Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
86
good

This combination provides smooth gameplay with an average of 86 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 51 59 79
1440p QHD 57 74 93 120
1080p Full HD 74 101 125 157

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 79
3840x2160 Medium 59
3840x2160 High 51
3840x2160 Ultra 39
2560x1440 Low 120
2560x1440 Medium 93
2560x1440 High 74
2560x1440 Ultra 57
1920x1080 Low 157
1920x1080 Medium 125
1920x1080 High 101
1920x1080 Ultra 74

Red Dead Redemption 2 with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5070, In-Depth Analysis

The data for Red Dead Redemption 2 with the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5070 shows a configuration that scales predictably with resolution, though the performance deltas between settings tiers reveal where the bottleneck shifts. This pairing, ranking 366th out of 1687 tested combinations, delivers playable frame rates across all tested resolutions, but the gap between Low and Ultra presets expands dramatically as pixel count increases, indicating a system that is increasingly GPU-bound at higher fidelity levels.

Resolution Scaling

The measured FPS data shows a clear and consistent scaling pattern from 1080p to 4K. At 1080p with High settings, the system produces 100.5 FPS, which drops to 73.5 FPS at 1440p, and further to 51.4 FPS at 4K. This represents a 49% reduction in frame rate from 1080p to 4K at High settings, a substantial hit that aligns with the quadrupling of pixel count. The scaling is not linear, however; the 1440p to 4K transition (a 2.25x pixel increase) costs roughly 30% of the frame rate, while the 1080p to 1440p transition (also 2.25x pixel increase) costs roughly 27%. This slight acceleration in performance loss at higher resolutions suggests the RTX 5070’s memory bandwidth and compute resources are being taxed more heavily as resolution climbs.

Looking at the Low preset, the pattern is more pronounced. At 1080p Low, the system hits 157 FPS, dropping to 119.8 FPS at 1440p and 78.8 FPS at 4K. The 1080p to 4K drop here is 50%, nearly identical to High, but the absolute frame rates are much higher, indicating that the GPU has ample headroom when graphical effects are minimized. The Medium preset shows a similar relative decline: 125.3 FPS at 1080p, 92.9 FPS at 1440p, and 58.6 FPS at 4K, a 53% reduction from 1080p to 4K. Ultra is the steepest, starting at 74.3 FPS at 1080p, falling to 57 FPS at 1440p, and bottoming out at 38.9 FPS at 4K — a 48% drop overall.

The fact that the percentage drop from 1080p to 4K is relatively consistent (48-53%) across all presets suggests that the limiting component is the GPU’s rendering pipeline rather than the CPU or memory subsystem. If the Ryzen 5 4600G were the bottleneck, we would expect the 1080p numbers to plateau or show erratic scaling, but instead they scale smoothly with resolution. The 4K Ultra result of 38.9 FPS is the only sub-40 FPS figure in the entire dataset, reinforcing that this is a GPU-limited scenario at the highest fidelity and resolution combination.

GPU Role

The NVIDIA GeForce RTX 5070 is the clear driver of these results, and its specifications explain the scaling behavior. With 12 GB of GDDR7 memory on a 192-bit bus, the card provides 672.0 GB/s of bandwidth, which is substantial for a 2018 title like Red Dead Redemption 2. The memory clock runs at 1750 MHz, translating to 28 Gbps effective, and the GPU’s boost clock is 2512 MHz with a base of 2325 MHz. These clock speeds, combined with 6144 shading units and 80 ROPs, deliver a pixel rate of 201.0 GPixel/s and a texture rate of 482.3 GTexel/s.

The GPU’s FP32 throughput of 30.87 TFLOPS is more than sufficient for this game’s DirectX 12 rendering path, and the card’s 48 RT cores and 192 tensor cores are largely irrelevant for Red Dead Redemption 2, which does not heavily utilize ray tracing. The passmark G3D score of 29137 and the 3DMark Steel Nomad DX12 score of 5077 place this GPU in the 83rd percentile of all GPUs, and its nearest rival is the AMD Radeon Pro 5300 with a delta of 0.2%, indicating near-parity with that workstation card. Interestingly, the RTX 3090 is also close, with a delta of 0.6%, suggesting the 5070’s raw compute is competitive with a previous-generation flagship.

In practice, the GPU’s role is most evident in the 4K results. The gap between 4K Low (78.8 FPS) and 4K High (51.4 FPS) is 27.4 FPS, while the gap between 4K High and 4K Ultra (38.9 FPS) is 12.5 FPS. This non-linear degradation suggests that the Ultra preset introduces effects that disproportionately tax the GPU’s memory bandwidth and shading units. The 12 GB VRAM capacity is likely sufficient for this game at all tested settings, as Red Dead Redemption 2’s texture requirements are manageable at 4K; the bottleneck is more likely the raw compute and fill rate rather than memory capacity.

Settings Recommendations

Based on the measured rows, the optimal experience depends on the target resolution and frame rate preference. At 1080p, the High preset delivers 100.5 FPS, which is smooth for most displays, while Medium offers 125.3 FPS and Low reaches 157 FPS. The Ultra preset at 1080p yields 74.3 FPS, which is playable but represents a 26% drop from High for what is likely a marginal visual gain in this title. For 1080p users prioritizing high refresh rates, Medium or High are the sweet spots, as they both stay above 100 FPS.

At 1440p, the choice becomes more critical. High settings produce 73.5 FPS, which is adequate for 60 Hz displays but not for 120 Hz+ panels. Medium at 92.9 FPS is the best balance, offering a 26% improvement over High while presumably retaining most of the visual fidelity. Low at 119.8 FPS is the only preset that approaches high-refresh territory, but it sacrifices significant visual quality. Ultra at 57 FPS is just below the 60 FPS threshold and is not recommended for smooth gameplay.

