Steamworld Build
This combination provides smooth gameplay with an average of 108 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 46 | 62 | 81 |
| 1440p QHD | 59 | 88 | 117 | 153 |
| 1080p Full HD | 93 | 138 | 184 | 240 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5060, In-Depth Analysis
Steamworld Build places the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5060 in a specific performance window that becomes clearer as resolution scales. The measured data shows a system that is decisively GPU-bound at higher resolutions, while the CPU’s 6-core/12-thread configuration provides ample headroom for the game’s simulation logic at lower settings.
Resolution Scaling
The transition from 1920x1080 to 3840x2160 reveals a steep performance curve that is typical of a demanding city builder. At High settings, the average frame rate drops from 138 FPS at 1080p to 88 FPS at 1440p, a 36% reduction, and then further to 46 FPS at 4K, a 48% drop from the 1440p figure. This scaling pattern indicates that the RTX 5060’s rendering pipeline becomes the primary limiter as pixel count increases, with the GPU’s 8 GB of GDDR7 memory and 128-bit bus handling the increased texture and geometry load with diminishing returns.
The Low preset shows a similar trajectory but starts from a much higher baseline. At 1080p, the system achieves 240 FPS, which falls to 153 FPS at 1440p and 81 FPS at 4K. The percentage drops are 36% and 47% respectively, mirroring the High preset’s scaling almost exactly. This consistency suggests that resolution scaling is governed by the GPU’s raw throughput rather than memory bandwidth or cache effects, as the relative performance degradation remains stable across different quality levels.
Medium settings provide the most revealing data because this is the only preset with recorded minimum and maximum frame times. At 4K, the Medium preset averages 62 FPS with a minimum of 53 FPS and a maximum of 71 FPS. The 9 FPS spread between minimum and average indicates that the GPU is working near its capacity, with occasional dips that could be noticeable during heavy construction or resource management scenes. At 1440p, the same preset averages 117 FPS with a minimum of 99 FPS, and at 1080p it averages 184 FPS with a minimum of 156 FPS. The minimum-to-average gap narrows from 9 FPS at 4K to 18 FPS at 1440p and 28 FPS at 1080p, suggesting that frame pacing becomes more consistent as the GPU load decreases.
Ultra settings push the system to its limits. At 4K, the average drops to 31 FPS, which is below the threshold for smooth playability in a game that requires frequent camera pans and zoom operations. The 1440p Ultra result of 59 FPS is borderline, while 1080p Ultra at 93 FPS is playable but noticeably less fluid than the Medium preset. The data shows that Ultra settings demand more from the GPU than the RTX 5060 can consistently deliver at higher resolutions, with the 4K result being particularly constrained.
Settings Recommendations
The measured FPS rows identify Medium as the settings preset that provides the most balanced experience across all three resolutions. At 1080p, Medium delivers 184 FPS, which is 33% higher than High’s 138 FPS and only 23% lower than Low’s 240 FPS. The 156 FPS minimum at this setting ensures that even the most complex scenes remain well above display refresh rates for most monitors. At 1440p, Medium’s 117 FPS average with a 99 FPS minimum provides a smooth experience on high-refresh-rate panels, while High’s 88 FPS is adequate but leaves less headroom for simulation-heavy moments.
For 4K, the choice is more constrained. Medium’s 62 FPS average is the only preset that reaches the 60 FPS threshold, and its 53 FPS minimum means occasional dips below that mark. High at 46 FPS is playable on VRR displays but not ideal, and Low at 81 FPS sacrifices visual fidelity for fluidity. The data suggests that Medium is the recommended preset for 4K, as it offers the best compromise between the visual quality enhancements over Low and the performance advantage over High.
The Ultra preset is not recommended at any resolution based on the measured data. At 4K, its 31 FPS average falls into the range where city builders become difficult to manage due to input lag and visual stuttering. At 1440p, 59 FPS is marginal, and even at 1080p, the 93 FPS average is significantly lower than Medium’s 184 FPS without a proportional visual benefit. The performance delta between Medium and Ultra is 66% at 1080p, 50% at 1440p, and 50% at 4K, indicating that Ultra’s additional effects come at a steep cost.
How This Combo Ranks
The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5060 combination ranks 1636 out of 3706 tested combos in Steamworld Build, placing it in the 56th percentile of all systems. This ranking reflects a configuration that is positioned slightly above the median, with the GPU’s 72nd percentile standing among all GPUs providing most of the performance weight. The CPU’s 73rd percentile ranking among all CPUs is marginally higher, but the game’s scaling behavior shows that the GPU is the deciding factor in most scenarios.
