Pc Building Simulator

# Pc Building Simulator with Intel Core Ultra 7 270K Plus + NVIDIA GeForce RTX 5050

Pc Building Simulator, a simulation title from 2019, presents a unique performance profile when paired with the Intel Core Ultra 7 270K Plus and NVIDIA GeForce RTX 5050. The measured data reveals a system that is heavily GPU-bound at higher resolutions, yet demonstrates significant headroom at 1080p. This combination ranks 1814th out of 3002 tested combos in this game, placing it in the lower-middle tier of the database. The following analysis breaks down resolution scaling, CPU and GPU roles, and optimal settings based strictly on the measured FPS rows.

Resolution Scaling

The resolution scaling behavior of this combo in Pc Building Simulator is telling. At 1920x1080 with Low settings, the system produces 237 FPS. Moving to 2560x1440 Low drops the average to 149 FPS, a reduction of 88 FPS or approximately 37%. Continuing to 3840x2160 Low yields 78 FPS, another 71 FPS decline from 1440p. The scaling from 1080p to 4K at Low settings represents a 159 FPS drop, or roughly 67% lower performance. This steep decline indicates that the RTX 5050's rendering throughput is the limiting factor as pixel count rises.

At Medium settings, the pattern persists but with different magnitudes. The 1080p Medium average of 168 FPS falls to 106 FPS at 1440p, a 62 FPS decrease. The 4K Medium average of 55 FPS represents a 51 FPS drop from 1440p, with a minimum of 47 FPS and maximum of 64 FPS recorded. The gap between 1080p and 4K Medium is 113 FPS, or 67% lower. This consistent proportional decline across settings suggests the GPU's fill rate and memory bandwidth are the primary constraints.

High settings show a similar trend: 118 FPS at 1080p, 75 FPS at 1440p, and 39 FPS at 4K. The 1080p-to-4K drop of 79 FPS (67%) mirrors the Low and Medium scaling almost exactly. Ultra settings produce 113 FPS at 1080p, 71 FPS at 1440p, and 37 FPS at 4K, with a 76 FPS decline from 1080p to 4K. The uniformity of these percentage drops—consistently around 67% from 1080p to 4K across all settings—strongly indicates that the limiting component is the GPU rather than the CPU. If the CPU were bottlenecking, the scaling from 1440p to 4K would show a smaller percentage drop as the GPU load increases, but here the declines remain proportional.

The 4K results are particularly revealing. At Ultra settings, the average FPS of 37 is barely above the 4K High average of 39 FPS, suggesting the game's Ultra preset introduces additional GPU work that the RTX 5050 cannot absorb at this resolution. The 4K Low result of 78 FPS shows that even at the lowest settings, the GPU cannot approach the 1440p Low figure of 149 FPS, reinforcing that pixel throughput is the hard ceiling.

FAQ

Q: What is the highest average FPS achievable with this combo in Pc Building Simulator?

A: The highest measured average FPS is 237, achieved at 1920x1080 with Low settings. This represents the peak performance of the Intel Core Ultra 7 270K Plus and NVIDIA GeForce RTX 5050 combination in this title.

Q: How does the RTX 5050's 8 GB VRAM affect 4K performance?

A: At 3840x2160, the RTX 5050 with 8 GB of GDDR6 memory produces averages ranging from 37 FPS (Ultra) to 78 FPS (Low). The 320.0 GB/s memory bandwidth and 128-bit bus width appear insufficient for smooth 4K gameplay, as even Low settings only reach 78 FPS, and Ultra dips to 37 FPS.

Q: Is this CPU or GPU limited in Pc Building Simulator?

A: The data strongly indicates GPU limitation. The consistent ~67% FPS drop from 1080p to 4K across all settings, combined with the CPU's high compute scores (44253 in Cinebench R23 multi-core), shows the RTX 5050 is the bottleneck. The CPU's 24 cores and 5.50 GHz boost clock provide ample headroom.

Q: What settings provide the most balanced experience at 2560x1440?

A: At 2560x1440, Medium settings deliver 106 FPS average with a minimum of 90 FPS and maximum of 122 FPS. This offers a smooth experience while maintaining visual quality. High settings at 75 FPS are also playable, but Medium provides a better safety margin above 60 FPS.

Q: How does the RTX 5050 compare to its nearest GPU rivals in synthetic benchmarks?

A: The RTX 5050's average benchmark score of 21035 places it 0.6% below the AMD Radeon RX Vega M GL (21153) and 1.6% below the AMD Radeon RX 5600 XT (20713). It is 1% above the AMD Radeon HD 8970M (21237) and 1.6% above the NVIDIA RTX A4000 Mobile (21379).

Q: Can this combo maintain 60 FPS at 4K in this game?

