The Technomancer

The AMD Ryzen 5 7500F paired with the AMD Radeon RX 6750 XT delivers a playable experience in The Technomancer, but the data clearly shows that this combination is heavily constrained by the graphics card. The measured frame rates reveal a predictable pattern where the GPU becomes the limiting factor as resolution increases. At 1080p, the combo produces high frame rates that suggest a strong CPU capable of feeding the GPU, but at 4K, the frame rates drop to levels that are only suitable for lower settings. This pairing is best suited for 1080p and 1440p gaming, where it can maintain smooth performance across most presets.

Resolution Scaling

The frame rate drop from 1080p to 4K is substantial and consistent across all settings, indicating that the RX 6750 XT is the primary bottleneck at higher resolutions. At Low settings, the average frame rate falls from 178.2 FPS at 1080p to 114.9 FPS at 1440p, and then to 64.4 FPS at 4K. This represents a 36% decrease from 1080p to 1440p and a 44% decrease from 1440p to 4K, showing that the GPU’s rendering load scales steeply with pixel count.

The pattern is similar at High settings, where the average frame rate drops from 115.8 FPS at 1080p to 74.7 FPS at 1440p and then to 39.4 FPS at 4K. The gap between 1440p and 4K at High settings is particularly large, with a 47% reduction, which points to the GPU’s memory bandwidth and compute resources being overwhelmed. The RX 6750 XT has a 192-bit memory bus and 432.0 GB/s bandwidth, figures that are adequate for 1440p but insufficient for maintaining high frame rates at 4K with demanding presets.

At Ultra settings, the scaling is even more punishing. The average frame rate drops from 94.4 FPS at 1080p to 57.3 FPS at 1440p, and then to 31.1 FPS at 4K. The 4K Ultra result is below the 30 FPS threshold for playability, making that configuration effectively unusable for a smooth experience. The data suggests that the CPU, with its boost clock of 5.00 GHz, is not the limiting factor in these scenarios; the GPU’s 13.31 TFLOPS of FP32 performance simply cannot handle the pixel throughput required at 4K.

CPU Role

The Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. Its multi-threaded performance is strong, as indicated by a Cinebench R23 multi-core score of 22799, which places it in the 82nd percentile among all CPUs. However, in The Technomancer, the CPU’s role appears secondary to the GPU, since frame rates scale primarily with resolution rather than with CPU-bound settings.

The single-thread performance is also solid, with a 3DMark single-thread score of 974 and a PassMark single-thread score of 3841. This is relevant because The Technomancer is an action RPG that likely has a main game thread that benefits from high single-core clocks. The data shows that at 1080p Low, the combo achieves 178.2 FPS, which is a high enough frame rate to suggest that the CPU is capable of handling the game’s logic without bottlenecking the GPU. The CPU’s 32 MB of shared L3 cache also helps reduce memory latency, which can be beneficial in open-world scenarios with many objects.

The CPU’s 65W TDP and 5 nm process node mean it runs efficiently, but the RX 6750 XT, with a 250W TDP, is the power-hungry component. The CPU’s 12 threads are sufficient for modern games, and its performance relative to rivals is tight: it is 0.1% ahead of the Intel Core i7-11850H and 0.4% ahead of the AMD Ryzen 9 6900HX in average benchmark score, but 0.3% behind the AMD Ryzen 7 2700X and AMD Ryzen 5 8400F. These differences are negligible in real-world gaming, so the CPU is not a weak link in this combo.

How This Combo Ranks

Among all tested combinations of CPUs and GPUs in The Technomancer, this pairing of the Ryzen 5 7500F and the RX 6750 XT ranks 856th out of 1656 combos. This places it in the lower-middle half of the database, which is a modest result. The rank reflects the GPU’s mid-range position, as the RX 6750 XT sits in the 79th percentile among all GPUs but is only 0.2% ahead of the AMD Radeon RX 5600M in average benchmark score.

The GPU’s nearest rivals reveal the competitive landscape: it is 0.3% behind the NVIDIA GeForce RTX 5070 Ti Mobile and 0.9% behind the AMD Radeon 880M, but 1.3% behind the NVIDIA GeForce RTX 3080. These small deltas suggest that the RX 6750 XT is a capable but not exceptional card, and its ranking in The Technomancer is consistent with its overall performance profile. The rank of 856 out of 1656 indicates that many other combos, likely those with higher-end GPUs, will achieve better frame rates, especially at higher resolutions.

