Barony
This combination delivers exceptional performance with an average of 167 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 54 | 76 | 89 | 119 |
| 1440p QHD | 104 | 145 | 169 | 228 |
| 1080p Full HD | 165 | 230 | 268 | 361 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 7500F + AMD Radeon RX 6750 XT, In-Depth Analysis
The AMD Ryzen 5 7500F paired with the AMD Radeon RX 6750 XT delivers a robust Barony experience, landing at rank 1709 out of 3717 tested combos in this database. That placement places it comfortably in the upper half of all tested configurations, roughly in the 46th percentile of the 3717 combos tracked for this game. The combo’s standing reflects a balanced pairing: the CPU sits at the 77th percentile against all tested CPUs, while the GPU holds the 71st percentile against all tested GPUs, meaning neither component is dramatically holding the other back in this roguelike title. Barony, released in June 2015, is a genre-defining roguelike, and the measured data shows this system handles it with significant headroom across most settings and resolutions. The strongest result appears at 1920x1080 with Low settings, where the average frame rate reaches 361 FPS, while the most demanding scenario — 3840x2160 at Ultra — still produces a playable 54 FPS average. This is not a configuration that struggles with Barony; rather, it excels in lower resolutions and only begins to show strain at 4K with maximum quality presets.
How This Combo Ranks
The combo’s rank of 1709 out of 3717 tested combinations places it in the upper-middle tier of all systems evaluated for Barony. With 3717 total combos in the database, this pairing outperforms approximately 54% of tested configurations, a solid result for a mid-range desktop setup. The CPU’s percentile of 77 against all CPUs is notably higher than the GPU’s 71 against all GPUs, suggesting the processor has slightly more headroom relative to its peers than the graphics card does. This imbalance is minor, though, and the measured FPS data confirms that the GPU is the primary driver of performance in Barony, as frame rates scale predictably with resolution and settings changes.
Comparing the two components to their nearest rivals clarifies the picture. The Ryzen 5 7500F shows an average benchmark score of 24964, which is 0.1% ahead of the Intel Core i7-11850H (24935), 0.2% ahead of the Intel Core i7-13620H (24911), and 0.4% ahead of the Intel Core 5 210H (24872). It trails the AMD Ryzen 5 8400F by 0.2%, with that chip scoring 25005. These deltas are all within a fraction of a percent, meaning the 7500F is effectively performance-equivalent to its closest competitors in synthetic workloads. The GPU tells a similar story: the RX 6750 XT scores 26011 on average, which is 0.5% ahead of the AMD Radeon R9 M395X (25891), 0.6% ahead of the AMD FirePro W7100 (25856), 0.7% ahead of the AMD FirePro D700 (25842), and 1.1% ahead of the NVIDIA GeForce RTX 3080 Ti Mobile (25740). None of these rival GPUs are modern desktop parts, but the data shows the RX 6750 XT holds a slight edge over all of them.
In game-specific terms, the rank of 1709 versus 3717 means this combo is better than average but not near the top. For a game like Barony, which is not graphically demanding by modern standards, this performance level is more than sufficient. The measured FPS data reinforces this: even at 4K Ultra, the average stays above 50 FPS, and at 1080p, every settings preset clears 165 FPS. The combo’s rank is thus less about raw capability and more about how many higher-end systems exist in the database — systems with flagships GPUs and CPUs that naturally score higher. For its component class, this pairing performs admirably.
CPU Role
The AMD Ryzen 5 7500F is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture (codenamed Raphael) using TSMC’s 5 nm process. It has a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with a 65 W TDP. The cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. Memory support is DDR5 with dual-channel configuration, providing 83.2 GB/s of bandwidth. The CPU uses the AMD Socket AM5 and supports PCIe Gen 5 with 24 lanes from the CPU. It has no integrated graphics, so a discrete GPU is mandatory.
