Barony

The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5060 combination delivers a robust experience in Barony, with frame rates that comfortably exceed standard display refresh rates across most configurations. The data shows a clear hierarchy where lower settings unlock very high performance, while the most demanding preset still maintains playable results at 4K. This analysis breaks down the measured performance, the role of each component, and how this pairing stacks up against other tested combinations.

Settings Recommendations

The measured rows provide a clear picture of the performance trade-offs across four presets at three resolutions. For the best balance of visual fidelity and smooth gameplay, the High preset is the standout recommendation. At 1920x1080, High produces an average of 231 FPS, which is more than sufficient for any high-refresh-rate display. Moving to 2560x1440, High still delivers a strong 146 FPS average, and even at 3840x2160, it maintains a playable 76 FPS. This preset offers a significant visual upgrade over Medium without the steep performance cost seen at Ultra.

The Medium preset is a viable alternative for users who prioritize higher frame rates over visual detail. It provides a 270 FPS average at 1080p and 170 FPS at 1440p, showing a 39 FPS and 24 FPS improvement over High, respectively. However, the gap narrows at 4K, where Medium averages 89 FPS compared to High's 76 FPS, a difference of only 13 FPS. Given that High likely provides a better visual experience for a modest FPS dip, it remains the more balanced choice.

The Ultra preset is demanding and should only be considered for users with very high refresh rate 1080p monitors. It yields 166 FPS at 1080p and 105 FPS at 1440p, but drops to 55 FPS at 4K. The 4K result is below the 60 FPS threshold often considered the baseline for smooth gameplay, making High the superior option for 4K displays. The Low preset delivers the highest frame rates, reaching 363 FPS at 1080p, but the graphical compromises are likely too severe for most users, making it suitable only for competitive play where maximum frame rate is the sole priority.

GPU Role

The NVIDIA GeForce RTX 5060 is the primary driver of frame rates in this pairing, particularly as resolution increases. The GPU features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 448.0 GB/s. In Barony, this memory configuration proves sufficient, as the data shows no significant bottlenecks or stutters even at 4K Ultra, where the average FPS drops to 55. The card's 19.18 TFLOPS of FP32 compute power and 299.6 GTexel/s texture rate are substantial, allowing it to handle the game's geometry and effects with ease. The boost clock of 2497 MHz ensures the GPU operates at high frequencies under load, contributing to the observed performance.

The GPU's role becomes more pronounced at higher resolutions. The performance delta between 1080p and 4K is substantial, indicating that the RTX 5060 is being pushed harder as pixel count increases. For instance, on High settings, the average FPS drops from 231 at 1080p to 76 at 4K, a reduction of 155 FPS. This shows the GPU is the limiting factor at 4K, where its raw throughput is challenged. Conversely, at 1080p, the high frame rates suggest the CPU has a more significant role in determining the final output, as the GPU is not fully saturated.

The GPU's 8 GB VRAM is a key consideration for future titles, but for Barony specifically, the measured data shows no issue. The card's performance is consistent with its benchmark scores, which place it in the 72nd percentile of all GPUs. Its nearest rivals include the AMD Radeon 860M and NVIDIA GeForce MX550, with deltaPct values of -0.3% and -0.3%, respectively, indicating the RTX 5060 performs essentially on par with these parts in synthetic tests. However, in real-world gaming, the RTX 5060's dedicated VRAM and higher power envelope likely provide advantages that are not fully captured by average benchmark scores.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals how the workload shifts between the CPU and GPU. At 1080p Low, the average FPS is 363, which is an extremely high number that suggests the CPU is the primary bottleneck, as the GPU has ample headroom to render frames quickly. As resolution increases to 1440p Low, the average drops to 229 FPS, and at 4K Low, it falls to 120 FPS. This scaling pattern indicates the GPU is becoming more involved, but the CPU still plays a significant role at these lower settings.

The trend changes when moving to higher settings. At Medium, the average FPS goes from 270 at 1080p to 170 at 1440p and then to 89 at 4K. The drop from 1440p to 4K is 81 FPS, which is a larger absolute decrease than the 100 FPS drop from 1080p to 1440p. This suggests that the GPU is becoming the dominant limiting factor as resolution and graphical load increase. The High preset shows a similar pattern, with averages of 231 FPS at 1080p, 146 FPS at 1440p, and 76 FPS at 4K. The scaling is relatively linear, with each resolution step roughly halving the frame rate, which is typical for a GPU-bound scenario.

At Ultra, the scaling is even more pronounced. The average FPS falls from 166 at 1080p to 105 at 1440p, and then to 55 at 4K. The 4K result is less than half of the 1080p result, confirming that the RTX 5060 is fully saturated at this resolution and settings combination. The data clearly shows that the CPU is the limiting factor at 1080p, especially on Low settings, while the GPU takes over as the primary constraint at 4K and at higher graphical presets. This is a classic balance point for a mid-range CPU paired with a mainstream GPU.

FAQ

Q: What is the best resolution and settings combination for a 60 Hz display?

A: For a 60 Hz display, all tested settings at 1080p and 1440p provide average FPS well above 60, including Ultra at 1440p with 105 FPS. Even 4K High, with an average of 76 FPS, is sufficient for a 60 Hz monitor.

Q: Can this combo achieve 240 FPS at 1080p?

