Pc Building Simulator

Pc Building Simulator is a simulation title that stresses system assembly logic more than raw graphical fidelity, but the measured FPS data for the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 3070 combination shows a clear performance curve across resolutions and settings. The dataset provides a full matrix of average frame rates at 1080p, 1440p, and 4K, with Low, Medium, High, and Ultra presets, allowing for a detailed analysis of where this combo excels and where it begins to strain.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a predictable shift in the bottleneck, moving from a CPU-light workload at lower resolutions to a GPU-bound scenario at higher pixel counts. At 1080p with Low settings, the combo produces 282 FPS, which drops to 191 FPS at 1440p and further to 100 FPS at 4K. This represents a 32% reduction from 1080p to 1440p, and a 65% reduction from 1080p to 4K. The scaling suggests that at 1080p Low, the system is not fully GPU-limited, as the RTX 3070 has headroom that the Ryzen 5 5600F cannot fully utilize in this particular simulation workload.

Moving to Medium settings, the pattern continues with 214 FPS at 1080p, 135 FPS at 1440p, and 71 FPS at 4K. The percentage drops are more pronounced here: 37% from 1080p to 1440p, and 67% from 1080p to 4K. The High preset shows 151 FPS at 1080p, 95 FPS at 1440p, and 50 FPS at 4K, with reductions of 37% and 67% respectively. Ultra settings follow with 144 FPS, 91 FPS, and 47 FPS, showing a 37% drop to 1440p and a 67% drop to 4K.

The consistent 37% reduction from 1080p to 1440p across Medium, High, and Ultra settings indicates that the RTX 3070 is becoming the primary limiting factor as resolution increases. The 67% reduction from 1080p to 4K is similarly uniform, suggesting a fixed GPU throughput ceiling. The anomaly is at Low settings, where the 32% drop to 1440p is smaller, implying that the CPU is partially constraining performance at 1080p Low, and the GPU has more relative headroom at that preset. At 4K, the gap between Low (100 FPS) and Ultra (47 FPS) is 53 FPS, while at 1080p the gap is 138 FPS (282 to 144), showing that resolution increases compress the performance range between settings.

How This Combo Ranks

Within the benchmark database, this specific CPU-GPU pairing ranks 1276 out of 3002 tested combinations for Pc Building Simulator. This places the combo in the 42.5th percentile of all tested configurations, meaning roughly 57.5% of combinations deliver higher average frame rates in this game. The rank is notable given the hardware's individual benchmarks: the Ryzen 5 5600F sits at the 85th percentile among all CPUs, while the RTX 3070 is at the 61st percentile among all GPUs.

The discrepancy between the CPU's high percentile rank and the overall combo rank suggests that Pc Building Simulator does not heavily reward the 5600F's strengths. The CPU's PassMark multithread score is 19236, and its single-thread score is 2872, but the game's simulation logic may not scale with these compute capabilities. The combo's mid-pack ranking indicates that while the RTX 3070 provides solid rasterization performance, the game's engine does not leverage the full potential of this pairing. The 5600F's nearest rivals, such as the Intel Core Ultra 5 225 with an average score of 36938 and a deltaPct of 0, and the AMD Ryzen 5 5500X3D at 37018 with a -0.2 deltaPct, show that the CPU is competitive with modern alternatives, yet the combo rank suggests other factors like memory bandwidth or cache configuration play a larger role in this specific title.

FAQ

Q: What is the highest average FPS achievable with this combo in Pc Building Simulator?

A: The highest measured average FPS is 282, achieved at 1920x1080 resolution with Low settings. This drops to 214 FPS at Medium, 151 FPS at High, and 144 FPS at Ultra for the same resolution.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the combo delivers an average of 47 FPS. This is the lowest measured result in the dataset, representing a 67% reduction from the 144 FPS seen at 1080p Ultra.

Q: Is the Ryzen 5 5600F or the RTX 3070 the limiting factor at 1080p Low?

A: The data indicates the CPU is partially limiting at 1080p Low. The FPS drop from 1080p to 1440p at Low settings is 32%, compared to 37% for Medium, High, and Ultra, suggesting the GPU has more headroom at the lowest preset.

Q: What is the average FPS at 1440p High settings?

A: At 2560x1440 with High settings, the combo produces an average of 95 FPS. This is 56 FPS lower than the 1080p High result of 151 FPS.

Q: How does the RTX 3070's benchmark score compare to its nearest rivals?

A: The RTX 3070 has an average benchmark score of 17208. The AMD Radeon RX 7600 XT scores 17083 with a deltaPct of 0.7, the NVIDIA GeForce GTX 690 scores 17037 with a deltaPct of 1, and the AMD Radeon HD 7970M scores 17019 with a deltaPct of 1.1. The NVIDIA Tesla K40c scores 17468 with a -1.5 deltaPct.

Q: What is the combo's rank among all tested configurations?

A: The combo ranks 1276 out of 3002 tested combinations for Pc Building Simulator.

Measured FPS Breakdown

The measured FPS data provides a complete picture across all twelve tested configurations. At 1920x1080, the Low preset delivers 282 FPS average, which is the highest score in the entire dataset. Medium settings at the same resolution produce 214 FPS, with a minimum of 182 FPS and a maximum of 246 FPS, indicating some frame variance. High settings yield 151 FPS, while Ultra drops to 144 FPS. The spread between Low and Ultra at 1080p is 138 FPS, showing that this resolution allows the GPU to flex its capabilities.