In Barony, the CPU’s role is secondary to the GPU, but the 7500F’s strong single-thread and multi-thread performance ensures it never becomes a bottleneck at lower resolutions. The single-thread score from 3DMark is 974, while the 2-thread score is 1902, and the 4-thread score reaches 3621. These numbers indicate solid per-core performance, which matters for a roguelike that may rely on game logic, pathfinding, and procedural generation rather than heavy graphics. The 8-thread score of 5372 and max-thread score of 6379 show that the 6-core/12-thread configuration scales well when additional threads are utilized. Cinebench results reinforce this: R15 multicore scores 2298, R20 multicore scores 9575, and R23 multicore scores 22799. The single-core Cinebench scores are 324 (R15), 1351 (R20), and 3218 (R23), all indicating strong per-core performance.
The CPU’s percentile of 77 means it outperforms 77% of all CPUs in the database, which is a strong showing for a mid-range desktop part. Its average benchmark score of 24964 places it just 0.1% ahead of the Intel Core i7-11850H and 0.2% behind the AMD Ryzen 5 8400F, as noted earlier. In Barony specifically, the CPU’s contribution is most evident at 1080p with Low settings, where the average FPS hits 361 — a figure that likely approaches the CPU’s ceiling for frame generation in this game. At higher resolutions, the GPU takes over as the limiting factor, but the 7500F’s 12 threads provide enough parallelism for any background tasks or game logic threads.
With a boost clock of 5.00 GHz and Zen 4’s architecture, the 7500F delivers responsive performance in CPU-bound scenarios. The 32 MB of L3 cache helps with data locality, and the 83.2 GB/s memory bandwidth ensures the CPU can feed the GPU without stalling. While Barony is not a CPU-heavy game, the measured FPS at 1080p Low (361 FPS) suggests the CPU is capable of very high frame throughput when the GPU is not the constraint. The passmark single-thread score of 3841 and multithread score of 26825 further confirm that this processor is well-suited for gaming workloads, even if its 6-core/12-thread configuration is modest compared to higher-end parts.
GPU Role
The AMD Radeon RX 6750 XT is a Radeon RX 6000 series GPU based on the Navi 22 chip and RDNA 2.0 architecture, built on TSMC’s 7 nm process. It has 12 GB of GDDR6 memory on a 192-bit bus, providing 432.0 GB/s of bandwidth. The GPU operates at a base clock of 2150 MHz, a boost clock of 2600 MHz, and a game clock of 2495 MHz. Memory runs at 2250 MHz, which translates to 18 Gbps effective. The GPU has 2560 shading units, 160 texture mapping units, 64 raster operation units, and 40 ray tracing cores. Its peak pixel rate is 166.4 GPixel/s, texture rate is 416.0 GTexel/s, and FP32 performance is 13.31 TFLOPS. The TDP is 250 W, requiring a 600 W suggested PSU and a dual-slot cooler with one 6-pin and one 8-pin power connector.
In Barony, the RX 6750 XT is the dominant performance factor. The measured FPS data shows clear scaling with resolution and settings, which is typical for a GPU-bound title. At 1920x1080, the average FPS ranges from 165 at Ultra to 361 at Low, with Medium at 268 and High at 230. Moving to 2560x1440, the averages drop to 104 at Ultra, 145 at High, 169 at Medium, and 228 at Low. At 3840x2160, the averages fall further to 54 at Ultra, 76 at High, 89 at Medium, and 119 at Low. This scaling indicates that the GPU is the primary limiter at higher resolutions, while at 1080p Low, the CPU may start to become a factor given the very high frame rates.
The GPU’s percentile of 71 against all GPUs means it outperforms 71% of the database’s GPUs. Its average benchmark score of 26011 is 0.5% ahead of the AMD Radeon R9 M395X, 0.6% ahead of the AMD FirePro W7100, 0.7% ahead of the AMD FirePro D700, and 1.1% ahead of the NVIDIA GeForce RTX 3080 Ti Mobile. In 3DMark Steel Nomad DX12, the GPU scores 2548, while Geekbench OpenCL scores 16360, Vulkan scores 98089, and Metal scores 137249. Passmark G3D scores 20700, and GPU compute scores 9550. These synthetic results align with the in-game performance, showing a GPU that is capable of high frame rates in less demanding titles like Barony.
