Pc Building Simulator

Pc Building Simulator is a simulation title that tasks players with assembling and configuring PCs, and the benchmark data for the AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 4070 SUPER reveals a system that is overwhelmingly GPU-bound at higher resolutions, while at 1080p it exposes a CPU that is more than capable of pushing frame rates into the upper echelons. The measured results show a clear scaling pattern from 1080p to 4K, with the frame rate dropping by roughly 45% between the lowest and highest resolution at High settings, indicating that the graphics card is the primary limiting factor as pixel count increases.

Resolution Scaling

The resolution scaling for this combination in Pc Building Simulator is steep and predictable, with the most significant performance drop occurring between 1440p and 4K. At High settings, the average frame rate falls from 205 FPS at 1920x1080 to 129 FPS at 2560x1440, a reduction of 76 FPS, and then further down to 67 FPS at 3840x2160, representing a 48% decrease from 1440p to 4K. This pattern is consistent across all settings presets, but the magnitude of the drop is most pronounced at the higher quality levels where the GPU workload is heavier.

At Low settings, the system demonstrates its raw potential, hitting 352 FPS at 1080p, 258 FPS at 1440p, and 135 FPS at 4K. The scaling here shows a 62% reduction from 1080p to 4K, which is a larger relative drop than at High settings, suggesting that when the graphical load is light, the CPU becomes more of a factor in maintaining frame rates, though the absolute numbers remain exceptionally high. The data indicates that the RTX 4070 SUPER is the component that dictates performance at 4K, as the frame rates at this resolution are far lower than what the CPU's benchmark scores would suggest it could feed.

The Medium preset provides the only rows with min and max FPS data, offering a glimpse into frame time consistency. At 3840x2160 Medium, the average is 96 FPS with a minimum of 81 and a maximum of 110, a spread of 29 FPS that shows a relatively stable experience. At 2560x1440 Medium, the average jumps to 183 FPS with a min of 155 and max of 210, while at 1920x1080 Medium, the average is 290 FPS with min 246 and max 333. The consistency of the frame pacing, as evidenced by the min FPS being within 85% of the average at 4K, suggests that the system does not suffer from severe stuttering, even when the GPU is under maximum load.

The scaling behavior points to a system that is well-balanced for high-refresh-rate 1440p gaming, where it can comfortably exceed 120 FPS at Ultra settings. At 4K, the system is still very playable, but the data shows a clear transition from a CPU-limited scenario at 1080p to a firmly GPU-limited scenario at 4K, making the resolution choice the single most impactful decision for players seeking specific frame rate targets.

FAQ

Q: What is the maximum average frame rate achieved with this CPU and GPU combination?

A: The highest average frame rate recorded is 352 FPS, achieved at 1920x1080 resolution with Low settings. This represents the absolute ceiling for this pairing in Pc Building Simulator.

Q: Is this system capable of 4K gaming at high refresh rates?

A: At 3840x2160, the system delivers 67 FPS on High settings and 64 FPS on Ultra. While this is playable, it falls short of the 144 Hz or higher refresh rates that the system can easily achieve at 1440p. For a 60 FPS target, the High preset at 4K is sufficient, but for 120+ FPS, a lower resolution is required.

Q: How does the CPU's performance compare to its nearest rivals in synthetic benchmarks?

A: The AMD Ryzen 5 7500X3D has an average benchmark score of 44573, which is 0.2% higher than the Intel Core Ultra X9 388H and 0.5% higher than the Intel Core i9-13950HX. It trails the Intel Core i5-14600 by 0.7%, placing it in a very tight competitive cluster.

Q: What is the role of the CPU's cache in this game's performance?

A: The CPU features a large 96 MB shared L3 cache, which is a significant asset for simulation games like Pc Building Simulator that often involve managing numerous objects and data streams. This large cache helps reduce memory latency and improve data throughput, contributing to the high minimum frame rates observed at lower resolutions.

Q: Does the GPU have enough VRAM for 4K Ultra settings?

A: The RTX 4070 SUPER comes equipped with 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. The benchmark data shows that at 4K Ultra settings, the system averages 64 FPS, indicating that the 12 GB capacity is sufficient for this title's demands at that resolution and preset.

