Ready Or Not

Ready Or Not is a tactical shooter, and this entry covers a measured AMD Ryzen 7 5700X plus Intel Arc B580 combination. The measured frame rates range from a high of 215.6 FPS at 1920x1080 Low to a low of 38.6 FPS at 3840x2160 Ultra. The combo ranks 1379 out of 1748 tested pairs in this title. The CPU's average benchmark score is 26214, which places it at the 83rd percentile, and the GPU's average benchmark score is 23021, at the 66th percentile. These numbers frame how the pair behaves specifically in Ready Or Not.

Resolution Scaling

Resolution scaling is the most informative part of this dataset. The FPS drops are steady and large at every preset step. On Low, the average goes 215.6 -> 133.8 -> 72.1 across 1080p, 1440p, and 4K. On Medium, it goes 191 -> 118.3 -> 64.5. On High, 170 -> 105.4 -> 55.4. On Ultra, 121 -> 75.3 -> 38.6. The same downward pattern repeats four times, which is a clear sign that the Intel Arc B580 is the main performance limiter as resolution increases. If the CPU were the bottleneck, the frame rate would be similar at 1080p and 1440p because the CPU work would stay about the same; instead, every added resolution tier removes a large amount of FPS. At 4K Ultra, the result drops to 38.6, the weakest measured value in the set. At the opposite end, 1080p Low reaches 215.6, meaning the CPU and GPU together have enough headroom for very high frame rates in low-load scenes. The practical reading is that this pairing scales like a GPU-limited system: stronger at low resolutions and lighter presets, and increasingly taxed as pixel count and settings rise.

FAQ

Q: What average FPS does this combo produce at 1080p?

A: At 1920x1080, the measured averages are 215.6 on Low, 191 on Medium, 170 on High, and 121 on Ultra. All four settings stay at or above the 121 FPS figure at this resolution.

Q: How does it hold up at 1440p?

A: At 2560x1440, the averages are 133.8 on Low, 118.3 on Medium, 105.4 on High, and 75.3 on Ultra. The largest drop from 1080p is on Low, which falls from 215.6 to 133.8, but the 1440p Ultra number remains above the 4K Ultra figure.

Q: Can it run 4K?

A: At 3840x2160, the averages are 72.1 on Low, 64.5 on Medium, 55.4 on High, and 38.6 on Ultra. This dataset does not include minimum FPS, so the averages cannot guarantee smooth frame pacing, but the two lighter presets clearly keep the average higher than the two heavier presets.

Q: How does the CPU compare with its nearest rivals?

A: The Ryzen 7 5700X has an average benchmark score of 26214. Its nearest rivals are the Intel Core i9-11900KF at 26196 with a deltaPct of 0.1, the AMD Ryzen 7 PRO 6850U at 26262 with a deltaPct of -0.2, the AMD Ryzen 5 5500GT at 26161 with a deltaPct of 0.2, and the AMD Ryzen 5 7600X at 26272 with a deltaPct of -0.2. The spread between these scores is narrow.

Q: How does the GPU compare with its nearest rivals?

A: The Intel Arc B580 has an average benchmark score of 23021. Its nearest rivals are the AMD Radeon 760M at 22999 with a deltaPct of 0.1, the NVIDIA P106-100 at 22950 with a deltaPct of 0.3, the NVIDIA GeForce RTX 4060 at 23181 with a deltaPct of -0.7, and the NVIDIA GeForce RTX 4060 Mobile at 22729 with a deltaPct of 1.3.

Q: Does the dataset include frame-time data?

A: No. The measured FPS records include only average FPS; minimum and maximum FPS are null for all resolutions and settings. This limits conclusions about stutter and frame-time consistency.

CPU Role

The AMD Ryzen 7 5700X is a Zen 3 (Vermeer) desktop processor on Socket AM4. It has 8 cores and 16 threads, a 3.40 GHz base clock and a 4.60 GHz boost clock, 32 MB of shared L3 cache, and dual-channel DDR4 memory support with 51.2 GB/s bandwidth. It is fabricated on TSMC's 7 nm process and has a 65 W TDP. In synthetic benchmarks, the chip scores 22620 in Cinebench R23 multicore, 3193 in Cinebench R23 single-core, 9720 in Geekbench multicore, 2148 in Geekbench single-core, 6858 in 3DMark 16-thread, and 921 in 3DMark single-thread. These scores put the CPU at the 83rd percentile among all CPUs in the database.

