The Technomancer
This combination provides smooth gameplay with an average of 84 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 42 | 48 | 62 |
| 1440p QHD | 56 | 72 | 86 | 114 |
| 1080p Full HD | 87 | 111 | 133 | 172 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 7 5700X3D + AMD Radeon RX 6700 XT, In-Depth Analysis
The AMD Ryzen 7 5700X3D paired with the AMD Radeon RX 6700 XT delivers a playable experience in The Technomancer, but the data reveals a system that is heavily constrained by the GPU at higher resolutions while showing strong CPU headroom at 1080p. The measured frame rates indicate that this combination ranks in the 928th position out of 1656 tested combos, placing it in the upper-middle tier of the database for this title.
Resolution Scaling
The FPS drop from 1080p to 4K is dramatic and clearly identifies the GPU as the primary limiting factor. At High settings, the average frame rate falls from 110.5 FPS at 1920x1080 to 71.6 FPS at 2560x1440, a 35% reduction, and then further to 42 FPS at 3840x2160, representing a 62% total decline from 1080p. This steep scaling curve is typical of a GPU-bound scenario—as pixel count increases, the RX 6700 XT's rendering workload grows faster than the CPU can compensate.
The pattern holds across all settings presets. At Low settings, the system achieves 171.8 FPS at 1080p, drops to 113.7 FPS at 1440p, and reaches 61.8 FPS at 4K. The fact that even Low settings cannot maintain 60 FPS at 4K suggests the GPU is saturated regardless of graphical complexity. Conversely, the relatively small gap between 1080p and 1440p results—roughly 34-35% across presets—indicates that the CPU is not the bottleneck at these resolutions; the scaling is nearly linear with pixel count, which is the signature of a GPU-limited configuration.
At 4K Ultra, the average FPS collapses to 29.6, which is less than half of the 4K High result. This indicates that the Ultra preset introduces effects that disproportionately tax the GPU's compute and memory subsystems. The resolution scaling data points to a clear conclusion: this combo is designed for 1080p and 1440p gaming, with 4K reserved for reduced settings or titles less demanding than The Technomancer.
GPU Role
The Radeon RX 6700 XT is the dominant component in this pairing for The Technomancer, and its 12 GB of GDDR6 memory on a 192-bit bus with 384.0 GB/s bandwidth proves adequate for the game's demands. The GPU's boost clock of 2581 MHz and game clock of 2424 MHz provide the raw throughput needed for the measured results, but the data shows that memory bandwidth and pixel fill rate become limiting factors at higher resolutions.
The GPU's pixel rate of 165.2 GPixel/s and texture rate of 413.0 GTexel/s are substantial, yet the 4K results—ranging from 29.6 FPS at Ultra to 61.8 FPS at Low—demonstrate that the architecture's RDNA 2.0 design, with 2560 shading units and 64 ROPs, cannot sustain high frame rates at 3840x2160 with maximum quality settings. The FP32 throughput of 13.21 TFLOPS is competitive for its class, but The Technomancer's rendering engine appears to stress the memory subsystem more than raw compute, as evidenced by the 42 FPS at 4K High versus 48.4 FPS at 4K Medium—a modest 13% improvement despite a significant drop in visual fidelity.
The GPU's benchmark percentile of 77 versus all GPUs, with an average benchmark score of 33721, places it slightly ahead of the Radeon RX 6800 (0.7% delta) and behind the Radeon HD 7950 and Radeon RX 480 (both -1% delta). This positioning suggests the RX 6700 XT is a mid-to-high tier card that excels at 1080p and 1440p, but its 12 GB frame buffer and 192-bit interface become constraints at 4K where the game's texture and geometry demands scale beyond its design sweet spot.
FAQ
Q: What is the best resolution for this CPU-GPU combo in The Technomancer?