Q: How does the RTX 4070 SUPER stack up against its nearest GPU rivals?

A: The GPU's average benchmark score is 43223, which is 0.1% lower than the NVIDIA Quadro M6000 24 GB and the NVIDIA GeForce RTX 5050 Mobile. It is 0.2% lower than the Quadro M6000 and 1% lower than the RTX 4090 Mobile, showing that it performs in a similar tier to these competitors in general compute workloads.

CPU Role

The AMD Ryzen 5 7500X3D is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 Raphael architecture using a 5 nm process from TSMC. It operates with a base clock of 4.00 GHz and a boost clock of 4.50 GHz, which are moderate frequencies for this generation. However, its defining feature is the substantial 96 MB of shared L3 cache, which is a hallmark of the X3D line and is particularly beneficial for gaming workloads that rely on data locality.

In Pc Building Simulator, the CPU's role becomes evident when analyzing the frame rates at 1080p. At Low settings, the system produces 352 FPS, which is a massive 72% higher than the 205 FPS at High settings. This gap indicates that at Low settings, the CPU is able to feed frames to the GPU much faster, and the bottleneck shifts away from the graphics card. The single-thread performance, as measured by a Passmark score of 3494, is strong and contributes to the high frame rates in a game that may not be heavily multithreaded.

The CPU's multithreaded score of 25047 and an average benchmark score of 44573 place it in the 89th percentile of all CPUs. This places it in a tight race with its nearest rivals, where a 0.2% delta separates it from the Intel Core Ultra X9 388H and a 0.5% delta from the Intel Core i9-13950HX. The data suggests that the 7500X3D is not a performance outlier in synthetic tests, but its cache configuration is tailored for real-world gaming scenarios. The high L3 cache size likely minimizes the performance penalty when the game's simulation logic accesses large datasets, ensuring that the minimum frame rates at 1080p Medium (246 FPS) remain exceptionally high.

The processor's 65W TDP and support for DDR5 memory with a dual-channel bus and 83.2 GB/s bandwidth round out its profile. The benchmark results indicate that the CPU is rarely the limiting factor at 1440p and above, where the GPU's workload dominates. At 4K, the difference between Low and High settings is 68 FPS (135 vs 67), which is a much smaller absolute gap than at 1080p, confirming that the CPU has ample headroom to feed the GPU at higher resolutions.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system's performance across three resolutions and four settings presets. At 1920x1080, the average frame rates are 352 FPS on Low, 290 FPS on Medium, 205 FPS on High, and 195 FPS on Ultra. The Medium preset recorded a minimum of 246 FPS and a maximum of 333 FPS, showing a tight range that suggests excellent frame pacing. The jump from Low to Medium is 62 FPS, while the drop from High to Ultra is only 10 FPS, indicating diminishing returns at the highest quality settings.

Moving to 2560x1440, the system delivers 258 FPS on Low, 183 FPS on Medium, 129 FPS on High, and 123 FPS on Ultra. The Medium preset shows a minimum of 155 FPS and a maximum of 210 FPS. The scaling from Low to Ultra at this resolution is a 52% reduction, which is a significant performance cost for the visual fidelity upgrade. The difference between High and Ultra is a mere 6 FPS, making High the more sensible choice for players seeking near-maximum quality without the extra performance hit.

At 3840x2160, the system produces 135 FPS on Low, 96 FPS on Medium, 67 FPS on High, and 64 FPS on Ultra. The Medium preset has a minimum of 81 FPS and a maximum of 110 FPS. This resolution shows the most pronounced impact of settings changes, with the Low preset being more than double the frame rate of the Ultra preset. The gap between High and Ultra narrows to just 3 FPS at 4K, suggesting that Ultra offers no meaningful benefit over High at this resolution for this hardware combination.

The data reveals that the system is capable of 60+ FPS at 4K on all presets, but only the Low and Medium presets exceed 100 FPS. At 1440p, the High and Ultra presets both exceed 120 FPS, making this the sweet spot for high-refresh-rate monitors. At 1080p, all presets deliver over 190 FPS, which is ideal for competitive or high-frequency displays. The overall combination rank in game is 454 out of 3002 combos, placing this setup in the top 15% of tested configurations.

