Thief

Thief

AVERAGE FPS
85
good

This combination provides smooth gameplay with an average of 85 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 65 65 76 83
1440p QHD 77 80 91 99
1080p Full HD 86 93 97 112

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 83
3840x2160 Medium 76
3840x2160 High 65
3840x2160 Ultra 65
2560x1440 Low 99
2560x1440 Medium 91
2560x1440 High 80
2560x1440 Ultra 77
1920x1080 Low 112
1920x1080 Medium 97
1920x1080 High 93
1920x1080 Ultra 86

Thief with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 4070 Ti SUPER delivers a smooth 1080p experience in Thief, but the data reveals a significant bottleneck that becomes more apparent as resolution climbs. The combo ranks 986th out of 1642 tested configurations, placing it in the lower-middle tier, which is a direct consequence of the aging six-core processor struggling to feed the modern GPU. While the RTX 4070 Ti SUPER is capable of high frame rates, the Ryzen 5 2600's single-thread performance limits overall output, especially at lower resolutions where the CPU's workload is relatively heavier.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen+ architecture, running on the AM4 socket. Its base clock is 3.40 GHz with a boost clock of 3.90 GHz, and it has 16 MB of shared L3 cache. These specifications place it as a solid mid-range CPU from the 2000 series, but its age is evident in its benchmark scores; its Cinebench R23 single-core score is 1579, and its multi-core score is 11186. The data shows that in Thief, a title from 2014, these CPU metrics are the primary limiting factor for the tested combo.

The game's engine appears to be highly sensitive to single-thread performance. At 1080p with Low settings, the combo achieves 112.3 FPS, but this is only 20% higher than the 4K Low result of 82.5 FPS. This modest gain from a massive resolution drop indicates that the CPU, not the GPU, is capping performance. The Ryzen 5 2600's single-thread score of 2239 in Passmark's single-thread test is modest by modern standards, and it is this metric that likely holds back the system. In contrast, the GPU has ample headroom, as evidenced by its high compute scores. The processor's 12 threads are more than the game can use, but its per-core speed is insufficient to fully drive the RTX 4070 Ti SUPER at high frame rates.

FAQ

*Q: Is the AMD Ryzen 5 2600 a bottleneck for the RTX 4070 Ti SUPER in Thief?*

A: Yes, the data strongly suggests a CPU bottleneck. At 1080p Low, the system produces 112.3 FPS, while at 4K Low it produces 82.5 FPS. The relatively small performance drop when increasing resolution by 4x indicates that the CPU is the limiting factor, as a GPU-bound scenario would show a much steeper decline.

Q: How does this combo rank compared to other tested systems?

A: The combo ranks 986th out of 1642 total tested combinations. This places it in the 60th percentile, meaning roughly 40% of tested combos perform worse, but it is far from the top. This ranking reflects the mismatch between the older CPU and the high-end GPU.

*Q: What is the best resolution for this combo in Thief?*

A: For the highest frame rates, 1920x1080 is the best choice, with all settings producing playable results. For a balanced experience, 2560x1440 at High settings delivers 80 FPS, which is a good compromise between visual quality and smoothness.

Q: How does the CPU's multi-threaded performance compare to its rivals?

A: The Ryzen 5 2600's average benchmark score is 19616. It is 0.6% ahead of the AMD Ryzen 5 7530U (19508) and 0.7% ahead of the Intel Core i7-10700F (19485). It is 0.4% behind the Intel Core i5-1345U (19691) and 0.6% behind the Intel Core i5-11600KF (19740). These are near-identical performance levels.

*Q: Is the GPU's memory capacity relevant for Thief?*

A: The RTX 4070 Ti SUPER has 16 GB of GDDR6X memory with a 256-bit bus and 672.3 GB/s of bandwidth. While Thief is an older title that likely doesn't require this much VRAM, the high bandwidth ensures that the GPU is not memory-starved, which is important for maintaining consistent frame times.

Q: What settings provide the highest frame rate?

A: The highest measured frame rate is 112.3 FPS, achieved at 1920x1080 with Low settings. This is the only setting combination that breaks the 110 FPS barrier, indicating that the CPU's limitations are most evident at the lowest graphical presets.

Resolution Scaling

The measured FPS data shows a clear pattern of diminishing returns as resolution decreases, with the CPU becoming the primary constraint. From 4K to 1080p, the average FPS across all settings increases by roughly 30-40%, which is far less than the 4x increase in pixel count. This indicates that the system is not GPU-bound at lower resolutions.

