Palworld

Palworld

AVERAGE FPS
120
excellent

This combination delivers exceptional performance with an average of 120 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 56 72 89
1440p QHD 76 100 130 161
1080p Full HD 116 152 198 244

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 89
3840x2160 Medium 72
3840x2160 High 56
3840x2160 Ultra 42
2560x1440 Low 161
2560x1440 Medium 130
2560x1440 High 100
2560x1440 Ultra 76
1920x1080 Low 244
1920x1080 Medium 198
1920x1080 High 152
1920x1080 Ultra 116

Palworld with Intel Core Ultra 7 165H + NVIDIA GeForce RTX 5080 Mobile, In-Depth Analysis

Palworld on the Intel Core Ultra 7 165H and NVIDIA GeForce RTX 5080 Mobile combination delivers a highly playable experience across all tested resolutions, with the data indicating that the GPU is the primary determinant of frame rates at higher settings, while the CPU's robust multi-threading capabilities ensure consistent performance at lower resolutions and settings.

Resolution Scaling

The measured FPS data reveals a clear and predictable scaling pattern as resolution increases from 1920x1080 to 3840x2160. At the High preset, the average frame rate drops from 152 FPS at 1080p to 100 FPS at 1440p, a reduction of approximately 34%, and then further to 56 FPS at 4K, which represents a 44% decrease from the 1440p figure. This steep decline at 4K strongly suggests that the rendering load is overwhelming the GPU, as the pixel count quadruples from 1080p to 4K, demanding significantly more from the graphics processor.

The scaling behavior across different presets reinforces this conclusion. At the Low preset, the system achieves 244 FPS at 1080p, 161 FPS at 1440p, and 89 FPS at 4K. The percentage drops are 34% from 1080p to 1440p and 45% from 1440p to 4K, which is remarkably similar to the High preset's scaling. This consistency indicates that even when graphical settings are minimized to reduce GPU load, the frame rate still scales almost linearly with resolution, a hallmark of a GPU-bound scenario. If the CPU were the limiting factor, we would expect to see a much smaller performance gap between resolutions, especially at lower settings where the GPU has less work to do.

At the Ultra preset, the pattern becomes even more pronounced. The average FPS at 1080p is 116, dropping to 76 FPS at 1440p (a 34% reduction) and then to 42 FPS at 4K (a 45% reduction from 1440p). This near-identical percentage drop across all presets from 1440p to 4K is a strong indicator that the RTX 5080 Mobile's compute and memory bandwidth are being saturated at 4K, regardless of the quality settings. The 4K results, ranging from 89 FPS on Low to 42 FPS on Ultra, show that achieving a smooth 60 FPS experience at 4K requires careful settings management, as only the Low preset comfortably exceeds this threshold.

In contrast, the scaling from 1080p to 1440p is less steep, with an average reduction of about 34% across all presets. This is still a significant drop but suggests that the GPU has more headroom at these resolutions. The data points to a system where the RTX 5080 Mobile is the definitive bottleneck at 4K, while at 1080p and 1440p, the combination of CPU and GPU works more harmoniously, with the GPU still being the primary driver of frame rates but with more performance in reserve.

CPU Role

The Intel Core Ultra 7 165H features 16 cores and 22 threads, with a base clock of 3.80 GHz and a boost clock of 5.00 GHz. This is a high-core-count mobile processor designed for multi-threaded workloads, as evidenced by its Cinebench R23 multi-core score of 14551 points. In Palworld, which is a survival game with complex world simulation and many simultaneous entities, this multi-threading capability is crucial. The data shows that at 1080p with Low settings, the system achieves 244 FPS, a frame rate so high that it is unlikely the CPU is the limiting factor. This suggests that the 165H's 22 threads are more than sufficient to feed the GPU at lower resolutions where the rendering load is lighter.

The CPU's performance relative to its peers reinforces its capability. Its average benchmark score of 34083 places it in the 84th percentile of all CPUs, and its nearest rivals include the AMD Ryzen 7 3700X, which has a nearly identical average score of 34260 (a delta of -0.5%). This indicates that the 165H offers desktop-class multi-threaded performance in a mobile form factor. In Palworld, this translates to consistent frame times and the ability to handle the game's background simulation tasks, such as resource gathering and creature AI, without causing stutters or frame drops. The Passmark multi-thread score of 25933 further confirms its strong parallel processing capabilities.

However, the CPU's single-thread performance is also notable. Its Cinebench R23 single-core score of 1759 and Passmark single-thread score of 3509 are respectable, ensuring that the game's primary game logic thread is not a bottleneck. The data from the measured FPS at 1080p, where the average frame rate exceeds 150 FPS on High and reaches 244 FPS on Low, confirms this balanced performance. In many games, high frame rates at 1080p can be limited by CPU single-core speed, but the 165H's 5.00 GHz boost clock appears to provide enough headroom to avoid this pitfall. The fact that the frame rate scales down from 244 FPS at Low to 198 FPS at Medium and then to 152 FPS at High at 1080p shows that the CPU is not capping the performance; rather, the GPU is doing progressively more work as settings increase.