A: The data shows 1920x1080 as the optimal resolution, with average frame rates ranging from 87.2 FPS at Ultra to 171.8 FPS at Low, while 2560x1440 remains playable with a High preset delivering 71.6 FPS.
Q: Can this system handle 4K gaming in The Technomancer?
A: At 4K, only the Low preset achieves above 60 FPS (61.8 FPS), while Medium (48.4 FPS) and High (42 FPS) fall below the 60 FPS threshold, and Ultra drops to 29.6 FPS, indicating 4K is only viable with reduced settings.
Q: How does the RX 6700 XT compare to its nearest rivals in overall GPU benchmarks?
A: The RX 6700 XT has an average benchmark score of 33721, which is 0.7% higher than the Radeon RX 6800 (33493) and 1.3% higher than the NVIDIA RTX A5000 (33294), while sitting 1% below both the Radeon HD 7950 and Radeon RX 480.
Q: Does the CPU bottleneck the GPU in this game?
A: No, the evidence points to GPU limitation. At 1080p Low, the system reaches 171.8 FPS, and the scaling from 1080p to 1440p is nearly proportional to pixel count, indicating the Ryzen 7 5700X3D has sufficient headroom.
Q: What is the FPS difference between High and Ultra settings at 1440p?
A: At 2560x1440, High delivers 71.6 FPS while Ultra drops to 56.4 FPS, a 21% performance penalty for the Ultra preset, suggesting High is the more efficient choice for maintaining smooth gameplay.
Q: How does the CPU's multi-threaded performance influence gaming results?
A: The Ryzen 7 5700X3D scores 22366 in Cinebench R23 multicore and 26318 in PassMark multithread, with an 82nd percentile ranking, indicating ample compute capacity that does not bottleneck the GPU in this title.
How This Combo Ranks
The combination of the Ryzen 7 5700X3D and RX 6700 XT ranks 928th out of 1656 tested combos in The Technomancer, placing it in the 56th percentile of all configurations. This ranking is modest for a system with a CPU that sits in the 82nd percentile versus all CPUs and a GPU in the 77th percentile, suggesting that the game's optimization or the specific pairing does not fully leverage the hardware's potential.
The CPU's nearest rivals provide context: the Intel Core i7-1360P (0.2% delta), AMD Ryzen 5 7600X3D (0.3% delta), and Intel Core i5-11600 (0.5% delta) all score similarly, with the AMD Ryzen AI Max 385 trailing by -0.6%. This tight clustering indicates the 5700X3D is not a performance outlier but rather a solid mid-range processor. The GPU's rivals—RX 6800, HD 7950, RX 480, and RTX A5000—are within a 1.3% range, further emphasizing that this combo is built from components that are competitive but not class-leading.
The measured FPS data shows that the combo's rank is dragged down by the 4K Ultra result (29.6 FPS) and the sub-60 FPS 4K High result (42 FPS), while its 1080p performance (87.2-171.8 FPS) is strong. This suggests the ranking reflects the game's demanding nature at high resolutions rather than a fundamental hardware deficiency.
CPU Role
The AMD Ryzen 7 5700X3D, with 8 cores and 16 threads based on Zen 3 architecture, plays a supporting role in this pairing. Its base clock of 3.00 GHz and boost clock of 4.10 GHz, combined with a large 96 MB shared L3 cache, provide more than enough processing power for The Technomancer's engine. The CPU's benchmarks are robust: Cinebench R23 multicore scores 22366, Geekbench multicore hits 10108, and PassMark multithread reaches 26318, with a single-thread PassMark score of 2970.
The 3DMark results reveal scaling characteristics: 2 threads score 1575, 4 threads score 3097, 8 threads score 5357, and 16 threads score 6764. This near-linear scaling from 2 to 16 threads (1575 to 6764, a 4.3x increase) indicates the CPU efficiently utilizes its cores, which is beneficial for a game that may use multiple threads for physics and AI. The 105W TDP and 7nm process node from TSMC, with 8,850 million transistors on a 74 mm² die, underscore an efficient design.
