Fivem

Fivem, a multiplayer modification for Grand Theft Auto V, presents a unique performance profile when paired with the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 Ti SUPER. The data shows a system where the CPU and GPU have distinct roles depending on the workload, with the final frame rates being a product of both components' capabilities. This analysis breaks down the measured FPS to understand the balance of power and the bottlenecks that define this combination.

Resolution Scaling

The performance scaling across resolutions reveals a system that is heavily CPU-bound at lower settings and increasingly GPU-bound as resolution and graphical detail increase. At 1920x1080 with Low settings, the RTX 4070 Ti SUPER achieves an average of 198.3 FPS. This drops to 167.6 FPS at High settings, a reduction of approximately 15.4%, indicating that even at 1080p, the graphical load is beginning to affect the GPU. However, the most telling data point is the jump to 2560x1440 Low, which yields 172.6 FPS. This is only a 13% decrease from the 1080p Low result, suggesting that the CPU is the limiting factor at these lower resolutions, as the GPU has ample headroom to render more pixels without a proportional drop in frame rate.

The bottleneck shifts more decisively to the GPU at 4K. At 3840x2160 Low, the average FPS is 111.5, a significant 35.4% drop from the 1440p Low result. This steep decline indicates that the GPU is now the primary constraint, struggling to fill the 8.3 million pixels of a 4K display. The trend continues with increasing settings: 4K Medium produces 90.6 FPS, and 4K High produces 70 FPS, showing a predictable scaling curve as the GPU's shading units and memory bandwidth are taxed. The Ultra setting at 4K yields 54.5 FPS, which is the lowest result in the entire dataset, highlighting the extreme demand of 4K Ultra on the RTX 4070 Ti SUPER.

The data clearly shows a dual-bottleneck scenario. At 1080p and 1440p with Low settings, the Ryzen 5 2600's six cores and twelve threads are likely the limiting factor, preventing the GPU from reaching its full potential. As resolution increases to 4K, the GPU's raw processing power becomes the limiting component, and the frame rate scales more directly with the number of pixels being rendered. The Ryzen 5 2600's architecture, based on Zen, shows its age here, as it cannot feed the RTX 4070 Ti SUPER enough frames at lower resolutions to saturate its capabilities.

FAQ

Q: What is the best resolution for this combo to maintain a high refresh rate?

A: Based on the data, 2560x1440 with Low settings achieves 172.6 FPS, which is suitable for high-refresh-rate monitors. The 1920x1080 Low setting provides even higher performance at 198.3 FPS, but the 1440p result offers a better balance of image clarity and speed.

Q: How does the system perform at 4K Ultra settings?

A: The measured average FPS at 3840x2160 Ultra is 54.5 FPS. This is the most demanding configuration tested and is below the 60 FPS threshold that many consider the baseline for smooth gameplay, indicating the GPU is heavily taxed.

Q: Is the CPU or GPU more of a bottleneck at 1080p?

A: The performance difference between 1080p Low (198.3 FPS) and 1440p Low (172.6 FPS) is only 25.7 FPS, suggesting that the CPU is the primary bottleneck. The GPU appears to have enough headroom to handle the additional pixels without a large performance penalty.

Q: How does this combo rank among other tested configurations?

A: This specific pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 Ti SUPER ranks 414th out of 1792 tested combos for Fivem, placing it in the top 23% of all systems tested.

Q: What is the difference in performance between Low and Ultra settings at 1440p?

A: At 2560x1440, the average FPS drops from 172.6 on Low to 101.1 on Ultra, a decrease of 71.5 FPS. This shows a substantial performance cost for the higher graphical fidelity and effects.

Q: Is the Ryzen 5 2600 holding back the RTX 4070 Ti SUPER?

A: The data suggests yes, particularly at lower resolutions. The relatively small performance drop from 1080p to 1440p at Low settings indicates a CPU limit, preventing the GPU from fully scaling its performance. The CPU's benchmark percentile of 77 out of 100 highlights its mid-range standing.

GPU Role

The NVIDIA GeForce RTX 4070 Ti SUPER is a high-end graphics card, and its performance in Fivem is substantial. The GPU's specifications include 16 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 672.3 GB/s. This memory configuration is more than sufficient for Fivem's needs, even at 4K resolution where high-resolution textures demand significant memory capacity. The card's boost clock of 2610 MHz, based on the Ada Lovelace architecture, provides the raw compute power necessary to drive high frame rates.

The GPU's role is most evident at 4K resolution. The scaling from Low (111.5 FPS) to Ultra (54.5 FPS) shows a performance cliff that is characteristic of a GPU-bound scenario. The shading units and texture mapping units are saturated as settings increase, leading to a direct correlation between graphical fidelity and frame rate. The GPU's 96 ROPs are responsible for the final pixel output, and at 4K, they are working at their limit, as evidenced by the significant frame rate drops. The data shows that the RTX 4070 Ti SUPER is a capable 4K card in this game, but only at lower settings, as Ultra presents a challenge that pushes it below the 60 FPS mark.