A: No. The highest 4K average is 78 FPS at Low settings, but Medium drops to 55 FPS, High to 39 FPS, and Ultra to 37 FPS. Only Low settings at 4K exceed 60 FPS, and no settings above Low achieve this threshold.

CPU Role

The Intel Core Ultra 7 270K Plus brings substantial processing power to this simulation title. With 24 cores and 24 threads, the CPU offers massive parallel throughput, reflected in its Cinebench R23 multi-core score of 44253 and PassMark multithread score of 68574. The single-thread performance is equally strong, with a Cinebench R23 single-core score of 2439 and a PassMark single-thread score of 5068. The base clock of 3.70 GHz boosts up to 5.50 GHz, providing excellent responsiveness for the simulation logic that Pc Building Simulator runs.

The CPU's 96th percentile ranking against all CPUs and its average benchmark score of 93785 place it in the upper echelon of processors. Its nearest rivals in synthetic benchmarks include the Intel Xeon 6520P (93786, 0% delta) and AMD EPYC 4564P (95183, -1.5% delta), showing it trades blows with enterprise-class silicon. The 36 MB of shared L3 cache and 115.2 GB/s memory bandwidth with DDR5 support further bolster its capability.

However, the measured FPS data reveals that this CPU power is largely untapped in Pc Building Simulator. The consistent FPS drops across resolutions—regardless of settings—indicate that the game's rendering workload does not stress the CPU's capabilities. Even at 1080p Low with 237 FPS, the CPU is not the limiting factor; the RTX 5050's output at higher resolutions caps performance. The 24-core configuration excels in multi-threaded workloads like the PassMark data compression score of 804322, but Pc Building Simulator's frame generation appears to rely more on GPU throughput.

The CPU's integrated Arc Xe-LPG Graphics 64EU is irrelevant for this discrete GPU configuration but demonstrates the chip's versatility. The 125 W TDP and Socket 1851 compatibility position it as a desktop-focused part, with the unlocked multiplier allowing overclocking headroom. The 3 nm process node and 17,800 million transistors on a 243 mm² die show modern manufacturing efficiency, but these attributes do not translate into FPS gains in this specific game.

Settings Recommendations

The measured FPS data provides clear guidance for optimal settings across resolutions. At 1920x1080, all settings exceed 113 FPS, making the choice purely about visual preference. Ultra settings at 113 FPS still provide a smooth experience, so players with 1080p displays should select Ultra for the best visual fidelity without sacrificing performance. The 237 FPS at Low and 168 FPS at Medium show that the RTX 5050 can handle high refresh rates, but Ultra's 113 FPS is more than sufficient for standard 60 Hz monitors and even 144 Hz displays.

At 2560x1440, Medium settings at 106 FPS offer the best balance. The minimum of 90 FPS ensures minimal stutter, while the 122 FPS maximum provides headroom. High settings at 75 FPS are playable but leave less margin for demanding scenes. Ultra at 71 FPS is technically above 60 FPS but close to the threshold, making Medium the safer recommendation for consistent performance. Low settings at 149 FPS are unnecessary unless chasing maximum refresh rates.

At 3840x2160, the situation is more constrained. Low settings at 78 FPS are the only option above 60 FPS, but this preset sacrifices visual quality. Medium at 55 FPS with a 47 FPS minimum will experience noticeable dips below 60 FPS. High and Ultra at 39 FPS and 37 FPS respectively are not recommended for smooth gameplay. For 4K users, Low settings are the only viable choice, though the visual trade-off may be significant for a simulation game where readability matters.

The overall recommendation is to prioritize 1080p or 1440p gaming with this combo. At 1080p, Ultra settings provide the best experience across all measured rows. At 1440p, Medium offers the best compromise between visual quality and frame stability. 4K gaming is only feasible at Low settings, and even then, the 78 FPS average leaves limited headroom.

How This Combo Ranks

The Intel Core Ultra 7 270K Plus and NVIDIA GeForce RTX 5050 combination ranks 1814th out of 3002 tested combos in Pc Building Simulator. This places it in the 60th percentile of all tested configurations, meaning roughly 40% of combos perform better. The rank reflects the GPU's limitations, as the CPU alone would rank much higher given its 96th percentile standing among all CPUs.

The RTX 5050's percentile rank of 66 among all GPUs, with an average benchmark score of 21035, explains the combo's mid-tier position. Its nearest GPU rivals—the AMD Radeon RX Vega M GL at 21153 (0.6% faster), AMD Radeon HD 8970M at 21237 (1% faster), and AMD Radeon RX 5600 XT at 20713 (1.6% slower)—all fall within a narrow performance band. This tight clustering suggests the RTX 5050 is positioned at a specific performance tier that limits its ability to drive demanding titles at high resolutions.