The 165H's memory bandwidth of 89.6 GB/s from its dual-channel DDR5 support is sufficient to keep the CPU's cores fed with data. The 24 MB of shared L3 cache also helps reduce latency for frequently accessed game data. In Palworld, where large open-world areas stream in and out, this cache and memory subsystem performance contributes to smooth traversal and loading. The data indicates that the CPU role is to provide a stable, high-throughput foundation that allows the RTX 5080 Mobile to stretch its legs, especially at 1080p and 1440p where the frame rates are high enough to expose any CPU weakness. The benchmark results show no such weakness, with the combo performing admirably across the board.

GPU Role

The NVIDIA GeForce RTX 5080 Mobile is the undisputed performance driver in this configuration. With 16 GB of GDDR7 memory on a 256-bit bus, it offers a substantial 896.0 GB/s of memory bandwidth. This is critical for Palworld at high resolutions, as the game's large textures and open-world geometry require rapid data access. The GPU's 7680 shading units and 240 TMUs provide immense raw compute power, reflected in its FP32 performance of 23.04 TFLOPS. The 3DMark Steel Nomad DX12 score of 4952 and Passmark G3D score of 27711 place it in the 81st percentile of all GPUs, indicating it is a top-tier mobile graphics solution.

The GPU's role is most evident in the 4K results. At 3840x2160, the average FPS ranges from 89 on Low to 42 on Ultra. The gap between Low and Ultra is 47 FPS, a massive difference that highlights how much the GPU's fill rate and shading power are taxed by the higher settings. The Ultra preset at 4K, with an average of 42 FPS, is clearly GPU-bound, as the rendering demands exceed what the RTX 5080 Mobile can sustain for a 60 FPS experience. The Medium preset at 4K achieves 72 FPS with a minimum of 62 FPS, showing that the GPU can handle a balanced load at 4K, but only when settings are moderated.

The GPU's memory bandwidth and capacity are also key. The 16 GB VRAM is ample for Palworld at 4K, preventing any potential texture thrashing that could occur with lower-capacity GPUs. The 896.0 GB/s bandwidth ensures that the high-resolution textures are streamed to the GPU cores without becoming a bottleneck. This is reflected in the relatively modest performance drop from 1080p to 1440p, where the average FPS on High drops from 152 to 100. This 34% reduction is more attributable to the increased pixel count than to memory limitations, as the bandwidth scales well with the resolution demands.

Comparing the RTX 5080 Mobile to its nearest rivals, its average benchmark score of 38349 is 0.6% higher than the NVIDIA GeForce RTX 4080 Mobile's score of 38135. This indicates that the 5080 Mobile is a marginal improvement over the previous generation's flagship mobile GPU in synthetic benchmarks. In Palworld, this translates to the ability to push higher frame rates at 1440p and 4K, where the GPU is the primary constraint. The data shows that the GPU's performance is the deciding factor in whether the game runs at 42 FPS (4K Ultra) or 244 FPS (1080p Low), making it the component that users must manage through settings to achieve their desired frame rate.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution and desired frame rate. For a 60 FPS experience at 4K, the Medium preset is the clear choice. It delivers an average of 72 FPS with a minimum of 62 FPS, ensuring that the frame rate rarely dips below the 60 FPS threshold. The High preset at 4K, at 56 FPS average, is too risky for consistent smoothness, while the Ultra preset at 42 FPS is more suited for screenshot-taking or slow-paced exploration. The Low preset at 4K achieves 89 FPS, but the visual quality sacrifice is likely too significant for most players, making Medium the best balance of fidelity and performance.

At 1440p, the High preset is the sweet spot. It delivers an average of 100 FPS, which is well above the 60 FPS target and provides a smooth experience for most players. The Medium preset at 130 FPS is even faster, but the visual difference between Medium and High is often noticeable in a game like Palworld with its vibrant environments. The Ultra preset at 1440p averages 76 FPS, which is still playable, but the 24 FPS drop from High to Ultra suggests that the visual gains may not justify the performance cost. For players with high-refresh-rate 1440p monitors, the Medium preset at 130 FPS is recommended, as it approaches the 144 Hz mark.

At 1080p, the system has ample headroom. The High preset achieves 152 FPS, which is excellent for high-refresh-rate displays. The Ultra preset at 116 FPS is also very smooth and offers the best visual quality, making it the recommended choice for players who prioritize graphics over raw frame rates. The Low preset at 244 FPS is overkill for most monitors, and the Medium preset at 198 FPS is a good middle ground for competitive play if the slight visual downgrade from High is acceptable. For most users, the High preset at 1080p provides the best experience, as it combines high visual fidelity with a frame rate that exceeds the refresh rate of most monitors. The data clearly shows that the system can handle Ultra at 1080p without dipping below 116 FPS, so there is no reason to sacrifice visual quality at this resolution.

