The Technomancer

The Technomancer, a 2016 Action RPG, is not a modern showcase title, but its engine still responds dramatically to hardware. This analysis examines the AMD Ryzen 5 8400F and NVIDIA GeForce RTX 5070 Ti combination using measured frame rate data. The results show a pairing that is heavily GPU-bound at higher resolutions but reveals CPU limitations at 1080p, creating a clear picture of where this combo excels and where it leaves performance on the table.

FAQ

Q: How does this combo rank among all tested configurations?

A: The AMD Ryzen 5 8400F + NVIDIA GeForce RTX 5070 Ti combination ranks 148th out of 1656 tested combos, placing it in the top 9% of all hardware pairings in the database for this game.

Q: Is the CPU holding back the GPU in this game?

A: At 1080p, yes. The data shows that dropping from Medium to Low settings only increases FPS from 222.9 to 262.7, a 17.9% gain, while at 4K the same settings change yields a 27.2% improvement. This indicates the CPU becomes a bottleneck at lower resolutions where frame rates are extremely high.

Q: What is the best 4K setting for this combo?

A: High settings at 3840x2160 produce an average of 69.6 FPS, which is the best balance of visual quality and playability at that resolution. Ultra settings drop to 52.7 FPS, while Medium offers 79.7 FPS but with reduced visual fidelity.

Q: How does the Ryzen 5 8400F compare to its nearest rival CPU?

A: The CPU's average benchmark score of 25064 is essentially tied with the AMD Ryzen 7 2700X, which scores 25057 with a deltaPct of 0. It also sits within 0.3% of the AMD Ryzen 5 7500F, showing these processors deliver nearly identical synthetic performance.

Q: Can this system handle 1440p gaming?

A: Absolutely. At 2560x1440, the combo delivers 119.4 FPS on High settings and 97.4 FPS on Ultra. Even the most demanding preset at this resolution clears 60 FPS by a wide margin, making 1440p the sweet spot for this pairing.

Q: Is the RTX 5070 Ti significantly faster than its closest rival?

A: The GPU's average benchmark score of 52086 is nearly identical to the NVIDIA GeForce RTX 4080, which scores 52085 with a deltaPct of 0. The performance difference is effectively a tie in aggregate synthetic testing.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the dominant component in this pairing. With 16 GB of GDDR7 memory and a 256-bit bus delivering 896.0 GB/s of bandwidth, the card has ample resources for The Technomancer's textures and effects. The GPU's boost clock of 2452 MHz and its 8960 shading units provide substantial raw compute power, reflected in its 87th percentile ranking among all GPUs.

The measured frame rates demonstrate the GPU's scaling behavior. At 4K, the difference between Low and Ultra settings is stark: 101.4 FPS versus 52.7 FPS. This 48.7 FPS gap shows how demanding the Ultra preset's effects are on the GPU's resources. The card's 43.94 TFLOPS of FP32 performance is being pushed hard at 4K Ultra, where it falls below the 60 FPS threshold.

At 1440p, the GPU has more headroom. Ultra settings produce 97.4 FPS, while High settings reach 119.4 FPS. The scaling from 1440p to 4K at High settings shows a 41.7% performance drop, indicating the GPU is the primary limiter as resolution increases. The 16 GB VRAM capacity is unlikely to be a constraint in this game, even at 4K Ultra, given the title's age and texture requirements.

Resolution Scaling

The performance scaling across resolutions reveals clear GPU dominance, but with an interesting caveat at 1080p. From 1440p to 4K at High settings, FPS drops from 119.4 to 69.6, a 41.7% reduction. This is consistent with a GPU-bound scenario where pixel count increases by 2.25 times.

At 1440p, the combo delivers excellent results across all settings. Low settings hit 184.2 FPS, Medium achieves 141.9 FPS, and even Ultra maintains 97.4 FPS. These numbers suggest the GPU is doing the heavy lifting, with the CPU keeping pace.

