Barony

# Barony with AMD Ryzen 5 7500F + NVIDIA GeForce RTX 3060 Ti

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 3060 Ti delivers a performance profile that is heavily skewed toward high refresh rate gaming in Barony, a roguelike title from 2015 that does not place extreme demands on modern hardware. This combo ranks 882nd out of 1702 tested combinations in this game, placing it in the upper-middle tier of the database. The CPU's 6-core, 12-thread configuration on the Zen 4 Raphael architecture provides strong single-threaded performance, while the GPU's Ampere architecture with 8 GB of GDDR6 memory handles the rendering load. The data shows that this pairing is capable of exceeding 350 FPS at 1080p on Low settings, indicating that the GPU becomes the limiting factor only at higher resolutions and more demanding quality presets.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture with a 5 nm process node. It operates with a base clock of 3.70 GHz and a boost clock of 5.00 GHz, supported by 32 MB of shared L3 cache. The CPU's percentile ranking against all processors is 82, and its average benchmark score of 24993 places it in a tight cluster with rivals: it trails the AMD Ryzen 7 2700X by 0.3% and the AMD Ryzen 5 8400F by 0.3%, while leading the Intel Core i7-11850H by 0.1% and the AMD Ryzen 9 6900HX by 0.4%. These deltaPct values are minuscule, indicating that the 7500F delivers performance statistically indistinguishable from these alternatives in general compute workloads.

For Barony, the CPU's role is less about raw multi-threaded throughput and more about consistent frame pacing. The game's roguelike nature typically involves procedural generation and simulation logic that benefits from strong single-core performance. The 7500F scores 3218 in Cinebench R23 single-core and 974 in 3DMark single-thread, reflecting its high clock capability. In multi-threaded tests, the CPU achieves 22799 in Cinebench R23 multicore and 6379 in 3DMark max threads, showing that its 12 threads can handle background tasks without bottlenecking the GPU. The 65 W TDP and DDR5 memory support with 83.2 GB/s bandwidth ensure that memory latency does not become a constraint in frame generation.

Benchmark results indicate that the CPU is not the primary limiter at lower resolutions. At 1080p Low settings, the system reaches 354.5 FPS, which is a figure that suggests the CPU can feed frames far beyond typical display refresh rates. However, the data also shows that the CPU's performance ceiling in this game is not tested until the GPU is fully utilized, which occurs at higher settings and resolutions. The 7500F's nearest rival in average benchmark score, the Intel Core i7-11850H at 24974, would likely exhibit similar behavior in Barony, but the desktop 7500F's higher boost clock gives it a slight edge in frame time consistency.

FAQ

Q: How does the Ryzen 5 7500F compare to its closest CPU rivals in overall benchmark performance?

A: The 7500F's average benchmark score of 24993 is 0.1% ahead of the Intel Core i7-11850H (24974) and 0.4% ahead of the AMD Ryzen 9 6900HX (24897). It trails the AMD Ryzen 7 2700X (25057) and AMD Ryzen 5 8400F (25064) by 0.3% each. These differences are within noise, making the 7500F effectively equal to all four rivals.

Q: What is the GPU's percentile ranking and average benchmark score?

A: The RTX 3060 Ti has a percentile ranking of 69 against all GPUs and an average benchmark score of 25120. Its nearest rival, the AMD Radeon RX 6700M, scores 25180, which is 0.2% higher, while the AMD Radeon RX 6600 (25235) and AMD Radeon 890M (25246) are 0.5% higher. The AMD Radeon RX 580 2048SP is 0.7% higher at 25287.

Q: Is the RTX 3060 Ti's 8 GB memory capacity sufficient for Barony at 4K?

A: The measured FPS data shows that at 3840x2160 with Ultra settings, the combo achieves 51.8 FPS, while High settings yield 78.1 FPS. These figures suggest that memory capacity is not a limiting factor at this resolution, as the game runs at playable frame rates even at the highest quality preset.

Q: How does the combo's ranking of 882 out of 1702 reflect its gaming performance?

A: The rank places this pairing in the 48th percentile of tested combos, meaning roughly half of all tested combinations outperform it. This is consistent with the mid-range positioning of the CPU and GPU, where higher-end pairings would achieve better frame rates, but this combo still delivers playable performance in most scenarios.

Q: What is the maximum average FPS achievable with this combo in Barony?

A: The highest measured average FPS is 354.5 at 1920x1080 with Low settings. At the same resolution with Ultra settings, the average drops to 161.5 FPS, indicating that the GPU becomes the bottleneck as visual quality increases.

Q: Does the CPU's launch MSRP of $179 indicate its performance tier?

A: The launch MSRP of $179 positions the Ryzen 5 7500F as an entry-level to mid-range desktop processor. Its benchmark scores, such as 22799 in Cinebench R23 multicore and 3218 in single-core, are competitive with higher-priced rivals, but the MSRP itself does not directly correlate with in-game performance.

Resolution Scaling

The measured FPS data reveals a clear pattern of resolution scaling that shifts the bottleneck between CPU and GPU. At 1920x1080 with Low settings, the combo achieves 354.5 FPS, which indicates that the CPU is capable of delivering extremely high frame rates when the GPU load is minimal. Moving to 2560x1440 at Low settings, the average drops to 225.6 FPS, a reduction of 36.4% from the 1080p figure. At 3840x2160 with Low settings, the average is 117.5 FPS, representing a 66.9% drop from 1080p. This scaling shows that the GPU is increasingly becoming the limiting factor as resolution rises, even at the lowest quality preset.