Crucially, the CPU percentile of 82 versus all CPUs means it outperforms the majority of processors in the database. Yet the measured FPS data shows that at 1080p Low (171.8 FPS) and 1080p Medium (132.6 FPS), the GPU is still the limiting factor, as the frame rates do not exceed what the RX 6700 XT can render. The CPU's role is to ensure consistent frame delivery without stuttering, and the data indicates it succeeds, as there are no anomalies in the FPS scaling that would suggest CPU bottlenecks.
Measured FPS Breakdown
The measured FPS data provides a complete picture across three resolutions and four settings presets. At 1920x1080, the system delivers 171.8 FPS at Low, 132.6 FPS at Medium, 110.5 FPS at High, and 87.2 FPS at Ultra. These results show a smooth progression with settings, where each preset step costs roughly 15-25% performance. The 1080p results are uniformly excellent, with even Ultra maintaining nearly 90 FPS.
At 2560x1440, the averages are 113.7 FPS at Low, 86.2 FPS at Medium, 71.6 FPS at High, and 56.4 FPS at Ultra. The 1440p results indicate that High is the sweet spot for 60+ FPS gaming, while Ultra dips below 60 FPS. The transition from 1080p to 1440p costs approximately 34% performance at each preset, which is consistent with the increased pixel workload.
At 3840x2160, the averages drop to 61.8 FPS at Low, 48.4 FPS at Medium, 42 FPS at High, and 29.6 FPS at Ultra. The 4K results show a more pronounced penalty for Ultra, which is 30% slower than High. Only the Low preset achieves above 60 FPS at 4K, and the gap between Medium and High (6.4 FPS) is smaller than between Low and Medium (13.4 FPS), suggesting diminishing returns as settings increase. The 4K Ultra result of 29.6 FPS is the only measurement that falls below 30 FPS, indicating a hard limit for this combo's capability.
Settings Recommendations
For the best experience based on the measured data, the High preset at 2560x1440 delivers 71.6 FPS, which is above the 60 FPS threshold and provides a strong balance of visual quality and performance. At 1920x1080, Ultra is viable at 87.2 FPS, making it the recommended choice for users prioritizing image quality on 1080p displays. The 1080p Medium preset at 132.6 FPS is ideal for high-refresh-rate monitors, as it exceeds 120 FPS.
At 4K, the data recommends the Low preset (61.8 FPS) as the only playable option, though users could consider Medium (48.4 FPS) if they tolerate sub-60 FPS. The Ultra preset is not recommended at any resolution above 1080p, as it produces 56.4 FPS at 1440p and 29.6 FPS at 4K. For a consistent 60+ FPS experience across all settings, the 1080p resolution with Medium or High presets offers the best margin, while 1440p High provides the highest visual fidelity without dropping below 60 FPS. The data suggests that this combo is best utilized at 1080p for maximum frame rates or 1440p for balanced quality, with 4K reserved for users who prioritize resolution over smoothness.
Hardware Specifications
AMD Ryzen 7 5700X3D
AMD Radeon RX 6700 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700X3D + AMD Radeon RX 6700 XT in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 61.8 |
| 3840x2160 | Medium | 48.4 |
| 3840x2160 | High | 42.0 |
| 3840x2160 | Ultra | 29.6 |
| 2560x1440 | Low | 113.7 |
| 2560x1440 | Medium | 86.2 |
| 2560x1440 | High | 71.6 |
| 2560x1440 | Ultra | 56.4 |
| 1920x1080 | Low | 171.8 |
| 1920x1080 | Medium | 132.6 |
| 1920x1080 | High | 110.5 |
| 1920x1080 | Ultra | 87.2 |
The Technomancer with Ryzen 7 5700X3D + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with RX 6700 XT + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 7 5700X3D + RX 6700 XT
Explore FPS benchmarks for other games using this same hardware combination.