A: Yes, the data shows that the Low preset achieves an average of 363 FPS at 1920x1080, and the Medium preset achieves 270 FPS. The High preset falls just short at 231 FPS, while Ultra is below the target at 166 FPS.

Q: How does the RTX 5060 compare to its nearest rivals in benchmark scores?

A: The RTX 5060 has an average benchmark score of 26331. Its nearest rivals are the AMD Radeon 860M at 26401 and the NVIDIA GeForce MX550 at 26421, with deltaPct values of -0.3% for both. This indicates the RTX 5060 performs virtually identically to these parts in synthetic tests.

Q: Is the Ryzen 5 5500 a bottleneck at 4K?

A: The data suggests the GPU is the primary bottleneck at 4K. The average FPS at 4K High is 76, and at 4K Ultra it is 55. These numbers are likely limited by the GPU's compute and memory bandwidth, not the CPU's 6 cores and 12 threads.

Q: What is the frame time consistency at 1440p Medium?

A: The measured data for 1440p Medium shows an average FPS of 170, with a minimum of 145 FPS and a maximum of 196 FPS. This indicates a relatively consistent frame delivery, with the minimum being only 25 FPS below the average.

*Q: How does this combo rank among all tested systems for Barony?*

A: This specific CPU and GPU combination is ranked 1637 out of 3717 tested combos for Barony. This places it in the top 44% of all tested systems, indicating a solid mid-range performance level.

CPU Role

The AMD Ryzen 5 5500 is a 6-core, 12-thread processor based on the Zen 3 architecture, running on the AMD Socket AM4 platform. It has a base clock of 3.60 GHz and a boost clock of 4.20 GHz, with a 16 MB L3 cache. In Barony, this CPU provides ample processing power to keep up with the GPU at lower resolutions. The data shows that at 1080p Low, the system achieves 363 FPS, a number that is heavily dependent on CPU capability. This suggests the Ryzen 5 5500 is capable of feeding frames to the GPU at a very high rate without becoming a limiting factor.

The CPU's benchmark scores support its strong gaming performance. It achieves a Cinebench R23 multicore score of 16429 and a single-core score of 2319. The multithreaded performance is particularly relevant for modern games, and the 12 threads ensure that background tasks and game logic are handled smoothly. The processor's 3DMark scores, such as 5386 in the 16-thread test and 836 in the single-thread test, indicate a balanced performance profile. Its average benchmark score of 19593 places it in the 73rd percentile of all CPUs, showing it is a capable mid-range part.

The CPU's role diminishes as resolution increases. At 4K, the frame rates are significantly lower, indicating that the GPU is the bottleneck. However, the CPU still needs to maintain minimum frame rates, and the data shows no significant dips. The minimum FPS recorded at 1440p Medium is 145, which is a high value that indicates the CPU can sustain a consistent frame delivery. Compared to its nearest rivals, the Ryzen 5 5500 has a deltaPct of -0.1% versus the AMD Ryzen AI 5 430 and -0.4% versus the Intel Core i5-12500, showing it is essentially on par with these alternatives in average benchmark scores.

Measured FPS Breakdown

The following data represents the exact measured frame rates for this combo in Barony.

At 1920x1080, the performance is extensive. The Low preset achieves an average of 363 FPS. Moving to Medium, the average is 270 FPS, with a minimum of 229 FPS and a maximum of 310 FPS. The High preset delivers an average of 231 FPS, and the Ultra preset produces an average of 166 FPS. This shows a clear progression, with each higher setting reducing the frame rate by a significant margin.

At 2560x1440, the frame rates remain high. The Low preset averages 229 FPS. The Medium preset averages 170 FPS, with a minimum of 145 FPS and a maximum of 196 FPS. The High preset delivers an average of 146 FPS, and the Ultra preset brings the average down to 105 FPS. These numbers indicate that 1440p is a sweet spot for this combo, offering high frame rates across all settings.

At 3840x2160, the GPU is pushed harder. The Low preset achieves an average of 120 FPS. The Medium preset averages 89 FPS, with a minimum of 76 FPS and a maximum of 102 FPS. The High preset delivers an average of 76 FPS, and the Ultra preset drops to an average of 55 FPS. These results show that 4K is playable on High settings, but Ultra is only suitable for users who prioritize visual quality over frame rate.

How This Combo Ranks

In the global database of tested hardware combinations for Barony, this pairing of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5060 is ranked 1637 out of 3717 combos. This places it in the upper half of all tested systems, specifically in the 44th percentile. The rank reflects the balanced performance of the CPU and GPU, which together deliver high frame rates at 1080p and 1440p, while remaining capable at 4K.

The ranking indicates that there are 1636 other combinations that perform better in this game, likely featuring higher-end CPUs or GPUs. However, the data shows that this combo is not far behind the top performers in terms of playable experience. The high frame rates at 1080p, exceeding 230 FPS on High settings, are comparable to what many higher-tier systems would achieve. The 4K performance, while not top-tier, is still playable, which is a notable achievement for a mid-range pairing.

The combo's rank is consistent with the individual component percentiles. The CPU is in the 73rd percentile of all CPUs, and the GPU is in the 72nd percentile of all GPUs. The fact that the combined system ranks in the 44th percentile for this specific game suggests that Barony is not excessively demanding on either component, allowing this mid-range pairing to perform relatively better than its individual component rankings might suggest. This is a positive indicator for users with this hardware, as it shows the system is well-balanced for this title.