The 1080p results tell a different story. At Low settings, the system produces 262.7 FPS, but the scaling from 1440p Low (184.2 FPS) is only a 42.6% improvement. When moving from 1440p to 1080p at High settings, the gain is 56.4%. This inconsistent scaling indicates the CPU begins to limit performance at 1080p, particularly on lower settings where the GPU has spare capacity. The Ryzen 5 8400F's 6 cores and 12 threads, with a boost clock of 4.70 GHz, are sufficient for high frame rates, but they cap the system's ceiling around 260 FPS.

Measured FPS Breakdown

At 1920x1080, the combo produces its highest frame rates. Low settings average 262.7 FPS, Medium hits 222.9 FPS, High delivers 186.7 FPS, and Ultra drops to 145.8 FPS. The gap between Low and Ultra is 116.9 FPS, showing the significant impact of the Ultra preset at this resolution.

At 2560x1440, performance remains strong. Low settings average 184.2 FPS, Medium reaches 141.9 FPS, High achieves 119.4 FPS, and Ultra maintains 97.4 FPS. The step from Medium to High is a 15.9% reduction, while High to Ultra is an 18.4% drop.

At 3840x2160, the GPU faces its toughest test. Low settings average 101.4 FPS, Medium delivers 79.7 FPS, High achieves 69.6 FPS, and Ultra falls to 52.7 FPS. The drop from High to Ultra is 24.3%, the largest single-setting penalty in the dataset, indicating the Ultra preset's effects are disproportionately demanding at 4K.

The data shows a consistent pattern: each settings tier costs roughly 15-25% performance, and each resolution step costs a similar amount. This consistency points to a well-balanced system where the GPU scales predictably with workload.

How This Combo Ranks

The combo's rank of 148 out of 1656 tested configurations places it in the top 8.9% of all pairings. This is a strong result, particularly given that The Technomancer is not a modern title optimized for current hardware. The ranking reflects the raw power of the RTX 5070 Ti, which sits at the 87th percentile among all GPUs.

The CPU contributes meaningfully to this ranking. The Ryzen 5 8400F's 82nd percentile ranking among all CPUs, with an average benchmark score of 25064, ensures it does not hold the GPU back in most scenarios. Its nearest rival, the AMD Ryzen 7 2700X, scores 25057 with a deltaPct of 0, confirming the 8400F's competitive position.

However, the 1080p results suggest the combo could rank higher with a stronger CPU. The system's inability to significantly scale FPS beyond 262.7 FPS at 1080p Low indicates a CPU ceiling. In a game like The Technomancer, where the GPU can theoretically render frames much faster, the Ryzen 5 8400F's Zen 4 architecture is the limiting factor at these extreme frame rates.

Settings Recommendations

For the best experience, the data points to High settings at 2560x1440 as the optimal balance. This configuration delivers 119.4 FPS, which is well above the 60 FPS standard for smooth gameplay, while maintaining quality that exceeds Medium settings. The jump from High to Ultra at 1440p costs 22.0 FPS, which is not worth the visual gains in most cases.

At 4K, High settings are the clear recommendation. The 69.6 FPS average is playable, while Ultra drops to 52.7 FPS, introducing potential stutter on standard 60 Hz displays. Medium at 4K offers 79.7 FPS, but the visual compromise from High is noticeable in a game with this much environmental detail.

For competitive play or high refresh rate monitors, 1080p Medium is the best choice. The 222.9 FPS average exceeds the refresh rate of most 144 Hz displays, and the step to Low only gains 39.8 FPS while significantly degrading visuals. At 1080p High, the 186.7 FPS still exceeds 144 Hz, making it viable for high-refresh setups that prioritize quality.

The Ultra preset is only recommended for 1440p, where it maintains 97.4 FPS. At 4K, the 52.7 FPS average makes it unsuitable for smooth gameplay, and at 1080p, the 145.8 FPS result is strong but the visual difference over High is minimal. The data consistently shows High as the sweet spot for this combo across all resolutions.