Steamworld Build
This combination provides smooth gameplay with an average of 90 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 26 | 39 | 52 | 67 |
| 1440p QHD | 49 | 73 | 97 | 127 |
| 1080p Full HD | 77 | 115 | 153 | 200 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with Intel Core Ultra 5 245 + NVIDIA GeForce RTX 5050, In-Depth Analysis
Steamworld Build, a city builder released on 2023-11-30, presents a specific workload that stresses both the processor and the graphics card differently depending on the resolution and quality settings. This analysis examines the performance of the Intel Core Ultra 5 245 paired with the NVIDIA GeForce RTX 5050, using measured FPS data to determine the balance between the CPU and GPU across various configurations.
Resolution Scaling
The measured data for this combo reveals a classic pattern of GPU-bound scaling as resolution increases. At 1920x1080 with Low settings, the system achieves an average of 200 FPS. Moving to 2560x1440 at Low settings, the average drops to 127 FPS, a reduction of 73 FPS. At 3840x2160 with Low settings, the average falls further to 67 FPS. The scaling from 1080p to 1440p represents a 36.5% decrease in frame rate, while going from 1440p to 4K results in a 47.2% decrease. These substantial drops indicate that the rendering load is scaling heavily with pixel count.
For High settings, the progression is similar but more compressed. The average FPS at 1920x1080 is 115, which drops to 73 at 2560x1440, and then to 39 at 3840x2160. The transition from 1080p to 1440p shows a 42 FPS loss, and from 1440p to 4K shows a 34 FPS loss. The percentage drops are 36.5% and 46.6% respectively, showing that the relative performance hit from resolution scaling remains consistent regardless of the quality preset.
Ultra settings demonstrate the most extreme scaling, with the average FPS falling from 77 at 1080p, to 49 at 1440p, and finally to 26 at 4K. This represents a 36.4% drop from 1080p to 1440p and a 46.9% drop from 1440p to 4K. The consistency of these percentage drops across all settings—hovering around 36-37% for the first step and 46-47% for the second—strongly indicates that the GPU is the limiting component in these scenarios. The RTX 5050, with its 8 GB of GDDR6 memory and 128-bit bus width, is being tasked with an increasing number of pixels, and its performance degrades predictably as the fill-rate demand grows.
The data also shows how the settings preset amplifies the resolution cost. At 1080p, the difference between Low and Ultra is 123 FPS. At 1440p, that difference shrinks to 78 FPS. At 4K, it shrinks further to 41 FPS. This narrowing gap at higher resolutions is a hallmark of a GPU bottleneck; the absolute performance ceiling is so low at 4K that the additional work from higher settings has less headroom to impact. The limiting component is clearly the GPU across all resolutions tested, as the frame rate scales almost entirely with pixel throughput.
CPU Role
The Intel Core Ultra 5 245 is a 14-core, 14-thread processor based on the Arrow Lake architecture, built on a 3 nm process node. It features a base clock of 3.50 GHz and a boost clock of 5.10 GHz. For a city builder like Steamworld Build, which often involves complex simulation logic and entity management, the CPU plays a crucial role in maintaining frame rates, especially when the camera is zoomed out and large portions of the map are visible.
The benchmark results for this CPU show strong single-threaded performance, with a Cinebench R23 single-core score of 4648 and a Passmark single-thread score of 4394. This is important because city builders frequently rely on a single main simulation thread. The CPU's 24 MB of shared L3 cache and dual-channel DDR5 memory support help ensure that data can be fed to the cores efficiently.
However, in the context of this game's measured FPS, the CPU appears to be more than sufficient to feed the GPU. At 1080p Low settings, the system hits 200 FPS, which is a very high frame rate that suggests the CPU is capable of handling the game's logic at a rapid pace. The fact that the frame rate drops so dramatically when moving to 4K, even at Low settings (200 to 67 FPS), indicates that the bottleneck shifts entirely to the GPU's pixel processing capabilities. The CPU's performance, as evidenced by its Cinebench R23 multicore score of 32924, is not the limiting factor in this configuration for this game.
The processor's 14 cores and 14 threads mean it has no hyper-threading, but the high boost clock of 5.10 GHz ensures that the primary game thread can run at high speed. Its Passmark multithread score of 38706 and floating point math score of 120548 demonstrate robust computational throughput. Yet, the game's results show that the GPU is the primary constraint. For players using this CPU with a more powerful GPU, there is likely headroom for higher frame rates, but with the RTX 5050, the CPU's role is to provide a stable foundation without introducing a CPU-side frame rate cap at the tested resolutions.