At 2560x1440, the Low preset achieves 191 FPS, a 32% reduction from 1080p Low. Medium settings produce 135 FPS with a range of 115 FPS minimum to 155 FPS maximum. High settings deliver 95 FPS, and Ultra settings achieve 91 FPS. The spread between Low and Ultra at 1440p narrows to 100 FPS, indicating the GPU is working harder at higher resolutions.

At 3840x2160, the Low preset delivers 100 FPS, which is still a playable frame rate for a simulation game. Medium settings produce 71 FPS with a minimum of 60 FPS and a maximum of 81 FPS. High settings drop to 50 FPS, and Ultra settings bottom out at 47 FPS. The spread between Low and Ultra at 4K is only 53 FPS, showing that the RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are being taxed heavily at this resolution.

The Medium preset is the only setting tier with min and max FPS recorded for all three resolutions. At 1080p, the 182-246 FPS range represents a 64 FPS swing. At 1440p, the 115-155 FPS range is a 40 FPS swing. At 4K, the 60-81 FPS range is only a 21 FPS swing. This tightening of frame variance at higher resolutions further confirms the GPU becoming the dominant bottleneck.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. The CPU has 32 MB of shared L3 cache, 512 KB of L2 cache per core, and 64 KB of L1 cache per core. Its PassMark multithread score of 19236 and single-thread score of 2872 place it at the 85th percentile among all CPUs.

In Pc Building Simulator, the CPU's role appears to be secondary to the GPU, given the combo's 1276th rank out of 3002. The 5600F's 6 cores and 12 threads are sufficient for the game's simulation logic, but the data does not show a scenario where the CPU is the primary limiter except possibly at 1080p Low. The 32% FPS drop from 1080p to 1440p at Low settings, compared to 37% at other presets, suggests the CPU is keeping the GPU fed adequately at 1080p Low, but the GPU's workload increases disproportionately at higher settings.

The CPU's benchmark scores, including a floating point math score of 34548 and an integer math score of 59339, indicate strong compute capabilities, but these do not translate into exceptional game performance. The nearest rival, the Intel Core Ultra 5 225, has an average score of 36938 with a deltaPct of 0, showing that the 5600F is essentially tied with this competitor. The AMD Ryzen 5 5500X3D scores 37018 with a -0.2 deltaPct, putting it slightly ahead. These marginal differences in CPU benchmarks do not manifest in significant FPS differences in this game, as the combo rank suggests other system components or game engine limitations are more influential.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the best balance of visual quality and performance for most users. At 1080p Medium, the combo delivers 214 FPS, which is 68 FPS higher than High settings and 70 FPS higher than Ultra. The minimum FPS of 182 at 1080p Medium ensures smooth frame delivery even during demanding simulation moments. At 1440p Medium, the 135 FPS average with a 115 FPS minimum remains well above the 60 FPS threshold for comfortable play. Even at 4K Medium, the 71 FPS average with a 60 FPS minimum provides a playable experience, though it is the lowest average that maintains a consistent minimum above 60 FPS.

For users prioritizing maximum visual fidelity, Ultra settings at 1080p deliver 144 FPS, which is still a high frame rate. However, at 1440p Ultra, the 91 FPS average is acceptable but shows a significant drop from Medium. At 4K Ultra, the 47 FPS average falls below the 60 FPS mark, making this setting combination less ideal for smooth gameplay. The High preset offers a middle ground, with 151 FPS at 1080p, 95 FPS at 1440p, and 50 FPS at 4K, but it does not provide a meaningful advantage over Medium in terms of playability.

The Low preset is the least recommended for this combo, as it sacrifices visual quality for frame rates that exceed what most displays can show. The 282 FPS at 1080p Low is beyond the refresh rate of typical monitors, making the extra performance negligible. The data suggests that Medium settings are the sweet spot, providing a 214 FPS ceiling at 1080p and a 71 FPS floor at 4K, which covers the full range of resolutions users might choose.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with a GA104 chip, manufactured on an 8 nm process by Samsung. It features 5888 shading units, 184 texture mapping units, and 96 raster operation units. The GPU has 46 ray tracing cores and 184 tensor cores, with a base clock of 1500 MHz and a boost clock of 1725 MHz. Its 8 GB of GDDR6 memory runs at 1750 MHz (14 Gbps effective) on a 256-bit bus, providing 448.0 GB/s of bandwidth.

The RTX 3070's PassMark G3D score is 22214, and its average benchmark score is 17208, placing it at the 61st percentile among all GPUs. Its FP32 performance is 20.31 TFLOPS, with a pixel rate of 165.6 GPixel/s and a texture rate of 317.4 GTexel/s. The GPU's nearest rival, the AMD Radeon RX 7600 XT, scores 17083 with a deltaPct of 0.7, making the 3070 slightly faster. The NVIDIA GeForce GTX 690 scores 17037 with a deltaPct of 1, and the AMD Radeon HD 7970M scores 17019 with a deltaPct of 1.1. The NVIDIA Tesla K40c scores 17468 with a -1.5 deltaPct, indicating it is faster in synthetic benchmarks.

In Pc Building Simulator, the GPU's role becomes increasingly dominant as resolution and settings increase. The 67% FPS reduction from 1080p to 4K across Medium, High, and Ultra settings illustrates the GPU's throughput limits. The 8 GB VRAM capacity is sufficient for this game, as the data does not show a sharp drop-off at 4K that would indicate memory capacity issues. The 448.0 GB/s bandwidth supports the high frame rates seen at 1080p, but at 4K, the GPU's compute resources become the limiting factor, as evidenced by the compressed performance range between Low and Ultra settings at that resolution.