The 12 GB of VRAM is more than sufficient for Barony’s needs, as the game’s visual complexity is limited by its roguelike nature. Even at 4K Ultra, the memory bandwidth of 432.0 GB/s and the 192-bit bus are adequate, as evidenced by the 54 FPS average at that setting. The boost clock of 2600 MHz ensures the GPU runs at high frequencies under load, and the 40 ray tracing cores are irrelevant for this game, which does not use ray tracing. The GPU’s DirectX 12 Ultimate support (12_2) and Vulkan 1.4 compatibility mean it is fully capable of running Barony with any modern API, though the game likely uses DirectX 11 given its 2015 release date.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of how this combo performs across three resolutions and four settings presets. At 1920x1080, the lowest resolution tested, the system delivers exceptional frame rates. With Low settings, the average FPS is 361, which is the highest measured value in the entire dataset. Medium settings produce an average of 268 FPS, with a minimum of 228 and a maximum of 309. High settings yield 230 FPS on average, and Ultra settings drop to 165 FPS. All 1080p results exceed 165 FPS, meaning this combo is well-suited for high-refresh-rate monitors at this resolution, even with maximum quality settings.
At 2560x1440, performance remains strong but steps down noticeably. Low settings average 228 FPS, Medium averages 169 FPS with a minimum of 144 and maximum of 195, High averages 145 FPS, and Ultra averages 104 FPS. The 1440p results show that the GPU begins to feel the load at higher quality presets, but even Ultra stays above 100 FPS, which is smooth for most displays. The minimum FPS of 144 at Medium settings suggests that frame pacing is consistent, with no major dips below the refresh rate of a typical 144 Hz monitor.
At 3840x2160, 4K resolution, the combo still provides playable performance, but the margins shrink. Low settings average 119 FPS, Medium averages 89 FPS with a minimum of 75 and maximum of 102, High averages 76 FPS, and Ultra averages 54 FPS. The 4K Ultra result is the weakest in the dataset, but 54 FPS is still above the 30 FPS threshold for playability, though it may not satisfy users with high-refresh-rate 4K panels. The Medium setting at 4K (89 FPS) offers a good balance, with the minimum of 75 FPS ensuring no severe stutters.
The data reveals a consistent pattern: each step up in resolution or settings reduces the average FPS by a predictable margin. For example, at 1080p, moving from Low to Medium drops the average from 361 to 268 (a 26% reduction), from Medium to High drops it to 230 (14% reduction), and from High to Ultra drops it to 165 (28% reduction). At 1440p, the same progression goes from 228 to 169 (26% reduction), to 145 (14% reduction), to 104 (28% reduction). At 4K, the progression goes from 119 to 89 (25% reduction), to 76 (15% reduction), to 54 (29% reduction). This consistency indicates that the GPU scales predictably with load.
The minimum FPS data is only provided for Medium settings across all resolutions: 228 at 1080p, 144 at 1440p, and 75 at 4K. These minimums are close to the averages (268, 169, and 89 respectively), suggesting stable frame delivery without significant drops. The absence of min/max data for other settings means we cannot assess frame variance there, but the average values alone are sufficient to characterize the combo’s performance as smooth and consistent.
FAQ
Q: What is the best resolution for this combo in Barony?
A: Based on the measured FPS, 1920x1080 is the strongest resolution, with all settings presets exceeding 165 FPS average. At 2560x1440, the combo still delivers over 100 FPS at Ultra, making it viable for high-refresh-rate 1440p monitors. At 3840x2160, only Low and Medium settings exceed 89 FPS, with Ultra dropping to 54 FPS.
Q: How does this combo perform at 4K Ultra settings?
A: At 3840x2160 with Ultra settings, the average FPS is 54, which is playable but below the 60 FPS threshold that many users prefer. The GPU’s 12 GB of VRAM and 432.0 GB/s bandwidth are sufficient, but the RDNA 2.0 architecture’s 13.31 TFLOPS of FP32 performance limits the frame rate at this demanding preset.
Q: Is the CPU or GPU the bottleneck in Barony?
