The Technomancer

```markdown

The pairing of the AMD Ryzen 7 5700X3D with the NVIDIA GeForce RTX 5070 Ti delivers consistently high frame rates in The Technomancer, a 2016 Action RPG that rewards both high refresh rate monitors and 4K displays. The measured data shows a composition that handles the game's engines at 1080p and 1440p comfortably, while preserving respectably at 4K even under Ultra presets.

Resolution Scaling

Scaling from 1080p to 4K is a classic test of engine efficiency and hardware headroom. At High settings, the average frame rate drops from 184 FPS at 1920x1080 to 120 FPS at 2560x1440, and then to 66 FPS at 3840x2160. That is a 70 FPS drop when moving from 1080p to 1440p, and a further 54 FPS drop when jumping to 4K. The same pattern holds for the other presets: Low goes from 214 to 183 to 101; Medium from 194 to 141 to 77; and Ultra from 144 to 94 to 52. The 4K numbers are the lowest, falling to 52 FPS on Ultra—a level that requires lowering settings to lock a 60 FPS experience.

A more telling observation comes from comparing the drop amplitudes. For High settings, the loss from 1440p to 4K is 54 FPS, which is smaller than the 70 FPS loss from 1080p to 1440p. For Low settings the opposite holds: the drop from 1440p to 4K is 82 FPS (183 to 101), larger than the 31 FPS drop from 1080p to 1440p. This suggests that at low graphics presets, the CPU still has a role in feeding the GPU at lower resolutions, but at 4K the GPU becomes the limiting component regardless of preset. The data confirms that at 4K the system is heavily GPU-bound; at 1080p and 1440p the gap between settings is broader, meaning the CPU can push higher frame counts.

The measured minimum and maximum values (provided only for the Medium preset) reinforce this: at 1080p Medium, the minimum is 165 FPS and maximum 223 FPS; at 1440p Medium, min 120, max 162; at 4K Medium, min 66, max 89. Even the lowest recorded Minimum on Medium at 4K is 66 FPS, a fully playable level. This tells us that the frame times are relatively stable across the board, with more variation at lower resolutions where the CPU can deliver faster frames.

GPU Role

The RTX 5070 Ti is the heart of the 4K performance here. It packs a 109 GB/s memory bandwidth from its 16 GB of GDDR7 on a 256-bit bus, and its boost clock reaches 2452 MHz. These specifications translate into a Samsung HBM2e-like data flow (896.0 GB/s) that the game uses heavily at high resolution. The GPU's 78% percentile among all tested cards confirms its overall high-end position, with an average benchmark score of 49957. Its direct competition at this score includes the AMD Radeon RX Vega 64 (average score 50001, a –0.1% delta) and the Intel Arc A550M (av 49773, a +0.4% delta). These are near-identical results, placing the 5070 Ti squarely in the top tier of GPU performance.

Within The Technomancer, the 16 GB VRAM is far beyond what the game needs; the highest preset at 4K uses only 52 FPS on Ultra, and the 16 GB capacity ensures textures and render data never spill into system memory. The high memory bandwidth is also beneficial—while the game was built in a modern era, the fast GDDR7 helps deliver the observed 4K frame rates. The GPU's clock speeds, with a base of 2295 MHz, are also high enough to sustain the heavy pixel work, and the measured performance at 4K Medium (77 FPS) matches the trend of a card that is not bottlenecked.

The RTX 5070 Ti's G3D score is 32974 and its Pass G3D rating 32974? Actually we use exactly given: "passmark_g3d": 32974. We can state that. But we must not overload. The GPU section can mention one or two of these stats.

CPU Role

The AMD Ryzen 7 5700X3D is a 8-core, 16-thread processor based on Zen 3 (Vermeer). It operates at a 3.00 GHz base and 4.10 GHz boost, with a 96 MB shared L3 cache. In CPU-oriented benchmarks, it scores 22366 multi-core in Cinebench R23 and 3157 single-core, with a Geekbench multi-core score of 11086. Its average benchmark score is 24709

, and it ranks in the 77thpercentile of all tested processors. The nearest rivals are all within 0.6% of it: the Ryzen 5 7600X3D (avg 24728, –0.1%), the Ryzen 9 5900HX (24822, –0.5%), the Intel Core i5-12450HX (24576, +0.5%), and the Intel Core i5-11600 (24563, +0.6%). This positions the 5700X3D as a mid-to-high-range CPU that can be expected to keeps frame rates high when the GPU is not the limit.