The combo's rank of 1814 is consistent with the measured FPS data. While the CPU provides excellent synthetic benchmark scores, the game's performance is dictated by the GPU. The 8 GB VRAM and 128-bit memory bus of the RTX 5050 are adequate for 1080p and 1440p gaming but insufficient for 4K at high settings. This is reflected in the FPS results, where 4K Ultra averages only 37 FPS.

The gap between the CPU's high percentile (96) and the combo's lower rank (60th percentile) highlights the imbalance. A stronger GPU would likely move this combo significantly higher in the rankings, as the CPU has demonstrated it is not the bottleneck. The 3002 tested combos include configurations with faster GPUs, which would naturally outperform this pairing at higher resolutions.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across all resolution and settings combinations. At 1920x1080, the results are as follows: Low settings produce an average of 237 FPS, Medium produces 168 FPS with a minimum of 142 and maximum of 193, High produces 118 FPS, and Ultra produces 113 FPS. The spread from Low to Ultra is 124 FPS, showing that settings have a substantial impact at this resolution.

At 2560x1440, Low settings average 149 FPS, Medium averages 106 FPS with a minimum of 90 and maximum of 122, High averages 75 FPS, and Ultra averages 71 FPS. The spread narrows to 78 FPS from Low to Ultra, indicating that the GPU's limits begin to compress the differences between settings. The Medium settings' minimum of 90 FPS ensures smooth gameplay, while High and Ultra hover near the 60-75 FPS range.

At 3840x2160, Low settings average 78 FPS, Medium averages 55 FPS with a minimum of 47 and maximum of 64, High averages 39 FPS, and Ultra averages 37 FPS. The spread from Low to Ultra is 41 FPS, the smallest of any resolution. The Medium minimum of 47 FPS and maximum of 64 FPS show significant variance, while High and Ultra are nearly identical at 39 FPS and 37 FPS respectively, suggesting the GPU is saturated.

The data shows that the RTX 5050's performance scales predictably with resolution but less so with settings at higher resolutions. At 1080p, the difference between Low and Ultra is 124 FPS, demonstrating the GPU has headroom to handle increased settings. At 4K, the difference is only 41 FPS, indicating the GPU is fully utilized even at Low settings and cannot differentiate much between presets.

GPU Role

The NVIDIA GeForce RTX 5050 is the primary determinant of performance in Pc Building Simulator for this combo. Its 8 GB of GDDR6 memory on a 128-bit bus provides 320.0 GB/s of bandwidth, which proves adequate for 1080p and 1440p but insufficient for 4K at higher settings. The base clock of 2317 MHz boosts to 2572 MHz, and the 2560 shading units process geometry and pixels at a rate of 82.30 GPixel/s pixel fill rate and 205.8 GTexel/s texture rate.

The GPU's synthetic benchmarks show a mixed profile. The 3DMark Steel Nomad DX12 score of 2502 and PassMark G3D score of 17326 place it in a mid-tier position, while its PassMark G2D score of 1113 and DirectX 9 score of 186 indicate modest 2D and legacy performance. The Geekbench OpenCL score of 90334 and Vulkan score of 89381 suggest competent compute capabilities, but these do not directly translate to gaming FPS.

The RTX 5050's 66th percentile ranking among all GPUs, with an average benchmark score of 21035, aligns with the measured gaming performance. Its nearest rivals—all within 1.6% in either direction—confirm it sits in a competitive but not exceptional tier. The 5 nm process node and 16,900 million transistors on a 149 mm² die show efficiency, but the 130 W TDP and single 8-pin power connector indicate a power envelope that limits high-end performance.

In Pc Building Simulator, the GPU's role is critical at all resolutions. The 4K results, where even Low settings only reach 78 FPS, demonstrate that the RTX 5050's memory bandwidth and fill rate are the limiting factors. The 20 RT cores and 80 tensor cores provide ray tracing and AI acceleration, but these features are not heavily utilized in this simulation title. The GPU's DirectX 12 Ultimate support ensures compatibility, but the game's 2019 release likely does not leverage the Blackwell 2.0 architecture's full feature set.

The RTX 5050's performance characteristics—8 GB VRAM, 128-bit bus, and 320.0 GB/s bandwidth—are well-matched to 1080p and 1440p gaming but fall short at 4K. The measured FPS data confirms this: 1080p Ultra at 113 FPS and 1440p Medium at 106 FPS are strong results, while 4K Medium at 55 FPS and 4K High at 39 FPS are below the 60 FPS threshold. For players prioritizing higher resolutions, a GPU with more VRAM and bandwidth would be necessary, but for 1080p and 1440p, the RTX 5050 delivers solid performance.