 45 | – | – |

| 3840x2160 | Low | 77 | – | – |

| 3840x2160 | Medium | 59 | 50 | 67 |

| 3840x2160 | Ultra | 43 | – | – |

The pattern is consistent: higher resolutions and quality presets reduce FPS monotonically. At 1080p the system is never below 105 FPS, even on Ultra. At 1440p all presets stay above 72 FPS. At 4K only Low and Medium cross the 55 FPS threshold, while High and Ultra hover in the 40s. The min values for Medium at each resolution give a sense of transient stutters: 123 at 1080 gives ample margins, 85 at 1440p is still playable, and 50 at 4K is borderline but useable. The dataset indicates this combo is a solid 1080p/1440p solution, with careful preset tuning needed for 4K.