GPU Role

The NVIDIA GeForce RTX 4070 SUPER is built on the Ada Lovelace architecture using a 5 nm process from TSMC, featuring the AD104 chip with 35,800 million transistors on a 294 mm² die. It operates at a base clock of 1980 MHz and a boost clock of 2475 MHz, with 12 GB of GDDR6X memory on a 192-bit bus delivering a bandwidth of 504.2 GB/s. The GPU has 7168 shading units, 224 texture mapping units, and 80 raster output units, along with 56 RT cores and 224 tensor cores.

In Pc Building Simulator, the GPU's dominance is clear at 4K, where it is the sole bottleneck. The average frame rate at 4K Ultra is 64 FPS, which is nearly identical to the 67 FPS at High, indicating that the game's Ultra preset does not add a significant burden beyond High. The GPU's pixel rate of 198.0 GPixel/s and texture rate of 554.4 GTexel/s are substantial, but the game's simulation elements may not fully utilize these capabilities, leading to a plateau in performance at the highest settings.

The GPU's benchmark scores, including a Passmark G3D score of 29995 and a 3DMark Steel Nomad score of 4627, place it in the 83rd percentile of all GPUs. Its average benchmark score of 43223 is within 1% of several rivals, including the NVIDIA GeForce RTX 4090 Mobile, which has a higher absolute score but a 1% delta. This indicates that while the RTX 4070 SUPER is not a top-tier card, it delivers consistent performance that is well-suited for 1440p gaming and capable of entry-level 4K.

The 12 GB VRAM capacity proves sufficient for Pc Building Simulator, even at 4K Ultra, where the system maintains a playable average. The memory bandwidth of 504.2 GB/s is a critical factor for high-resolution textures, and the data shows no evidence of a memory capacity bottleneck. The GPU's TDP of 220 W and the suggested PSU of 550 W are practical for a dual-slot card, and its 16-pin power connector is standard for this generation. The GPU's end-of-life production status and its predecessor/successor relationship with the GeForce 30 and 50 series frame it as a current-gen mid-range option that performs admirably in this simulation title.

Settings Recommendations

The measured FPS data provides clear guidance for the optimal settings preset based on the user's resolution and frame rate target. For players using a 1080p display with a high refresh rate (144 Hz or above), the High preset at 205 FPS offers the best balance of visual quality and performance, as the Ultra preset only delivers 195 FPS, a marginal 5% reduction. The Medium preset at 290 FPS is also viable for those seeking maximum fluidity, but the visual trade-off is not justified given the system's ability to exceed 200 FPS on High.

At 1440p, the High preset at 129 FPS is the recommended choice for a 120 Hz or 144 Hz monitor, as it provides a smooth experience with good visual fidelity. The Ultra preset at 123 FPS is nearly identical in performance, so players can choose either based on preference, but the 6 FPS difference makes High the more efficient option. For a 60 Hz display, the Ultra preset at 123 FPS is overkill, and the High preset would be more than sufficient, potentially allowing for higher in-game settings elsewhere.

For 4K gaming, the Medium preset at 96 FPS is the sweet spot, offering a significant improvement over High (67 FPS) while maintaining a frame rate that is well above the 60 FPS standard. The Low preset at 135 FPS is an option for high-refresh-rate 4K displays, but the visual compromise is substantial. The High and Ultra presets at 67 FPS and 64 FPS respectively are playable but leave little headroom for demanding scenes, as evidenced by the 4K Medium minimum FPS of 81, which suggests that High and Ultra might dip below 60 FPS in complex scenarios.

The data suggests that the system is best utilized at 1440p with High settings for a premium experience, or at 4K with Medium settings for a high-fidelity, high-performance balance. The Ultra preset offers negligible gains over High across all resolutions, making it a poor choice for the performance cost. The Low preset is only recommended for competitive play at 1080p or for achieving the highest possible frame rates on 240 Hz+ displays, where the 352 FPS result provides the maximum benefit.