GPU Role
The NVIDIA GeForce RTX 5050 is based on the Blackwell 2.0 architecture and features 2560 shading units, 80 TMUs, and 32 ROPs. It has a base clock of 2317 MHz and a boost clock of 2572 MHz. The GPU is equipped with 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 320.0 GB/s. This memory configuration is a key factor in its performance, as the bandwidth may become a constraint at higher resolutions with demanding textures.
The GPU's performance in Steamworld Build is the defining factor in this combo's results. The measured FPS at 4K Ultra setting is 26 FPS, which is below the threshold for smooth gameplay. The GPU's Passmark G3D score is 17326, and its percentile vs all GPUs is 66, indicating it is a mid-range performer. The data shows that the RTX 5050 struggles to maintain playable frame rates at 4K with high or ultra settings.
The memory bandwidth of 320.0 GB/s appears to be a limiting factor. At 1080p, the GPU can achieve high frame rates (153 FPS at Medium settings), but as the resolution increases, the demand on memory bandwidth and fill rate grows. The 8 GB VRAM capacity is not necessarily exceeded at these tested settings, but the 128-bit bus width limits the speed at which texture and geometry data can be accessed. The performance drop from 1080p Medium (153 FPS) to 1440p Medium (97 FPS) is a 36.6% decrease, which aligns with the increased pixel count. This suggests a pixel-bound scenario rather than a VRAM capacity issue.
The GPU's FP32 performance is rated at 13.17 TFLOPS, which is moderate for the current generation. For a game like Steamworld Build, which may have simpler geometry but potentially many objects on screen, the GPU's ability to process draw calls and render sprites is tested. The data indicates that the RTX 5050 is suitable for 1080p and 1440p gaming at medium to high settings, but it is not capable of delivering a smooth 4K experience in this title, especially at higher quality presets. The GPU is clearly the limiting component in this pair, as evidenced by the consistent frame rate scaling with resolution.
How This Combo Ranks
The combination of the Intel Core Ultra 5 245 and the NVIDIA GeForce RTX 5050 is ranked 1755 out of 2924 tested combos in Steamworld Build. This places it in the 60th percentile of all tested configurations, indicating that it performs better than the majority of systems tested but is not near the top tier. The rank reflects the GPU's mid-range standing, as the CPU is a high-end part (90th percentile vs all CPUs), but the GPU is only in the 66th percentile.
The CPU's nearest rivals include the AMD Ryzen 7 PRO 5755G, which has an average score 0.4% lower, and the Intel Core i5-14600K, which has an average score 0.8% higher. This shows that the Core Ultra 5 245 is very competitive with other modern processors in general benchmarks. However, the GPU's nearest rivals paint a different picture. The AMD Radeon RX 5600 XT has an average score that is 1.6% lower, while the NVIDIA RTX A4000 Mobile has a score that is 1.6% higher. This indicates that the RTX 5050 is in a performance class with older or mobile parts, which explains the combo's mid-pack ranking in this game.
The combo's rank of 1755 suggests that there are many other combinations that yield higher frame rates in Steamworld Build. Given the CPU's strength, the bottleneck is clearly the GPU. If the same CPU were paired with a higher-tier GPU, the ranking would likely improve significantly. The data suggests that this specific pairing is somewhat unbalanced for this title, with the CPU offering more headroom than the GPU can utilize. The measured FPS values, such as 77 FPS at 1080p Ultra, demonstrate that the combo is capable of playable performance but not at the highest levels of smoothness or visual fidelity. The rank of 1755 out of 2924 is a reasonable result for a mid-range GPU paired with a high-end CPU, but it highlights the GPU's limitations in a city builder that can be demanding at higher resolutions.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and the desired frame rate. For a smooth 60 FPS experience at 1920x1080, the High preset is the best choice, delivering an average of 115 FPS. The Medium preset offers even more headroom at 153 FPS, but High provides a good balance of visual quality and performance. The Ultra preset at 1080p yields 77 FPS, which is still playable but may have occasional dips.
At 2560x1440, the High preset delivers an average of 73 FPS, which is above the 60 FPS threshold for most players. The Medium preset provides 97 FPS, offering a very smooth experience, while Ultra drops to 49 FPS, which may be acceptable for some but is not ideal for fast-paced gameplay. For the best experience at 1440p, the High preset is recommended, as it maintains a solid frame rate while providing good visual fidelity.
At 3840x2160, the situation is more challenging. The High preset yields only 39 FPS, and Ultra drops to 26 FPS, both of which are below the 60 FPS target. The Low preset at 4K achieves 67 FPS, which is playable, but the visual quality is significantly reduced. The Medium preset provides 52 FPS, which is a compromise. For 4K gaming, the Low or Medium preset is recommended if a smooth frame rate is prioritized, but players seeking better visuals should stick to 1440p. The data shows that the RTX 5050 is not well-suited for 4K high-fidelity gaming in this title.