The ranking suggests that this combo is better suited to 1080p and 1440p gaming than 4K. In the context of the 3706 tested combos, the 1636th position indicates that a majority of systems outperform it, but the measured FPS data shows that it still delivers playable frame rates at Medium settings across all resolutions. The combo’s rank would likely improve at lower resolutions, where the CPU’s 6-core/12-thread configuration and the GPU’s 3840 shading units can work more in tandem.
Comparing to the CPU’s nearest rivals, the Ryzen 5 5500’s average benchmark score of 19593 is within 0.7% of the Intel Core i5-11600KF’s 19723 and 0.5% of the Intel Core i7-10700F’s 19499. These small deltas mean that swapping the CPU for any of these alternatives would have a negligible impact on Steamworld Build performance, as the game’s frame rates are primarily GPU-bound. Similarly, the GPU’s nearest rivals, including the AMD Radeon RX 6750 XT at 26011 average score, are within 1.2% of the RTX 5060’s 26331, indicating that the measured FPS results would be nearly identical with those cards.
Measured FPS Breakdown
At 1920x1080, the full settings range is available with high frame rates. Low settings produce 240 FPS, Medium produces 184 FPS with a minimum of 156 FPS and maximum of 212 FPS, High produces 138 FPS, and Ultra produces 93 FPS. The progression from Low to Ultra shows a 61% reduction in average frame rate, with the largest single drop occurring between Medium and High at 25%.
At 2560x1440, the same settings show a compressed range. Low produces 153 FPS, Medium produces 117 FPS with a minimum of 99 FPS and maximum of 135 FPS, High produces 88 FPS, and Ultra produces 59 FPS. The reduction from Low to Ultra is 61%, matching the 1080p pattern, but the absolute values are lower across the board. The Medium preset’s minimum of 99 FPS is particularly noteworthy, as it stays above the 90 FPS threshold that many gamers consider optimal for responsive gameplay.
At 3840x2160, the settings range tightens further. Low produces 81 FPS, Medium produces 62 FPS with a minimum of 53 FPS and maximum of 71 FPS, High produces 46 FPS, and Ultra produces 31 FPS. The Low to Ultra reduction is 62%, consistent with the other resolutions, but the Ultra result falls below 30 FPS territory’s upper boundary. The Medium preset’s minimum of 53 FPS is the only data point below 60 FPS in this resolution, indicating that even the recommended settings will experience occasional stutters during intense gameplay moments.
GPU Role
The NVIDIA GeForce RTX 5060’s 8 GB of GDDR7 memory on a 128-bit bus provides 448.0 GB/s of bandwidth, which is sufficient for Steamworld Build’s texture streaming at 1080p and 1440p but becomes a limiting factor at 4K. The measured FPS data supports this interpretation: the drop from 1440p Medium at 117 FPS to 4K Medium at 62 FPS represents a 47% reduction, which aligns with the 2.25x increase in pixel count that the GPU must process.
The GPU’s boost clock of 2497 MHz and base clock of 2280 MHz are modest for the 50-series, but the 3840 shading units deliver 19.18 TFLOPS of FP32 performance. This compute capacity is what allows the card to maintain 184 FPS at 1080p Medium, as city builders often have many on-screen elements that require vertex processing and pixel shading. The 120 tensor cores and 30 RT cores are present but likely underutilized in this game, as Steamworld Build’s visual style does not heavily rely on ray tracing or AI-enhanced features.
The GPU’s 72nd percentile ranking among all GPUs and its average benchmark score of 26331 place it in the upper-midrange tier. The nearest rivals, including the AMD Radeon 860M at 26401 and the NVIDIA GeForce MX550 at 26421, have average scores within 0.3% of the RTX 5060, which means that real-world gaming performance in this title would be nearly indistinguishable. The 8 GB memory capacity is the primary differentiator, and the data shows that it is adequate for this game’s requirements at 1080p and 1440p, with 4K Ultra being the only setting that exceeds what the memory subsystem can efficiently handle.
FAQ
Q: What is the best resolution for this combo in Steamworld Build?
A: The data shows that 2560x1440 at Medium settings provides 117 FPS with a 99 FPS minimum, which is the highest resolution where the system maintains consistent frame rates above 90 FPS. At 4K, the best result is Medium at 62 FPS, which is playable but less consistent.
