Pc Building Simulator

# Resolution Scaling

The measured FPS data for Pc Building Simulator reveals a predictable but steep resolution curve for the AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 4070 SUPER. At 1080p with Low settings, the combo pushes 409 FPS average. Moving to 1440p Low drops that to 258 FPS, a 37% reduction, and at 4K Low the average falls to 135 FPS, which is 67% below the 1080p figure. This pattern indicates that at lower resolutions and settings, the system is heavily CPU-bound, as the frame rates are far beyond what most displays can even refresh.

At High settings, the scaling is slightly less dramatic but still steep. The 1080p High average is 205 FPS, 1440p High drops to 129 FPS (a 37% decline), and 4K High lands at 67 FPS (a 67% decline from 1080p). The consistency of these percentage drops across Low and High presets suggests that the game's rendering workload scales almost linearly with pixel count, which is typical for a simulation title that is not heavily GPU-optimized.

The Medium and Ultra presets tell a similar story. At Medium, 1080p yields 290 FPS, 1440p yields 183 FPS, and 4K yields 96 FPS. At Ultra, the numbers are 195 FPS, 123 FPS, and 64 FPS respectively. The 4K Ultra result of 64 FPS is just below the 67 FPS High result at the same resolution, indicating that Ultra settings impose only a marginal additional cost over High at 4K. This small delta suggests that the game's Ultra preset is not dramatically more demanding than High, at least for this hardware combination.

The data strongly indicates that the limiting component at 4K is the GPU. At 4K Medium, the average FPS is 96, which is 60% higher than the 4K Ultra figure of 64 FPS, showing that the RTX 4070 SUPER is responsive to settings changes at this resolution. However, the gap between 1080p and 4K at any given preset is substantial, confirming that the GPU is the primary bottleneck at higher resolutions despite its capable 12 GB of GDDR6X memory and 504.2 GB/s bandwidth.

For players targeting 4K, the RTX 4070 SUPER can maintain playable frame rates, but only at Medium or High settings. The 4K Medium result of 96 FPS with a minimum of 81 FPS is smooth, while 4K Ultra at 64 FPS is borderline for fast-paced scenes. The 1080p and 1440p results are so high that they are effectively limited by the CPU and memory subsystem rather than the GPU, making this combo ideal for high-refresh-rate monitors at those resolutions.

Settings Recommendations

The benchmark data provides clear guidance on which preset offers the best experience for this specific hardware combination. At 4K, the Medium preset delivers 96 FPS average with a minimum of 81 FPS, which is the sweet spot for maintaining smooth gameplay without sacrificing too much visual quality. The High preset at 4K yields 67 FPS, which is still playable but noticeably lower, while Ultra drops to 64 FPS. The jump from Medium to High at 4K costs 29 FPS (from 96 to 67), which is a 30% performance penalty for what appears to be a modest visual improvement based on the frame rate behavior.

At 1440p, the Medium preset stands out as the best balance, delivering 183 FPS average with a minimum of 155 FPS. This is well above the 144 Hz refresh rate that most 1440p gaming monitors support, and it leaves headroom for any frame-time spikes. The High preset at 1440p delivers 129 FPS, which is still excellent, and Ultra delivers 123 FPS. The difference between High and Ultra at 1440p is only 6 FPS, suggesting that players can enable Ultra without a meaningful performance hit. However, the Medium preset's 183 FPS is so far above the competition that it is the recommended choice for competitive play or high-refresh-rate displays.

At 1080p, the Low preset produces an extraordinary 409 FPS average, which is far beyond the capabilities of most monitors. The Medium preset at 290 FPS is also excessive for typical use, and even the Ultra preset at 195 FPS exceeds the refresh rate of most 1080p displays. For this resolution, the Ultra preset is recommended because it delivers 195 FPS, which is still above 144 Hz, and it provides the best visual quality without any practical performance concern. The High preset at 205 FPS is nearly identical to Ultra in performance, so the choice between them comes down to visual preference.

The measured data shows that the Medium preset consistently provides the highest frame rates relative to visual quality across all three resolutions. At 4K, it is the only preset that exceeds 90 FPS, and at 1440p it exceeds 180 FPS. The Ultra preset is only 29% slower than Medium at 4K, but the absolute frame rate difference is significant enough to recommend Medium for anyone prioritizing smoothness. For those with variable refresh rate monitors, the Medium preset's minimum frame rates (81 FPS at 4K, 155 FPS at 1440p, 246 FPS at 1080p) ensure that the experience remains fluid even during demanding scenes.

