Downfall

FAQ

Q: What is the average FPS for this combo at 1080p with High settings?

A: The AMD Ryzen 5 7600 + NVIDIA GeForce GTX 1050 Ti delivers 46.8 FPS on average at 1920x1080 with High settings in Downfall.

Q: How does the GTX 1050 Ti compare to its closest GPU rival in raw benchmark scores?

A: The GTX 1050 Ti has an average benchmark score of 5316, which is essentially tied with the NVIDIA GeForce 930A at 5317 (0% delta) and is 0.4% ahead of the GeForce 940M at 5297.

Q: What is the best playable setting at 1440p for this combo?

A: At 2560x1440, Low settings produce 54.7 FPS on average, which is the only setting tier at this resolution that exceeds 50 FPS. Medium drops to 41.1 FPS, High falls to 33.8 FPS, and Ultra is 25.2 FPS.

Q: Does the CPU bottleneck the GPU in this pairing?

A: The data indicates the opposite. The Ryzen 5 7600 sits in the 83rd percentile among all CPUs with an average benchmark score of 26617, while the GTX 1050 Ti sits in the 30th percentile. The GPU is the limiting factor across all measured resolutions.

Q: Is 4K playable with this hardware?

A: No. At 3840x2160, even Low settings only reach 32.2 FPS on average. Ultra drops to 16 FPS, and High is 19.7 FPS. None of these results are comfortably playable for a horror game requiring responsiveness.

Q: How does the Ryzen 5 7600 compare to the Ryzen 7 5800X3D in CPU performance?

A: The Ryzen 5 7600 scores 26617 on average, which is 0.2% higher than the Ryzen 7 5800X3D's 26574. The two are effectively identical in overall CPU benchmark performance.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is a Pascal-architecture part built on a 14 nm process at Samsung, with a chip size of 132 mm² and 3,300 million transistors. Its 4 GB of GDDR5 memory on a 128-bit bus provides 112.1 GB/s of bandwidth, which is a key constraint in Downfall at higher resolutions. The GPU's base clock is 1291 MHz with a boost of 1392 MHz, and its memory runs at 1752 MHz (7 Gbps effective). With 768 shading units, 48 TMUs, and 32 ROPs, the card delivers 2.138 TFLOPS of FP32 compute and a texture rate of 66.82 GTexel/s.

The benchmark results show clear evidence of GPU-bound behavior. At 1080p Low, the card produces 75.2 FPS, but this drops sharply as settings and resolution increase. The 4 GB VRAM capacity is likely a limiting factor at 4K, where even Low settings yield only 32.2 FPS. The GTX 1050 Ti's percentile rank of 30 among all GPUs places it near the bottom of the performance spectrum, and its average benchmark score of 5316 is nearly identical to the GeForce 930A (5317). In DirectX 12 workloads specifically, the card scores 26 in Passmark, which is notably lower than its DirectX 11 score of 45, suggesting the Pascal architecture struggles with modern API overhead in this title.

How This Combo Ranks

This combination of AMD Ryzen 5 7600 and NVIDIA GeForce GTX 1050 Ti ranks 1720 out of 1741 tested combos in Downfall. That places it in the bottom 1.2% of all configurations tested for this game. The ranking is heavily dragged down by the GPU, not the CPU. The Ryzen 5 7600 is a top-tier processor in the 83rd percentile, while the GTX 1050 Ti sits in the 30th percentile.

The CPU's average benchmark score of 26617 puts it 0.2% ahead of the AMD Ryzen 7 5800X3D (26574) and 0.3% ahead of the Intel Core i9-11900K (26546). It trails the Intel Core i9-12900HK by 0.2% (26672). In contrast, the GPU's closest rivals are all low-end parts: the GeForce 930A (0% delta), GeForce 940M (0.4% ahead), Radeon R7 240 (0.7% ahead), and Radeon R7 M445 (0.8% behind). The massive disparity between CPU and GPU performance tiers explains the poor overall ranking — the processor is never the bottleneck, and the graphics card simply cannot push higher frame rates.