A: The data suggests the GPU is the primary bottleneck at higher resolutions and settings. At 1080p Low, the average FPS reaches 361, which is likely near the CPU’s frame generation limit, but at 4K Ultra, the GPU’s workload dominates, and the FPS drops to 54. The CPU’s 77th percentile ranking versus the GPU’s 71st percentile also indicates the CPU has slightly more headroom.
Q: How does the Ryzen 5 7500F compare to its nearest rivals?
A: The Ryzen 5 7500F has an average benchmark score of 24964, which is 0.1% ahead of the Intel Core i7-11850H, 0.2% ahead of the Intel Core i7-13620H, and 0.4% ahead of the Intel Core 5 210H. It trails the AMD Ryzen 5 8400F by 0.2%. All deltas are within a fraction of a percent, indicating near-identical performance.
Q: What settings preset gives the highest average FPS at 2560x1440?
A: At 2560x1440, Low settings produce the highest average FPS at 228, followed by Medium at 169, High at 145, and Ultra at 104. The Medium preset offers a good balance, with a minimum FPS of 144 and maximum of 195, ensuring consistent frame delivery.
Q: Does this combo support ray tracing in Barony?
A: The GPU has 40 ray tracing cores and supports DirectX 12 Ultimate, but Barony is a roguelike from 2015 that does not implement ray tracing. The measured FPS data does not include any ray tracing scenarios, so the ray tracing hardware is unused in this game.
Settings Recommendations
For users seeking the best overall experience, the Medium preset at 1920x1080 or 2560x1440 offers the ideal balance. At 1080p Medium, the average FPS is 268, with a minimum of 228 and maximum of 309, ensuring smooth gameplay on any monitor. At 1440p Medium, the average drops to 169 FPS, with a minimum of 144 and maximum of 195, which still exceeds the refresh rate of most 144 Hz displays. The Medium preset provides a significant visual upgrade over Low while maintaining frame rates well above playable thresholds.
For competitive play or maximum frame rates, Low settings at 1080p deliver 361 FPS on average, which is ideal for 240 Hz or 360 Hz monitors. At 1440p Low, the average is 228 FPS, still suitable for high-refresh-rate panels. Low settings sacrifice visual fidelity, but in a roguelike like Barony, the gameplay clarity may benefit from reduced effects.
For visual quality, Ultra settings at 1440p produce 104 FPS average, which is acceptable for most users, but at 4K Ultra, the average drops to 54 FPS, which may be too low for smooth gameplay on high-refresh-rate 4K displays. High settings at 4K (76 FPS) or Medium at 4K (89 FPS) are better choices for 4K users, as they maintain higher frame rates while still providing decent visuals. The data shows that Medium settings at 4K offer the best compromise, with a minimum FPS of 75 ensuring no major stutters.
Given the measured numbers, the recommended configuration is 2560x1440 with Medium settings, which yields 169 FPS average and a minimum of 144 FPS. This combination provides high frame rates, good visual quality, and consistent performance. For users with 1080p monitors, High settings (230 FPS) or Ultra (165 FPS) are both excellent, depending on whether visual fidelity or frame rate is prioritized. At 4K, Medium (89 FPS) is the sweet spot, as it stays above 75 FPS minimum while offering a marked improvement over Low settings. The GPU’s 12 GB VRAM and 432.0 GB/s bandwidth ensure that even the most demanding settings do not cause memory-related stutters, but the processing power limits Ultra 4K to 54 FPS.
Hardware Specifications
AMD Ryzen 5 7500F
AMD Radeon RX 6750 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500F + AMD Radeon RX 6750 XT in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 119.0 |
| 3840x2160 | Medium | 89.0 |
| 3840x2160 | High | 76.0 |
| 3840x2160 | Ultra | 54.0 |
| 2560x1440 | Low | 228.0 |
| 2560x1440 | Medium | 169.0 |
| 2560x1440 | High | 145.0 |
| 2560x1440 | Ultra | 104.0 |
| 1920x1080 | Low | 361.0 |
| 1920x1080 | Medium | 268.0 |
| 1920x1080 | High | 230.0 |
| 1920x1080 | Ultra | 165.0 |
Barony with Ryzen 5 7500F + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 6750 XT + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 7500F + RX 6750 XT
Explore FPS benchmarks for other games using this same hardware combination.