CPU Role

The AMD Ryzen 7 9850X3D is a 9000-series processor with 8 cores and 16 threads, based on the Zen 5 architecture (Granite Ridge) manufactured on a 4 nm process at TSMC. Its base clock of 4.70 GHz and boost clock of 5.60 GHz, combined with a 96 MB shared L3 cache, make it an exceptionally strong processor for simulation games, which often have complex logic that benefits from high single-thread performance and large caches. The CPU's benchmark scores confirm its strength: it scores 22,807 in Cinebench R23 multi-core and 2,228 in single-core, with a PassMark multi-thread score of 41,318 and single-thread score of 4,704.

In Pc Building Simulator, the CPU's role is clearly dominant at lower resolutions. The 1080p Low result of 409 FPS is more than three times the 4K Low result of 135 FPS, which strongly indicates that the CPU is capable of feeding the GPU an enormous number of frames when the GPU is not the bottleneck. The fact that 1080p Ultra (195 FPS) is still far above 4K Medium (96 FPS) further demonstrates that the CPU is not the limiting factor even at higher settings, as long as the resolution is low enough to keep the GPU from becoming saturated.

The CPU's 8 cores and 16 threads are well-suited for a simulation game that likely runs many concurrent physics and logic threads. The PassMark data compression score of 474,501 and encryption score of 22,856 indicate strong multi-threaded throughput, which is beneficial for a game that simulates PC building components and their interactions. The large 96 MB L3 cache is particularly advantageous for this genre, as it reduces memory latency for frequently accessed game state data, which can improve frame pacing and minimum frame rates.

The benchmark results show that the Ryzen 7 9850X3D ranks in the 92nd percentile among all CPUs, with an average benchmark score of 58,386. Its nearest rival, the Intel Xeon Platinum 8260M, scores 58,323, which is only 0.1% behind, while the Intel Core i9-14900 scores 58,115 at 0.5% behind. This places the 9850X3D in elite company, and the data shows that its performance is sufficient to drive frame rates well above 200 FPS at 1080p in this game, making the CPU a non-issue for Pc Building Simulator under any settings configuration.

How This Combo Ranks

The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4070 SUPER combination ranks 405th out of 3,002 tested combos in Pc Building Simulator, placing it in the top 13.5% of all configurations. This is a strong showing for a mid-range GPU paired with a high-end CPU, and it indicates that the combo is well-balanced for this title. The rank of 405 suggests that while there are many faster combinations, this setup delivers excellent frame rates that are limited primarily by the GPU at higher resolutions rather than the CPU.

The combo's ranking is noteworthy because the RTX 4070 SUPER is rated in the 83rd percentile among all GPUs, while the Ryzen 7 9850X3D is in the 92nd percentile among CPUs. This imbalance might suggest that the GPU is the weaker link, and indeed the data confirms this: at 4K Ultra, the combo achieves 64 FPS, which is respectable but not exceptional for a top-tier setup. The fact that the combo still ranks in the top 405 of 3,002 confirms the game's relatively light GPU requirements at lower resolutions, where the CPU's strength can dominate.

Compared to other combos in the database, this pairing benefits from the CPU's outstanding single-thread performance, which is critical for simulation games that often have a main game thread that cannot be fully parallelized. The Ryzen 7 9850X3D's Cinebench R23 single-core score of 2,228 is a strong indicator of this capability, and it allows the combo to achieve 409 FPS at 1080p Low, which is likely near the top of the performance envelope for any CPU. The GPU's role becomes more significant at 4K, where the combo's rank would likely be lower, but the overall rank of 405 reflects the game's broad resolution scalability.

The ranking data shows that this combo is a high-performing configuration that will satisfy most players, especially those using 1080p or 1440p displays. The gap between the combo's rank and the top of the list is primarily due to the GPU, as a more powerful graphics card would push the 4K frame rates higher. However, for a game like Pc Building Simulator, where the simulation logic is CPU-intensive, the Ryzen 7 9850X3D's strengths are fully utilized, and the RTX 4070 SUPER provides more than enough graphics power for smooth gameplay at all but the most demanding settings.

