Pc Building Simulator

# Pc Building Simulator — AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 5070

The AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5070 combination produces a broad performance envelope in Pc Building Simulator, with measured average frame rates spanning from 62 FPS at 4K Ultra to 352 FPS at 1080p Low. The data shows a system that is heavily GPU-limited at higher resolutions and progressively more balanced as resolution drops, with the CPU's 96 MB of shared L3 cache and 6-core/12-thread configuration proving sufficient to feed the RTX 5070 at 1080p. This combo ranks 561st out of 3,002 tested combinations, placing it in the top 19% of all tested systems for this title.

Resolution Scaling

The measured FPS data reveals a steep and consistent resolution scaling curve. Moving from 1920x1080 to 2560x1440 at High settings, average FPS drops from 196 to 124, a 37% reduction. Scaling further to 3840x2160 at High yields 65 FPS, which is a 48% drop from the 1440p figure and a 67% drop from 1080p. This pattern indicates that the RTX 5070's rendering workload scales nearly linearly with pixel count, a hallmark of GPU-bound performance where the graphics card is the primary limiting component.

At Low settings, the scaling is even more pronounced in absolute terms. The 1080p Low result of 352 FPS falls to 248 FPS at 1440p (a 30% reduction) and then to 129 FPS at 4K (a 48% reduction from 1440p). The fact that 4K Low (129 FPS) still delivers more than double the frame rate of 4K Ultra (62 FPS) underscores how much headroom exists when pixel shading and texture complexity are reduced. The gap between Low and Ultra at each resolution is substantial: at 1080p, Low produces 352 FPS versus 187 FPS for Ultra (an 88% advantage for Low); at 1440p, the gap is 248 versus 118 (110% advantage); at 4K, it is 129 versus 62 (108% advantage). This consistency suggests the scaling penalty for Ultra settings is roughly a 47-53% FPS reduction relative to Low across all resolutions.

The Medium preset provides the only rows with min/max FPS data, offering insight into frame time stability. At 4K Medium, the average is 92 FPS with a range of 78 to 105 FPS, a spread of 27 FPS (29% of the average). At 1440p Medium, the average is 175 FPS with a range of 149 to 202 FPS, a spread of 53 FPS (30% of average). At 1080p Medium, the average is 278 FPS with a range of 236 to 320 FPS, a spread of 84 FPS (30% of average). The consistent ~30% spread across resolutions indicates frame pacing is scale-invariant, which points to a stable rendering pipeline rather than resolution-dependent stuttering.

The overall shape of the scaling curve — with 4K Ultra (62 FPS) barely exceeding half the frame rate of 1080p Ultra (187 FPS) — suggests Pc Building Simulator's rendering engine is heavily pixel-bound. The RTX 5070's 12 GB of GDDR7 memory and 672.0 GB/s bandwidth appear adequate at all tested settings, as no anomalous drops suggest VRAM capacity or bandwidth saturation.

GPU Role

The NVIDIA GeForce RTX 5070 is the dominant performance driver in this combo, and the benchmark results reflect a GPU that is well-matched to the game's demands at 1440p and below. The GPU's 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which the data shows is sufficient for even 4K Ultra without catastrophic frame rate collapse — the 62 FPS average at that setting is playable, though not ideal for high-refresh displays.

The RTX 5070's clock behavior — 2325 MHz base and 2512 MHz boost — contributes to its measured performance. The boost clock is only 8% above the base clock, suggesting the card maintains stable operating frequencies under load. The GPU's 6144 shading units and 80 ROPs deliver a pixel rate of 201.0 GPixel/s and a texture rate of 482.3 GTexel/s, which align with the observed scaling pattern: at 4K (8.3 million pixels), the theoretical pixel throughput translates to roughly 83 FPS at peak efficiency, and the measured 65 FPS at High settings indicates roughly 78% utilization of that theoretical ceiling.

The GPU's benchmark percentile of 82 (versus all GPUs) and its Passmark G3D score of 29137 place it above average, but its nearest rivals in the database — the AMD Radeon Pro 580 (deltaPct 0.1%), Radeon Pro WX 7100 (deltaPct 0.8%), and Radeon Pro 5300 (deltaPct -1.2%) — are all workstation-class parts with similar aggregate scores. This is notable because the RTX 5070's 30.87 TFLOPS FP32 performance and 12 GB VRAM are architecturally different from those rivals, yet the aggregate benchmark scores converge. In Pc Building Simulator specifically, the measured FPS at 4K Ultra (62 FPS) versus 1080p Ultra (187 FPS) shows the GPU's raw throughput is the binding constraint at high resolutions.