The CPU’s high percentile ranking (82nd) does not boost the combo’s position in this game because the GPU is the limiting factor. A stronger GPU would likely push this combo higher in the rankings, but as configured, the data shows that the frame rates are bounded by the GPU’s capabilities. For a 1080p-focused build, this rank is acceptable, but for 1440p or 4K enthusiasts, it falls short.

Measured FPS Breakdown

At 1080p, the combo delivers excellent performance across all settings. Low settings produce an average of 178.2 FPS, Medium produces 139.2 FPS, High produces 115.8 FPS, and Ultra produces 94.4 FPS. The jump from Low to Medium is a 22% reduction, while the jump from High to Ultra is an 18% reduction, showing that the scaling is relatively smooth and that even Ultra settings remain highly playable at this resolution.

At 1440p, the performance is still strong but begins to show the GPU’s limits. Low settings yield 114.9 FPS, Medium yields 88.7 FPS, High yields 74.7 FPS, and Ultra yields 57.3 FPS. The transition from 1080p to 1440p at High settings is a 36% drop, which is significant. Ultra at 1440p is still above 60 FPS, making it viable for smooth gameplay, but the margin is thinner.

At 4K, the combo struggles to maintain high frame rates. Low settings produce 64.4 FPS, which is playable, but Medium drops to 47.8 FPS, High drops to 39.4 FPS, and Ultra drops to 31.1 FPS. The gap between Low and Ultra at 4K is a 52% reduction, indicating that the GPU’s shading units and ROPs are heavily taxed. The 64 ROPs and 160 TMUs are not enough to sustain high throughput at this resolution, and the 12 GB of GDDR6 memory, while ample, cannot compensate for the raw compute limits.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: The data shows the combo is best suited for 1080p and 1440p gaming. At 1080p, all settings are above 94 FPS, and at 1440p, even Ultra is above 57 FPS, making both resolutions viable for smooth gameplay.

Q: Can this combo handle 4K gaming?

A: Yes, but only at Low settings, which produce 64.4 FPS. Medium settings drop to 47.8 FPS, High to 39.4 FPS, and Ultra to 31.1 FPS, making those presets less playable.

Q: How does the CPU compare to its nearest rivals in benchmark scores?

A: The Ryzen 5 7500F is 0.1% ahead of the Intel Core i7-11850H and 0.4% ahead of the AMD Ryzen 9 6900HX, but 0.3% behind the AMD Ryzen 7 2700X and AMD Ryzen 5 8400F.

Q: What is the GPU’s performance ranking relative to all GPUs?

A: The RX 6750 XT is in the 79th percentile among all GPUs, and it is 0.2% ahead of the AMD Radeon RX 5600M but 1.3% behind the NVIDIA GeForce RTX 3080.

Q: How does the combo rank among all tested combos in this game?

A: The combo ranks 856th out of 1656 tested combos, placing it in the lower-middle half of the database.

Q: What is the frame rate difference between High and Ultra at 1440p?

A: At 1440p, High settings produce 74.7 FPS, while Ultra produces 57.3 FPS, a difference of 17.4 FPS or roughly 23%.

Settings Recommendations

For 1080p gaming, the Ultra preset is the best choice, as it delivers 94.4 FPS, which is well above the 60 FPS threshold for smooth play. There is no need to lower settings at this resolution, as even the most demanding preset is fully playable. The data shows that Ultra at 1080p provides the highest visual quality without sacrificing performance.

For 1440p gaming, the High preset is the sweet spot, delivering 74.7 FPS. This provides a good balance between visual fidelity and smoothness. The Ultra preset at 57.3 FPS is also playable, but it is close to the 60 FPS mark, so players who prefer a higher frame rate margin should stick with High. The Medium preset at 88.7 FPS is a viable alternative for those who prioritize frame rate over visuals.

For 4K gaming, the Low preset is the only recommended option, as it produces 64.4 FPS. The Medium preset at 47.8 FPS and High at 39.4 FPS are below the 60 FPS threshold, and Ultra at 31.1 FPS is barely playable. The data suggests that 4K is not the intended use case for this combo, but if the user insists on it, Low settings are the only way to achieve a smooth experience.