Measured FPS Breakdown

At 1920x1080, the GTX 1050 Ti produces 75.2 FPS on Low, 59.5 FPS on Medium, 46.8 FPS on High, and 31.9 FPS on Ultra. The 1080p Low result is the only configuration in the entire dataset that approaches a high-refresh experience. Medium is playable at nearly 60 FPS, while High dips below 50 FPS.

Moving to 2560x1440, the numbers fall predictably: Low yields 54.7 FPS, Medium 41.1 FPS, High 33.8 FPS, and Ultra 25.2 FPS. The 1440p Low setting is the only result at this resolution that maintains smoothness above 50 FPS.

At 3840x2160, performance collapses. Low averages 32.2 FPS, Medium 28.8 FPS, High 19.7 FPS, and Ultra 16 FPS. None of these are acceptable for a horror title where responsive input matters. The pattern across all resolutions shows a consistent 20-30% drop when moving from Low to Medium, and another 20-30% drop from Medium to High, with Ultra exacting an additional heavy penalty.

Resolution Scaling

The FPS drop from 1080p to 4K reveals the GPU's memory bandwidth and fill rate limits. At Low settings, 1080p produces 75.2 FPS and 4K produces 32.2 FPS — a 57% reduction in performance. At High settings, the drop is from 46.8 FPS to 19.7 FPS, a 58% reduction. This scaling is remarkably consistent across settings, suggesting that the GPU's pixel throughput (44.54 GPixel/s) and texture rate (66.82 GTexel/s) are the binding constraints rather than any specific setting.

The 4 GB VRAM buffer is also likely exceeded at 4K with higher settings, which would explain why the Ultra preset at 3840x2160 collapses to 16 FPS. The 112.1 GB/s memory bandwidth is simply insufficient for 8.3 million pixels at high detail levels. The data points to a pure GPU bottleneck: the Ryzen 5 7600's 83.2 GB/s memory bandwidth and 32 MB of L3 cache are more than adequate for this workload, and the CPU's single-thread score of 999 in 3DMark confirms it is not holding back the GPU.

Settings Recommendations

The measured data points to Low settings as the only viable choice for this GPU at any resolution. At 1080p Low, the combo achieves 75.2 FPS, which is the only result above 60 FPS in the entire dataset. Medium at 1080p yields 59.5 FPS, which is borderline acceptable but requires sacrificing visual quality for only marginal gains over Low.

For players targeting 1440p, Low settings (54.7 FPS) is the sole playable option. Medium at 1440p drops to 41.1 FPS, which is below the 45 FPS threshold most horror games need for smooth camera movement. At 4K, no setting is recommended; even Low produces only 32.2 FPS, and the visual fidelity at Low on a 4K panel will not compensate for the stutter.

The data suggests that the GTX 1050 Ti is best paired with 1080p displays. The 75.2 FPS at Low settings is the only configuration that provides a genuinely smooth experience. Medium at 59.5 FPS is a reasonable compromise if the user prioritizes visual fidelity over frame rate, but the 20% performance penalty over Low is steep for the modest visual improvement in this title.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, built on TSMC's 5 nm process with Zen 4 (Raphael) architecture. It has a base clock of 3.80 GHz and a boost clock of 5.10 GHz, with a 65 W TDP. The CPU's cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3. Its 3DMark scores are strong: 999 for single-thread, 1938 for 2-threads, 3686 for 4-threads, 5508 for 8-threads, and 6503 for max threads.

In Downfall, the CPU's role is minimal because the GPU is so severely underpowered. The Ryzen 5 7600's Cinebench R23 multi-core score of 22992 and single-core score of 3246 indicate it can handle any game logic or physics workload this title throws at it. The 83rd percentile CPU ranking versus the 30th percentile GPU ranking makes the bottleneck clear.

The CPU's 3DMark 16-thread score of 6499 and max-thread score of 6503 show excellent scaling, but Downfall does not need that much compute power. The processor never becomes a limiting factor at any resolution or setting tier in the measured data. Even at 1080p Low, where the GPU produces 75.2 FPS, the CPU is likely idle relative to its capacity. The 5.10 GHz boost clock and 12 threads are more than sufficient for this 2016 horror title, whose CPU demands are modest by modern standards.