For 4K, the data is more constrained. High settings yield 51.4 FPS, which is below the 60 FPS target but playable on VRR displays. Medium at 58.6 FPS is close to 60 FPS and represents the best compromise between visual quality and performance. Low at 78.8 FPS is the only preset that comfortably exceeds 60 FPS, but it strips away many of the graphical features that make the game visually impressive. Ultra at 38.9 FPS is not recommended for any scenario, as the frame rate dip is substantial and the visual uplift over High is typically modest in this game. The data suggests that Medium is the recommended preset for 4K, High for 1440p, and High or Medium for 1080p depending on refresh rate priorities.

FAQ

Q: What is the best resolution for this CPU-GPU combo?

A: The data shows that 1440p Medium (92.9 FPS) and 1080p High (100.5 FPS) provide the best balance of fidelity and frame rate. At 4K, even Medium only reaches 58.6 FPS, which is below the 60 FPS threshold.

Q: How much performance is lost when moving from 1080p to 4K?

A: At High settings, the frame rate drops from 100.5 FPS at 1080p to 51.4 FPS at 4K, a reduction of approximately 49%. This is consistent across presets, with Low dropping from 157 FPS to 78.8 FPS (50% loss) and Medium from 125.3 FPS to 58.6 FPS (53% loss).

Q: Is the RTX 5070 strong enough for 4K gaming in this title?

A: At 4K, the GPU delivers 78.8 FPS on Low, 58.6 FPS on Medium, and 51.4 FPS on High. This indicates the card can handle 4K, but only at Medium settings or lower to maintain playable frame rates above 55 FPS.

Q: How does the Ryzen 5 4600G affect performance in this game?

A: The CPU’s 6 cores and 12 threads with a boost clock of 4.20 GHz appear sufficient, as frame rates scale smoothly with resolution. The Cinebench R23 multicore score of 13593 and single-core score of 1919 suggest the CPU is not the limiting factor at any tested setting.

Q: What is the performance gap between Ultra and Low presets?

A: At 1080p, Ultra (74.3 FPS) is 52.7% slower than Low (157 FPS). At 1440p, the gap is 52.4% (57 FPS vs 119.8 FPS), and at 4K, it is 50.6% (38.9 FPS vs 78.8 FPS). The relative penalty is consistent across resolutions.

Q: How does this GPU compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5070’s average benchmark score of 41687 places it 0.2% ahead of the AMD Radeon Pro 5300 and 0.6% ahead of the NVIDIA GeForce RTX 3090, while being 0.5% behind the NVIDIA Tesla M40. This indicates near-identical synthetic performance to these cards.

CPU Role

The AMD Ryzen 5 4600G plays a supporting but critical role in this configuration. With 6 cores and 12 threads based on the Zen 2 architecture (Renoir codename), the CPU runs at a base clock of 3.70 GHz and boosts to 4.20 GHz. This 4000-series processor, manufactured on TSMC’s 7 nm process, features an 8 MB shared L3 cache and dual-channel DDR4 memory support with a bandwidth of 51.2 GB/s. The CPU’s 65 W TDP and PCIe Gen 3 interface are modest by modern standards, but they are sufficient for this 2018 title.

The benchmark data for the 4600G shows it is a mid-range performer. The Cinebench R23 multicore score of 13593 and single-core score of 1919 place it in the 75th percentile of all CPUs, with an average benchmark score of 17489. Its nearest rival is the AMD Ryzen 3 PRO 5355GE with a delta of 0%, indicating essentially identical performance, while the Intel Core i3-14100T is 0.8% faster and the Core i3-13100F is 1% faster. The 3DMark single-thread score of 726 and max-thread score of 4889 suggest that the CPU’s single-thread performance is adequate for Red Dead Redemption 2’s engine, which typically relies on a few heavily loaded threads.

In the context of this game, the CPU’s role is most evident at 1080p Low, where the GPU is not heavily taxed. The 157 FPS result at 1080p Low indicates the CPU can feed the GPU fast enough to hit high frame rates, but it is unclear if the CPU is the ceiling at this point. The fact that 4K Low (78.8 FPS) is exactly half of 1080p Low (157 FPS) suggests a purely GPU-bound scenario at 4K, while the 1080p result may be partially CPU-limited. The CPU’s 12 threads are likely sufficient for Red Dead Redemption 2’s multi-threaded rendering tasks, and the 8 MB L3 cache is adequate for the game’s working set. The Geekbench multicore score of 6093 and single-core score of 1575 reinforce that this CPU is not a bottleneck for the RTX 5070 at 1440p or 4K, but at 1080p with lower settings, the CPU’s single-thread performance could be the limiting factor, which is consistent with the observed scaling pattern.

Hardware Specifications

AMD Ryzen 5 4600G

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5070

VRAM 12 GB GDDR7
Base Clock —
Boost Clock 2512 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5070 in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 78.8
3840x2160 Medium 58.6
3840x2160 High 51.4
3840x2160 Ultra 38.9
2560x1440 Low 119.8
2560x1440 Medium 92.9
2560x1440 High 73.5
2560x1440 Ultra 57.0
1920x1080 Low 157.0
1920x1080 Medium 125.3
1920x1080 High 100.5
1920x1080 Ultra 74.3

Red Dead Redemption 2 with Ryzen 5 4600G + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 5070 + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with Ryzen 5 4600G + RTX 5070

Explore FPS benchmarks for other games using this same hardware combination.