In The Technomancer, the CPU is rarely the limiting factor until you drop to Very Low settings. At 1080p Low, the average frame rate is 214 FPS, and even at 1080p Ultra it stays at 144 FPS. At 4K Low, the CPU still allows 101 FPS, meaning the GPU is doing the heavy lifting. The thread count and high single-thread performance (Cinebench R23 single-core 3157) ensure the game, which was released in 2016 and likely uses a few cores, is effectively fulfilled. The 96 MB L3 cache helps with data reuse, but on an old title, the impact is lower than in recent simulators. Overall, the CPU provides a solid base for the frame rates measured, but it does not turn the huge into a regretful pairing at any resolution.

Measured FPS Breakdown

The following table shows the average frame rates for every resolution and settings combination tested. Two data points for the “Medium” preset are included because those measurements also came with minimum and maximum values.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|---------|--------|--------|--------|

| 1920x1080 | Low | 214 | - | - |

| 1920x1080 | Medium | 194 | 165 | 223 |

| 1920x1080 | High | 184 | - | - |

| 1920x1080 | Ultra | 144 | - | - |

| 2560x1440 | Low | 183 | - | - |

| 2560x1440 | Medium | 141 | 120 | 162 |

| 2560x1440 | High | 120 | - | - |

| 2560x1440 | Ultra | 94 | - | - |

| 3840x2160 | Low | 101 | - | - |

| 3840x2160 | Medium | 77 | 66 | 89 |

| 3840x2160 | High | 66 | - | - |

| 3840x2160 | Ultra | 52 | - | - |

At 1080p, every preset alias at least 144 average FPS, meaning even a 144 Hz monitor can be fully utilized on Ultra. At 1440p, Ultra delivers 94 FPS, which still exceeds the 60 FPS threshold but may not fully saturate 144 Hz. At 4K, only the Medium preset maintains a minimum above 60 (66), while High (66 FPS) and Ultra (52 FPS) fall below.

FAQ

Q: What is the highest average frame rate recorded in this test?

A: The highest average is 214 FPS, obtained at 1920x1080 resolution with Low settings.

Q: Does the 4K Ultra preset achieve an average of 60 FPS?

A: No; the 4K Ultra preset averages 52 FPS, which is below the 60 FPS threshold.

Q: How much VRAM does the GPU have?

A: The RTX 5070 Ti has 16 GB of GDDR7 memory.

Q: What is the boost clock speed of the Ryzen 7 5700X3D?

A: The CPU has a boost clock of 4.10 GHz.

Q: Which resolution preset combination shows a minimum FPS of 66 at 4K?

A: The 4K Medium preset has a minimum FPS of 66.

Q: What is the CPU’s percentile ranking among all tested processors?

A: It ranks in the 77th percentile of all CPUs.

Settings Recommendations

The measured data gives a clear ordering for the best experience per performance. At 1080p, the Medium preset (194 FPS) and High (184 FPS) provide the high frame rates, but Ultra still produces 144 FPS-, enough for 144 Hz gaming without Freesync. If the goal is to maximize texture quality while maintaining a buttery smooth experience, Ultra at 1080p is a viable choice. At 1440p, both High (120 FPS) and Medium (141 FPS) are smooth, with Medium having a hard floor of 120 FPS. At 4K, the Medium preset is the sweet spot: it averages 77 FPS with a 66 FPS not second than 66. High does 66 FPS, but that is exactly at the limit, and the min is not reported. Ultra sits at 52 FPS and can will cause visible stutter on typical 60Hz displays.

For a wall experience, the Medium preset at 4K is the only one that guarantees a minimum above 60 FPS. For higher refresh monitors, using the Medium preset at 1440p yields 141 FPS with a 120 FPS minimum, giving consistency. The Ultra preset anywhere is an option if the player prefers visual detail over frame alternation; at 1440p it still yields 94 FPS, and at 1080p 144 FPS, giving a compromise.

How This Combo Ranks

The data recorded for this combination (AMD Ryzen 7 5700X3D + RTX 5070 Ti) in The Technomancer yields a combo rank of # 559 in the database out of a total combos of 3696. This means that 559 such combinations perform better for this game, and there are 3137 combos that perform worse. The rank reflects the measured frame rates across all settings and resolutions. In other words, the highlight sits in the top 15% of all tested pairs, which aligns with the high-end specifications of both the CPU and the GPU. The measurement status is confirmed as “measured”, not estimated, so the rank is based on actual fingered data.

The 5700X3D and RTX 5070 Ti combination ranks in the upper part of the chart, so it is a strong pairing for The Technomancer. The processor’s 8 cores and 96 MB L3, combined with the GPU’s 16 GB VRAM and 896 GB/s bandwidth, work together without obvious bottlenecks at any settings. The only place where the pair cannot hit solid 60 frames is at 4K Ultra, which is an extreme setting for this title and expected. On the whole, this setup is among the top 600 combos that give excellent performance in this piece.