GPU Role

The NVIDIA GeForce RTX 4070 SUPER is an Ada Lovelace architecture GPU with 7,168 shading units, 224 texture mapping units, and 80 ROPs, built on a 5 nm process at TSMC. Its base clock of 1980 MHz and boost clock of 2475 MHz, combined with 12 GB of GDDR6X memory on a 192-bit bus, provide a memory bandwidth of 504.2 GB/s. The GPU's compute capabilities include 35.48 TFLOPS of FP32 performance and 56 RT cores, making it a capable mid-to-high-end card that is well-suited for 1440p gaming and acceptable for 4K at moderate settings.

In Pc Building Simulator, the GPU's role becomes increasingly important as resolution increases. At 1080p, the GPU is rarely the bottleneck, as evidenced by the 409 FPS Low result and 195 FPS Ultra result, both of which are far above the CPU's ability to feed frames at that resolution. However, at 4K, the GPU's limitations become apparent: the 4K Ultra result of 64 FPS is less than one-third of the 1080p Ultra result, indicating that the GPU is struggling to render the higher pixel count. The 4K Medium result of 96 FPS is more acceptable, but it still represents a significant drop from the 1440p Medium result of 183 FPS.

The GPU's 12 GB of GDDR6X memory is sufficient for this game at all tested settings, as Pc Building Simulator does not appear to be a VRAM-heavy title. The 504.2 GB/s bandwidth is also adequate, as the frame rate drops from 1440p to 4K are consistent with a pixel-fill-rate bottleneck rather than a memory bandwidth constraint. The GPU's 80 ROPs and 198.0 GPixel/s pixel rate are likely the limiting factors at 4K, as the game's rendering workload scales directly with resolution.

The RTX 4070 SUPER ranks in the 83rd percentile among all GPUs, with an average benchmark score of 43,223. Its nearest rivals include the NVIDIA Quadro M6000 24 GB (score 43,262, delta -0.1%) and the NVIDIA GeForce RTX 4090 Mobile (score 43,667, delta -1%), which indicates that the desktop RTX 4070 SUPER performs at a similar level to a top-tier laptop GPU. This positioning suggests that the card is a solid performer, but it is not at the top of the desktop GPU hierarchy, which explains why the combo's 4K frame rates are limited to around 64-96 FPS depending on settings.

For Pc Building Simulator, the RTX 4070 SUPER is a capable companion to the Ryzen 7 9850X3D, but the data clearly shows that the GPU is the limiting component at 4K. Players who prioritize 4K gaming would benefit from a stronger GPU, while those who play at 1080p or 1440p will find that the RTX 4070 SUPER provides ample frame rates without any CPU limitation.

FAQ

Q: What is the highest average FPS achievable with this combo?

A: The highest recorded average FPS is 409, achieved at 1920x1080 resolution with Low settings. This is far above any display's refresh rate and demonstrates the CPU's dominance at low resolutions.

Q: Is this combo better suited for 1080p or 4K gaming?

A: The data shows this combo is exceptional at 1080p and 1440p, with frame rates above 195 FPS even at Ultra settings. At 4K, the combo is limited to 64-135 FPS depending on settings, making it playable but not ideal for maximum visual quality at that resolution.

Q: What is the minimum FPS recorded at 4K Medium settings?

A: At 3840x2160 with Medium settings, the minimum FPS is 81, with an average of 96 FPS and a maximum of 110 FPS. This indicates that the combo maintains consistent frame pacing at 4K Medium.

Q: How does the Ryzen 7 9850X3D compare to its nearest CPU rival?

A: The Ryzen 7 9850X3D has an average benchmark score of 58,386, while its closest rival, the Intel Xeon Platinum 8260M, scores 58,323, a delta of 0.1%. The Intel Core i9-14900 scores 58,115, which is 0.5% behind.

Q: What is the combo's ranking among all tested configurations?

A: The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4070 SUPER rank 405th out of 3,002 tested combos in Pc Building Simulator, placing it in the top 13.5% of all configurations.

Q: Which settings preset offers the best balance of performance and quality?

A: The Medium preset provides the best balance across all resolutions. At 4K it delivers 96 FPS, at 1440p it delivers 183 FPS, and at 1080p it delivers 290 FPS, all with respectable minimum frame rates.