The RTX 5070 supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, which covers the API requirements of a 2019 simulation title. The GPU's 48 RT cores and 192 tensor cores are present but the game's rendering workload appears to be rasterization-focused, as the scaling behavior follows classic pixel-bound patterns rather than ray-tracing bottlenecks. The 250 W TDP and 600 W suggested PSU indicate the card draws substantial power, but the measured performance suggests this power budget is translated into consistent frame delivery across all tested settings.

CPU Role

The AMD Ryzen 5 7500X3D provides the computational backbone for this combo, and its influence on measured FPS is most visible at lower resolutions where GPU load diminishes. The CPU's 6 cores and 12 threads at 4.00 GHz base and 4.50 GHz boost clocks, combined with 96 MB of shared L3 cache, deliver a Passmark single-thread score of 3494 and a multithread score of 25047. The 89th percentile ranking versus all CPUs confirms this is a high-performing processor for gaming workloads.

The CPU's nearest rivals in the database provide context for its capabilities. The Intel Core Ultra X9 388H scores 44466 (deltaPct 0.2%), the Intel Core i9-13950HX scores 44342 (deltaPct 0.5%), and the AMD Ryzen AI Max 385 scores 44309 (deltaPct 0.6%) — all are within 0.6% of the 7500X3D's average benchmark score of 44573. The Intel Core i5-14600 scores 44889 (deltaPct -0.7%), meaning the 7500X3D trails that part by 0.7%. This tight clustering around the 44,500-44,900 score range indicates the 7500X3D is competitive with top mobile and desktop parts from both AMD and Intel.

In Pc Building Simulator, the CPU's role becomes evident when comparing 1080p results across settings. At 1080p Low, the combo achieves 352 FPS, which approaches the CPU's practical rendering ceiling. The jump from 1080p Low (352 FPS) to 1080p Medium (278 FPS) is a 21% reduction, while the jump from Medium to High (196 FPS) is a 29% reduction, and High to Ultra (187 FPS) is only a 5% reduction. The small delta between High and Ultra at 1080p (196 to 187 FPS) suggests the CPU is beginning to limit frame delivery at this resolution, as the GPU's additional work at Ultra settings is not fully reflected in FPS penalties.

The CPU's 65 W TDP and 5 nm TSMC process node (with 11,270 million transistors on a 71 mm² die) indicate high efficiency, but the measured data shows no thermal throttling indicators — the consistent FPS across multiple runs at each setting confirms stable performance. The 7500X3D's 83.2 GB/s dual-channel DDR5 memory bandwidth and PCIe Gen 5 interface (24 lanes) are more than sufficient for the RTX 5070's PCIe 5.0 x16 bus, so no interconnect bottleneck is evident in the results.

At 4K resolutions, the CPU's influence diminishes. The gap between 4K Low (129 FPS) and 4K Ultra (62 FPS) is dominated by GPU load, and the 7500X3D's 12 threads are adequate to feed the GPU without introducing CPU-bound frame drops. The 4K Medium min FPS of 78 (versus average 92) indicates the CPU maintains frame delivery even under load spikes, as the GPU remains the primary constraint at this resolution.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the best balance of visual quality and performance across all three resolutions. At 1080p Medium, the combo delivers 278 FPS with a 236-320 FPS range, which exceeds the refresh rate of virtually all displays while maintaining a 30% frame time spread. The jump from Medium to High at 1080p costs 29% of the frame rate (278 to 196 FPS) for a visual improvement that is unlikely to be perceptible at these frame rates.

At 1440p, Medium produces 175 FPS (149-202 range), which is ideal for high-refresh 1440p monitors (typically 144-180 Hz). High at 1440p drops to 124 FPS, which is still smooth but sacrifices 29% of the Medium frame rate. Ultra at 1440p yields 118 FPS, which is only 5% below High — suggesting that Ultra settings at 1440p are nearly as efficient as High while offering better visuals.

At 4K, Medium delivers 92 FPS (78-105 range), which is the only preset that comfortably exceeds 60 FPS at this resolution. High (65 FPS) is borderline for 60 Hz displays, and Ultra (62 FPS) dips below the ideal 60 FPS threshold. Low at 4K (129 FPS) is playable but sacrifices significant visual quality for frame rate headroom that most 4K displays cannot utilize beyond 120 Hz.

The data suggests that 4K Ultra (62 FPS) is the weakest configuration in the measured set, while 1080p Low (352 FPS) represents the absolute ceiling of this combo's performance. For most users, the optimal configuration is 1440p Medium (175 FPS) or 4K Medium (92 FPS) depending on display resolution, as these settings provide frame rates that are both smooth and stable without the diminishing returns of Ultra presets.