Q: Is the RTX 5060’s 8 GB VRAM sufficient for this game?
A: Based on the measured FPS, 8 GB is sufficient for all settings at 1080p and 1440p, as the frame rates remain high. At 4K Ultra, the average drops to 31 FPS, and the 4K Medium minimum of 53 FPS suggests the memory capacity or bandwidth is a contributing factor to performance degradation.
Q: How does the Ryzen 5 5500 compare to its nearest rivals for this game?
A: The Ryzen 5 5500’s average benchmark score of 19593 is within 0.7% of the Intel Core i5-11600KF and 0.5% of the Intel Core i7-10700F. Since Steamworld Build is GPU-bound at most settings, these small CPU differences would not result in meaningful FPS changes.
Q: Should I use Low or Medium settings at 1080p for maximum performance?
A: Low settings cap at 240 FPS, while Medium produces 184 FPS. The 56 FPS difference is significant, but Medium’s 156 FPS minimum ensures that the experience remains smooth on high-refresh-rate displays, making it the better choice unless maximum frame rate is the sole priority.
Q: Is the RTX 5060 better than the AMD Radeon RX 6750 XT for this game?
A: The RTX 5060’s average benchmark score of 26331 is 1.2% higher than the RX 6750 XT’s 26011. This marginal difference would translate to less than 1 FPS variation in the measured scenarios, making the two cards effectively equivalent in Steamworld Build.
Q: Can this combo handle 4K Ultra settings?
A: The measured average of 31 FPS at 4K Ultra is below the 60 FPS threshold for comfortable play. The data indicates that Medium settings at 62 FPS are the highest quality option that approaches playability at this resolution.
CPU Role
The AMD Ryzen 5 5500’s 6 cores and 12 threads provide the computational foundation for Steamworld Build’s simulation logic, which includes resource management, pathfinding, and building placement calculations. The CPU’s boost clock of 4.20 GHz and base clock of 3.60 GHz, combined with 16 MB of L3 cache, allow it to handle these background tasks without becoming the primary bottleneck in most scenarios. The measured FPS data supports this conclusion, as the frame rate scaling from 1080p to 4K follows GPU-bound patterns rather than CPU-bound ones.
The CPU’s benchmark scores show a strong multithreaded capability, with a Cinebench R23 multicore score of 16429 and a Geekbench multicore score of 7976. These results place the processor at the 73rd percentile among all CPUs, which is competitive with systems that are typically paired with midrange GPUs. The single-thread performance, measured at 2319 in Cinebench R23, is sufficient for the game’s main thread, which handles input processing and game state updates.
The 65W TDP and Zen 3 architecture on the AM4 socket mean that the CPU can sustain its boost clocks without thermal throttling, which is important for maintaining consistent frame rates during long play sessions. The memory bandwidth of 51.2 GB/s from dual-channel DDR4 is adequate for the game’s asset streaming, and the PCIe Gen 3 interface does not appear to limit the RTX 5060’s performance, as the GPU is connected via PCIe 5.0 x8 but the CPU’s Gen 3 support is backward compatible.
The CPU’s nearest rivals, including the AMD Ryzen AI 5 430 with a deltaPct of -0.1 and the Intel Core i5-12500 with a deltaPct of -0.4, have nearly identical average benchmark scores. This means that the choice of CPU among these models would not change the Steamworld Build experience, as the GPU remains the limiting component at all settings above Low. The CPU’s role becomes more apparent at 1080p Low, where 240 FPS is achieved, but even at this extreme, the 6-core/12-thread configuration provides enough headroom to avoid CPU-induced frame drops.
Hardware Specifications
AMD Ryzen 5 5500
NVIDIA GeForce RTX 5060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5060 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 81.0 |
| 3840x2160 | Medium | 62.0 |
| 3840x2160 | High | 46.0 |
| 3840x2160 | Ultra | 31.0 |
| 2560x1440 | Low | 153.0 |
| 2560x1440 | Medium | 117.0 |
| 2560x1440 | High | 88.0 |
| 2560x1440 | Ultra | 59.0 |
| 1920x1080 | Low | 240.0 |
| 1920x1080 | Medium | 184.0 |
| 1920x1080 | High | 138.0 |
| 1920x1080 | Ultra | 93.0 |
Steamworld Build with Ryzen 5 5500 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5060 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 5500 + RTX 5060
Explore FPS benchmarks for other games using this same hardware combination.