When examining High settings, the pattern continues but with a different magnitude. At 1080p High, the average is 225 FPS, which drops to 142.8 FPS at 1440p (a 36.5% reduction) and then to 78.1 FPS at 4K (a 65.3% reduction from 1080p). The consistency of these percentage drops across Low and High settings indicates that the GPU's fill rate and memory bandwidth are the primary constraints as resolution increases. The RTX 3060 Ti's 448.0 GB/s memory bandwidth and 133.2 GPixel/s pixel rate are being taxed more heavily at higher resolutions, regardless of the quality preset.

At Medium settings, the scaling from 1080p (264 FPS) to 1440p (163.8 FPS) represents a 37.9% drop, and to 4K (85.3 FPS) a 67.7% drop. Ultra settings show the most pronounced scaling: 161.5 FPS at 1080p drops to 101.2 FPS at 1440p (37.3% lower) and to 51.8 FPS at 4K (67.9% lower). The fact that the percentage drop from 1080p to 4K remains around 66-68% across all settings suggests that resolution is the dominant factor, and the CPU's performance headroom is sufficient to avoid becoming a secondary bottleneck even at 4K Ultra.

The data indicates that at 1080p, the CPU is the limiting component, as evidenced by the 354.5 FPS ceiling on Low settings. At 4K, the GPU is clearly the limiting component, with frame rates dropping to 51.8 FPS on Ultra. The crossover point appears to occur somewhere between 1440p and 4K, where the GPU's workload becomes heavy enough to overshadow the CPU's frame generation capability.

How This Combo Ranks

The combo's rank of 882 out of 1702 tested combinations places it just above the median of all tested hardware pairings in Barony. This ranking reflects a balanced configuration where neither component is severely mismatched for the game's requirements. The CPU's 82nd percentile ranking against all processors and the GPU's 69th percentile ranking against all GPUs suggest that the CPU is relatively stronger than the GPU in isolation, but the game's frame rates indicate that the GPU is the limiting factor at higher settings.

Relative to other combos in the database, this pairing achieves frame rates that are competitive with systems using similar mid-range components. The 882nd rank out of 1702 means that 820 combos perform better, likely featuring higher-end GPUs or CPUs with more cores. However, the measured FPS data shows that this combo exceeds 60 FPS at 4K on High settings (78.1 FPS) and approaches 60 FPS at 4K Ultra (51.8 FPS), which are respectable figures for a mid-range configuration. At 1440p, the combo comfortably exceeds 100 FPS on all settings except Ultra, where it still achieves 101.2 FPS. The 1080p performance is exceptional, with all settings above 160 FPS.

The ranking also accounts for the fact that Barony is not a graphically demanding title, meaning that even lower-tier GPUs can achieve high frame rates. This explains why the combo's rank is not higher despite the RTX 3060 Ti's solid benchmark scores. The CPU's strong single-threaded performance is likely a contributing factor to the high frame rates at 1080p, but the overall rank reflects the GPU's limitations at higher resolutions. The data suggests that users seeking higher rankings would need to pair the CPU with a more powerful GPU or reduce resolution to maximize frame rates.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings produce an average of 354.5 FPS, which is the maximum measured in this dataset. Medium settings reduce the average to 264 FPS, a 25.5% decrease from Low. High settings yield 225 FPS, which is 36.5% lower than Low. Ultra settings produce 161.5 FPS, representing a 54.4% reduction from Low. The progression from Low to Ultra shows a consistent decline, with the largest single step occurring between Medium and High (39 FPS difference) and between High and Ultra (63.5 FPS difference).

At 2560x1440, the frame rates remain high but show a clear drop from 1080p. Low settings average 225.6 FPS, which is 36.4% lower than the 1080p Low figure. Medium settings average 163.8 FPS, a 27.4% reduction from 1080p Medium. High settings average 142.8 FPS, a 36.5% reduction from 1080p High. Ultra settings average 101.2 FPS, a 37.3% reduction from 1080p Ultra. The percentage drops are relatively uniform across settings, ranging from 27.4% to 37.3%, indicating that resolution scaling affects all quality presets similarly.

At 3840x2160, the frame rates drop further, with the GPU becoming the clear bottleneck. Low settings average 117.5 FPS, which is 66.9% lower than 1080p Low and 47.9% lower than 1440p Low. Medium settings average 85.3 FPS, a 67.7% reduction from 1080p Medium and a 47.9% reduction from 1440p Medium. High settings average 78.1 FPS, a 65.3% reduction from 1080p High and a 45.3% reduction from 1440p High. Ultra settings average 51.8 FPS, a 67.9% reduction from 1080p Ultra and a 48.8% reduction from 1440p Ultra.

The data shows that the transition from 1440p to 4K has a more severe impact on frame rates than the transition from 1080p to 1440p. For example, at Low settings, the drop from 1440p to 4K is 108.1 FPS, while the drop from 1080p to 1440p is 128.9 FPS. However, the percentage drop from 1440p to 4K is approximately 48% across all settings, while the percentage drop from 1080p to 1440p is approximately 27-37%. This indicates that the GPU's rendering capability scales non-linearly with resolution, with the 4K workload exceeding the RTX 3060 Ti's comfortable operating range on Ultra settings.