At 1080p and 1440p, the GPU's performance is artificially capped by the CPU. The card is capable of much higher frame rates, as indicated by the 198.3 FPS at 1080p Low, but the Ryzen 5 2600 cannot prepare frames fast enough to keep the GPU fully occupied. This is a classic case of a powerful GPU being underutilized by an older, mid-range CPU. The GPU's passmark G3D score of 31811 and its 86th percentile ranking versus all GPUs confirm its high-end status, which is not fully realized in this pairing at lower resolutions.

How This Combo Ranks

In the grand scheme of tested hardware, the combination of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 Ti SUPER holds a rank of 414 out of 1792 combos for Fivem. This places the system in the upper quartile of all tested configurations, indicating that it is a strong performer overall. The high rank is primarily driven by the GPU's immense power, which can overcome the CPU's limitations, especially at higher resolutions where the processor has less of an impact.

The ranking position is a direct result of the imbalance between the two components. While the GPU is a top-tier part, the CPU is a second-generation Ryzen part from 2018. The CPU's average benchmark score is 19616, which puts it in the 77th percentile of all CPUs. However, its nearest rivals, such as the Intel Core i5-11600KF with an average score of 19740, are newer and have higher single-thread performance, which is crucial for gaming. The data shows that the combo's rank is lower than what the GPU alone would achieve, as the CPU holds the system back from reaching the top echelons of the leaderboard.

The rank of 414th out of 1792 represents a competitive position. It signifies that this system will outperform the majority of machines tested, but it also leaves room for improvement. If the CPU were upgraded to a more modern part, the combo's rank would likely increase significantly, as the RTX 4070 Ti SUPER would be able to unlock its full potential. The data underscores that the CPU is the weakest link in this pairing, and its age is reflected in the overall ranking.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen+ architecture. With a base clock of 3.40 GHz and a boost clock of 3.90 GHz, it provides a solid foundation for gaming. However, Fivem, being a multiplayer mod with a heavy CPU load, exposes the limitations of this older architecture. The CPU's benchmark results show a single-thread score of 2239 in PassMark, which is a key indicator of gaming performance, but it is relatively low compared to modern CPUs.

The CPU's role in this combo is most apparent at 1080p and 1440p with lower settings. The data shows that at 1080p Low, the system achieves 198.3 FPS, but at 1440p Low, it still manages 172.6 FPS. This small difference suggests that the CPU is the limiting factor, as the GPU is not being fully utilized. The CPU is likely bottlenecking the frame generation process, unable to keep up with the game's simulation and draw call logic. This is a common issue with older CPUs in CPU-intensive games.

The CPU's performance in Fivem is also reflected in its benchmark scores. Its Cinebench R23 multi-core score of 11186 and single-core score of 1579 are respectable but not exceptional. The processor's 12 threads help with multi-threaded workloads, but Fivem's performance often relies on single-thread speed. The data indicates that the Ryzen 5 2600, while capable of providing playable frame rates, is the primary bottleneck in this system. Its 77th percentile ranking versus all CPUs shows it is a mid-range part, and its age is a significant factor in limiting the RTX 4070 Ti SUPER's performance at lower resolutions.

Measured FPS Breakdown

The measured FPS data provides a comprehensive look at this combo's performance across all settings and resolutions.

At 1920x1080, the system delivers high frame rates across the board. The Low setting yields the highest average at 198.3 FPS. Medium settings produce 183.4 FPS, while High settings drop to 167.6 FPS. The Ultra setting is the most demanding at this resolution, yet it still achieves a solid 148.2 FPS. This data shows that for 1080p gaming, the system is overqualified, and the CPU is the limiting factor, preventing the GPU from pushing even higher numbers.

Moving to 2560x1440, the performance remains impressive. Low settings average 172.6 FPS, which is a minor drop from 1080p. Medium settings yield 158.4 FPS, and High settings produce 127.4 FPS. The Ultra setting at this resolution averages 101.1 FPS, which is above the 100 FPS mark and provides a smooth experience for most users. The scaling from Low to Ultra at 1440p shows a 71.5 FPS drop, which is a significant performance cost for the higher graphical fidelity.

At 3840x2160, the GPU's workload becomes the dominant factor. Low settings average 111.5 FPS, which is still a playable frame rate. Medium settings drop to 90.6 FPS, and High settings fall to 70 FPS. The Ultra setting at this resolution is the only configuration tested that falls below the 60 FPS threshold, averaging just 54.5 FPS. This makes 4K Ultra a challenging target for this combination, requiring settings adjustments to maintain a smooth frame rate. The data shows a clear progression: the system is excellent for 1080p and 1440p gaming, but struggles with the most demanding 4K settings.