The data indicates that the sweet spot for this combo is 1440p with High settings, offering 73 FPS, which is a balance of visual quality and performance. Alternatively, 1080p Ultra at 77 FPS provides a higher visual fidelity with a slightly lower frame rate. For players prioritizing frame rate above all else, 1080p Low at 200 FPS is available, but it does not utilize the GPU's full potential. The recommendation is to target 1440p High for the best overall experience.
Measured FPS Breakdown
The following is the complete breakdown of measured average FPS for each resolution and settings preset:
1920x1080
- Low: 200 FPS
- Medium: 153 FPS (min 130, max 176)
- High: 115 FPS
- Ultra: 77 FPS
2560x1440
- Low: 127 FPS
- Medium: 97 FPS (min 83, max 112)
- High: 73 FPS
- Ultra: 49 FPS
3840x2160
- Low: 67 FPS
- Medium: 52 FPS (min 44, max 59)
- High: 39 FPS
- Ultra: 26 FPS
The min and max FPS data is only available for the Medium preset at each resolution. At 1080p Medium, the frame rate fluctuates between 130 and 176 FPS, showing a variance of 46 FPS. At 1440p Medium, the range is 83 to 112 FPS, a variance of 29 FPS. At 4K Medium, the range is 44 to 59 FPS, a variance of 15 FPS. This tightening of the frame time variance at higher resolutions further confirms the GPU bottleneck, as the frame rate becomes more consistent when the GPU is saturated.
The data shows a clear hierarchy: 1080p Low is the fastest, and 4K Ultra is the slowest. The differences between presets are significant, with the gap between Low and Ultra being 123 FPS at 1080p, 78 FPS at 1440p, and 41 FPS at 4K. This pattern indicates that the GPU's performance ceiling is the primary driver of frame rate, and the settings presets have a diminishing absolute impact as resolution increases. The measured FPS values provide a comprehensive view of the combo's capabilities, showing that it excels at 1080p and 1440p with medium to high settings, but struggles at 4K with high and ultra settings.
FAQ
Q: What is the average FPS for this combo at 1080p with High settings?
A: At 1920x1080 with High settings, the average FPS is 115, which is well above the 60 FPS threshold for smooth gameplay.
Q: Can this system handle 4K gaming in Steamworld Build?
A: The data shows that at 3840x2160, the average FPS ranges from 67 on Low settings to 26 on Ultra settings. While Low settings are playable, the higher presets drop below 40 FPS, making them less suitable for a smooth experience.
Q: Is the CPU or GPU the limiting factor in this game?
A: The benchmark results indicate the GPU is the limiting component. The frame rate scales significantly with resolution, dropping from 200 FPS at 1080p Low to 67 FPS at 4K Low, while the CPU's high benchmark scores suggest it has more headroom than the GPU can use.
Q: What is the best settings preset for 1440p gaming?
A: At 2560x1440, the High preset provides an average of 73 FPS, which is the best balance of visual quality and performance. The Medium preset offers 97 FPS for a smoother experience, while Ultra drops to 49 FPS.
Q: How does this combo rank compared to other tested systems?
A: This combo is ranked 1755 out of 2924 tested combos in Steamworld Build, placing it in the 60th percentile. This is a mid-pack result, reflecting the GPU's mid-range performance class.
Q: What is the highest average FPS recorded for this system?
A: The highest average FPS is 200, achieved at 1920x1080 with Low settings. This demonstrates the CPU's capability to drive very high frame rates when the GPU is not heavily burdened.
Hardware Specifications
Intel Core Ultra 5 245
NVIDIA GeForce RTX 5050
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 5 245 + NVIDIA GeForce RTX 5050 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 67.0 |
| 3840x2160 | Medium | 52.0 |
| 3840x2160 | High | 39.0 |
| 3840x2160 | Ultra | 26.0 |
| 2560x1440 | Low | 127.0 |
| 2560x1440 | Medium | 97.0 |
| 2560x1440 | High | 73.0 |
| 2560x1440 | Ultra | 49.0 |
| 1920x1080 | Low | 200.0 |
| 1920x1080 | Medium | 153.0 |
| 1920x1080 | High | 115.0 |
| 1920x1080 | Ultra | 77.0 |
Steamworld Build with iUltra 5 245 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5050 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with iUltra 5 245 + RTX 5050
Explore FPS benchmarks for other games using this same hardware combination.