How This Combo Ranks

The combination of the Intel Core Ultra 7 165H and the NVIDIA GeForce RTX 5080 Mobile ranks 1024th out of 3711 tested combos in Palworld. This places it in the top 27.6% of all configurations, which is a solid result for a mobile platform. Given that this is a laptop setup, this ranking is particularly impressive, as it surpasses many desktop configurations that have more power headroom. The high percentile of the GPU (81st) and CPU (84th) individually contributes to this strong overall ranking, but the rank is specific to Palworld's performance characteristics.

The combo's ranking suggests that it outperforms the vast majority of tested systems in this game. This is consistent with the measured FPS data, which shows the system delivering high frame rates even at 1440p. The rank of 1024 out of 3711 means that there are 1023 combos that perform better, which likely include higher-end desktop GPUs like the RTX 4090 or multi-GPU setups, as well as more powerful desktop CPUs. However, for a mobile solution, this ranking reflects the efficiency of the Meteor Lake CPU and the Blackwell-based GPU architecture.

When interpreting this rank, it is important to note that Palworld is a game that can be demanding on both CPU and GPU, but the data suggests that the GPU is the more significant bottleneck at higher resolutions. The combo's rank is therefore likely determined by the RTX 5080 Mobile's ability to render the game at high settings. The CPU's strong multi-threaded performance ensures that it does not hold the GPU back, allowing the system to achieve its full potential. This is reflected in the high frame rates at 1080p, where the combo ranks higher than many other systems that may have a stronger GPU but a weaker CPU. Overall, the rank of 1024 is a strong indicator that this combo is well-balanced for Palworld, offering a high-performance experience that is rare in the mobile segment.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the system's performance across all combinations of resolution and settings. At 1920x1080, the system achieves its highest frame rates. The Low preset delivers an average of 244 FPS, which is exceptionally high and indicates a very light GPU load. The Medium preset averages 198 FPS, with a minimum of 168 FPS and a maximum of 228 FPS, showing a consistent performance range. The High preset averages 152 FPS, and the Ultra preset averages 116 FPS. The scaling from Low to Ultra at 1080p shows a 52.5% reduction in frame rate, which is entirely due to the increasing GPU workload from higher graphical settings.

At 2560x1440, the frame rates are lower but still very playable. The Low preset averages 161 FPS, which is still high enough for most high-refresh-rate monitors. The Medium preset averages 130 FPS, with a minimum of 111 FPS and a maximum of 150 FPS. The High preset averages 100 FPS, and the Ultra preset averages 76 FPS. The drop from 1080p to 1440p at each setting is consistent, averaging around 34%, which aligns with the increased pixel count. The 1440p results are particularly impressive, as even the Ultra preset maintains a 76 FPS average, making it a viable option for players who want high visual quality without sacrificing too much performance.

At 3840x2160, the GPU is clearly the limiting factor. The Low preset averages 89 FPS, which is the only 4K setting that exceeds 60 FPS. The Medium preset averages 72 FPS, with a minimum of 62 FPS and a maximum of 83 FPS, keeping the experience mostly smooth. The High preset averages 56 FPS, which is below the 60 FPS target and may result in noticeable stutters on some displays. The Ultra preset averages 42 FPS, which is a significant drop and is best reserved for static scenes or for players who prioritize image quality over frame rate. The data shows that for 4K gaming, the Medium preset is the recommended choice, as it provides a playable frame rate while retaining a reasonable level of visual fidelity. The complete breakdown across all 12 measured configurations highlights the system's versatility, with performance ranging from 244 FPS at 1080p Low to 42 FPS at 4K Ultra, giving users clear guidance on how to tune the game for their preferred balance of speed and quality.

Hardware Specifications

Intel Core Ultra 7 165H

Cores / Threads 16 / 22
Base Clock 3800 MHz
Boost Clock 5000 MHz
TDP 28W
Socket Intel BGA 2049
View Full CPU Details →

NVIDIA GeForce RTX 5080 Mobile

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 1500 MHz MHz
TDP 80 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 165H + NVIDIA GeForce RTX 5080 Mobile in Palworld

Resolution Settings Avg FPS
3840x2160 Low 89.0
3840x2160 Medium 72.0
3840x2160 High 56.0
3840x2160 Ultra 42.0
2560x1440 Low 161.0
2560x1440 Medium 130.0
2560x1440 High 100.0
2560x1440 Ultra 76.0
1920x1080 Low 244.0
1920x1080 Medium 198.0
1920x1080 High 152.0
1920x1080 Ultra 116.0

Palworld with iUltra 7 165H + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Other Games with iUltra 7 165H + RTX 5080 Mobile

Explore FPS benchmarks for other games using this same hardware combination.