For Ready Or Not, the CPU's relevance shows up in the 1080p numbers. At 1080p Low, the combined system reaches 215.6 FPS. That is the highest measured average in the entire set, and it indicates that the 5700X has the threads and boost clock to avoid bottlenecking the Arc B580 at a resolution where the GPU has the least work. The 4.60 GHz boost clock helps keep the highest 1080p averages in this dataset. The 1080p High result of 170 FPS and the 1080p Ultra result of 121 FPS both suggest that the 8-core/16-thread configuration is adequate for this game's high-refresh range. At 4K, the CPU becomes less relevant because the frame rate is constrained by the GPU; the 4K results are all below the corresponding 1080p results by a wide margin.

How This Combo Ranks

In the Ready Or Not-specific combo ranking, this CPU/GPU pair is placed 1379th out of 1748 tested combinations. That is a low relative position, meaning most other pairs in this database post better results in this game. It also means the measured FPS above should not be read as proof that the pair is anywhere near the top of the leaderboard; the rank simply reflects all tested hardware combinations. The individual components sit at the 83rd percentile for the CPU and the 66th percentile for the GPU, yet the combo rank does not map directly to either percentile. Benchmark results indicate that Ready Or Not's particular demands do not match this pairing as well as they match other combinations higher up the list. For a builder choosing this exact hardware, the practical message is that it is a mid-pack combination in this game, with the measured data at 1080p and 1440p being more useful than the overall rank.

GPU Role

The Intel Arc B580 uses the Xe2-HPG Battlemage architecture and is built on TSMC's 5 nm node with 19,600 million transistors. The GPU has 2560 shading units, 160 TMUs, 80 ROPs, and 20 ray tracing cores. Clock speeds are fixed at 2670 MHz for base and boost, with memory at 2375 MHz, listed as 19 Gbps effective. The card carries 12 GB GDDR6 on a 192-bit bus, producing 456.0 GB/s of bandwidth. It delivers 13.67 TFLOPS of FP32 compute, supports PCIe 4.0 x8, and carries a 190 W TDP with a suggested 450 W PSU. In synthetic tests it scores 3068 in 3DMark Steel Nomad DX12, 92821 in Geekbench OpenCL, 109672 in Geekbench Vulkan, and 15748 in Passmark G3D. Those results place it at the 66th percentile among all GPUs.

In Ready Or Not, the B580's influence is clear in the settings scaling. The GPU is capable of 191 FPS at 1080p Medium and 118.3 FPS at 1440p Medium, but 4K Medium drops to 64.5. The 1440p results occur with 12 GB GDDR6 and 456.0 GB/s bandwidth in play. The measured 4K High figure of 55.4 and 4K Ultra figure of 38.6 show the card under heavy load at the highest quality settings. The B580's nearest rival in synthetic score, the NVIDIA GeForce RTX 4060, sits at 23181 with a deltaPct of -0.7, so the two cards are close in average benchmark performance; in this game, the B580's measured averages are the more relevant data.

Measured FPS Breakdown

Below are the exact average FPS values from the measuredFps dataset. No minimum or maximum values were recorded.

| Resolution | Settings | Average FPS |

| 1920x1080 | Low | 215.6 |

| 1920x1080 | Medium | 191 |

| 1920x1080 | High | 170 |

| 1920x1080 | Ultra | 121 |

| 2560x1440 | Low | 133.8 |

| 2560x1440 | Medium | 118.3 |

| 2560x1440 | High | 105.4 |

| 2560x1440 | Ultra | 75.3 |

| 3840x2160 | Low | 72.1 |

| 3840x2160 | Medium | 64.5 |

| 3840x2160 | High | 55.4 |

| 3840x2160 | Ultra | 38.6 |

The 1080p results are the strongest in the set. The lowest 1080p preset, Ultra, still averages 121 FPS. The 1440p results are also solid, with the lowest preset at 75.3 FPS on Ultra. The 4K results are mixed: Low and Medium land at 72.1 and 64.5, while High and Ultra fall to 55.4 and 38.6. The difference between 1080p Low at 215.6 and 4K Ultra at 38.6 defines the operating range of this combination.

For practical use, the measured data points to 1080p and 1440p as the comfortable domain. At 4K, the Low and Medium presets remain average-friendly, while High and Ultra require accepting a much lower frame rate. Because the dataset has no minimum FPS, the averages do not capture occasional dips, so a builder should treat the 4K High and Ultra numbers with some caution when choosing a target refresh rate.