At 4K Ultra, the combo scores 65.3 FPS, while at 1080p Ultra it scores 85.5 FPS. This is only a 31% improvement. The RTX 4070 Ti SUPER has the raw power to push far more frames at 1080p, but the Ryzen 5 2600 cannot keep up. The data shows that the gap between 1440p and 1080p is smaller than the gap between 4K and 1440p, further confirming that the CPU is the limiting component. A GPU-bound system would show a much more significant jump from 1440p to 1080p, as the load shifts from the GPU to the CPU.

How This Combo Ranks

The combo's rank of 986 out of 1642 tested combinations is a clear indicator of its performance class. This position suggests that the pairing is not optimized for Thief. The GPU is a top-tier part, ranking in the 86th percentile of all GPUs, while the CPU is in the 77th percentile. The combined rank, however, is lower than either component's individual percentile, highlighting the negative impact of the CPU bottleneck.

The data shows that this is a case of a high-end GPU being held back by a mid-range CPU from 2018. The RTX 4070 Ti SUPER's performance is effectively capped by the Ryzen 5 2600's processing power, preventing the combo from achieving the frame rates that the GPU alone is capable of. This rank is a cautionary tale about pairing older CPUs with newer, more powerful GPUs for CPU-intensive titles.

Settings Recommendations

Based on the measured FPS data, the best experience is achieved at 2560x1440 with High settings, which delivers 80 FPS. This resolution provides a significant visual upgrade over 1080p while maintaining a frame rate that is well above the 60 FPS threshold for smooth gameplay. At 1080p, High settings also offer a solid experience at 93 FPS, but the jump to 1440p is worth the slight frame rate cost.

For players prioritizing maximum smoothness, 1080p Low yields the highest frame rate at 112.3 FPS, but this comes at a significant visual compromise. The Ultra preset at 1440p (77.1 FPS) is also viable, but the High preset offers a better balance of visual quality and performance. At 4K, the Ultra preset (65.3 FPS) is playable, but the High preset (65.4 FPS) is nearly identical, suggesting that the CPU bottleneck negates any visual benefits of the higher preset. The Low preset at 4K (82.5 FPS) is the best option for high refresh rate 4K displays.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values are as follows: Low settings yield 112.3 FPS, Medium yields 96.5 FPS, High yields 93 FPS, and Ultra yields 85.5 FPS. The spread from Low to Ultra is 26.8 FPS, showing that the CPU limits the impact of graphical settings.

At 2560x1440, the results are: Low at 98.8 FPS, Medium at 90.6 FPS, High at 80 FPS, and Ultra at 77.1 FPS. The drop from 1080p to 1440p is roughly 10-15% across all settings, which is modest. At 3840x2160, the results are: Low at 82.5 FPS, Medium at 75.8 FPS, High at 65.4 FPS, and Ultra at 65.3 FPS. The 4K results show a very narrow gap between High and Ultra, reinforcing the idea that the CPU is the performance ceiling.

GPU Role

The NVIDIA GeForce RTX 4070 Ti SUPER is a high-end graphics card based on the Ada Lovelace architecture, built on a 5 nm process at TSMC. It features 8448 shading units, 264 TMUs, and 96 ROPs, with a base clock of 2340 MHz and a boost clock of 2610 MHz. The card has 16 GB of GDDR6X memory on a 256-bit bus, providing 672.3 GB/s of bandwidth. Its compute capabilities are substantial, with an FP32 performance of 44.10 TFLOPS and a Passmark G3D score of 31811.

In Thief, the GPU's role is to render the scenes, but the data shows it is not the limiting factor. The GPU's high memory bandwidth and large VRAM pool are sufficient for the game's requirements. The fact that the 4K Ultra (65.3 FPS) and 4K High (65.4 FPS) results are nearly identical indicates that the GPU is not struggling with the graphical load at these settings; it is waiting for the CPU to provide draw calls. The GPU's performance percentile of 86% is far above the combo's overall rank, confirming that the graphics card is performing as expected, but is underutilized due to the CPU bottleneck.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4070 Ti SUPER

VRAM 16 GB GDDR6X
Base Clock —
Boost Clock 2610 MHz MHz
TDP 285 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4070 Ti SUPER in Thief

Resolution Settings Avg FPS
3840x2160 Low 82.5
3840x2160 Medium 75.8
3840x2160 High 65.4
3840x2160 Ultra 65.3
2560x1440 Low 98.8
2560x1440 Medium 90.6
2560x1440 High 80.0
2560x1440 Ultra 77.1
1920x1080 Low 112.3
1920x1080 Medium 96.5
1920x1080 High 93.0
1920x1080 Ultra 85.5

Thief with Ryzen 5 2600 + Other GPUs

See how Thief performs with the same CPU but different graphics cards.

Thief with RTX 4070 Ti SUPER + Other CPUs

See how Thief performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RTX 4070 Ti SUPER

Explore FPS benchmarks for other games using this same hardware combination.