FAQ

Q: What is the highest measured frame rate for this combo in Pc Building Simulator?

A: The highest measured average FPS is 352 at 1920x1080 with Low settings. The next highest is 278 FPS at 1080p Medium, followed by 248 FPS at 1440p Low.

Q: Can this combo maintain 60 FPS at 4K with maximum settings?

A: At 4K Ultra, the measured average FPS is 62, which is just above the 60 FPS threshold. However, the minimum FPS was not recorded for this setting, so frame drops below 60 FPS cannot be ruled out. At 4K High, the average is 65 FPS, providing slightly more headroom.

Q: How does the RTX 5070's aggregate benchmark score compare to its nearest rivals?

A: The RTX 5070's average benchmark score is 40377. The AMD Radeon Pro 580 scores 40318 (0.1% higher), the Radeon Pro WX 7100 scores 40063 (0.8% higher), and the Radeon Pro 5300 scores 40870 (1.2% lower). The NVIDIA RTX A500 Mobile scores 39568, which is 2% lower.

Q: What is the frame time variance at Medium settings across resolutions?

A: At 4K Medium, the FPS range is 78-105 (average 92), a spread of 27 FPS. At 1440p Medium, the range is 149-202 (average 175), a spread of 53 FPS. At 1080p Medium, the range is 236-320 (average 278), a spread of 84 FPS. The spread is consistently 30% of the average at all resolutions.

Q: How does the Ryzen 5 7500X3D compare to the Intel Core i5-14600 in aggregate benchmarks?

A: The Ryzen 5 7500X3D has an average benchmark score of 44573, while the Intel Core i5-14600 scores 44889. The deltaPct is -0.7%, meaning the 7500X3D trails the i5-14600 by 0.7%. The two parts are effectively within 1% of each other.

Q: Does the combo's rank of 561 out of 3002 indicate good performance?

A: Yes, ranking 561st out of 3,002 tested combos places this system in the top 18.7% of all tested combinations for Pc Building Simulator. This is a strong result, particularly given the game's simulation genre which often favors CPU performance.

Measured FPS Breakdown

1920x1080 (1080p):

• Low: 352 FPS average
• Medium: 278 FPS average, 236 min, 320 max
• High: 196 FPS average
• Ultra: 187 FPS average

2560x1440 (1440p):

• Low: 248 FPS average
• Medium: 175 FPS average, 149 min, 202 max
• High: 124 FPS average
• Ultra: 118 FPS average

3840x2160 (4K):

• Low: 129 FPS average
• Medium: 92 FPS average, 78 min, 105 max
• High: 65 FPS average
• Ultra: 62 FPS average

The scaling from 1080p to 1440p at each settings tier: Low drops 30% (352 to 248), Medium drops 37% (278 to 175), High drops 37% (196 to 124), and Ultra drops 37% (187 to 118). From 1440p to 4K: Low drops 48% (248 to 129), Medium drops 47% (175 to 92), High drops 48% (124 to 65), and Ultra drops 47% (118 to 62). The near-identical percentage drops within each resolution tier across settings indicate that resolution scaling is uniform regardless of preset, reinforcing the GPU-bound nature of the workload.

How This Combo Ranks

The combination of AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5070 ranks 561st out of 3,002 tested combos in Pc Building Simulator, placing it in the 81st percentile of all tested systems. This rank reflects the balanced nature of the pairing: the CPU's 89th percentile ranking (versus all CPUs) and the GPU's 82nd percentile ranking (versus all GPUs) combine to produce a system that performs above the median in this simulation title.

The rank of 561 out of 3,002 means 561 systems perform better and 2,441 perform worse. Given that Pc Building Simulator is a CPU-sensitive simulation game, the 7500X3D's 96 MB L3 cache and 6-core/12-thread configuration contribute significantly to this strong showing. The CPU's nearest rivals — all scoring within 0.7% of its 44573 average — are mobile and desktop parts that would likely produce similar ranks when paired with comparable GPUs.

The GPU's nearest rivals in aggregate benchmarks (Radeon Pro 580, Radeon Pro WX 7100, Radeon Pro 5300, RTX A500 Mobile) are workstation parts that would not typically be paired with a gaming-oriented CPU like the 7500X3D, so the measured FPS in this title is likely better than what those GPU rivals would achieve in the same configuration. The 82nd percentile GPU ranking confirms the RTX 5070 is a strong performer, and the 4K Medium result of 92 FPS demonstrates that this combo can handle high-resolution simulation gaming without compromise.