Palworld

Palworld pairs the AMD Ryzen 5 7400F with the NVIDIA GeForce RTX 4070 SUPER to deliver a combination that scales predictably across resolutions, but the data reveals a clear shift in bottleneck behavior. At 1080p, the system is heavily CPU-limited, producing high frame rates that do not translate proportionally to higher resolutions. The measured FPS breakdown shows that at 1920x1080 with Low settings, the combo achieves a 276 FPS average, but this drops to 182 FPS at 2560x1440 and 101 FPS at 3840x2160. This represents a 34% reduction from 1080p to 1440p and a further 44% reduction from 1440p to 4K, indicating that while the GPU is capable, the CPU’s six cores and twelve threads are the primary drivers of performance at lower resolutions. At 4K, the frame rate at High settings falls to 63 FPS, which is a 63% drop from the 1080p High result of 172 FPS, showing that the GPU becomes the limiting factor only when pixel count increases dramatically. The benchmark results indicate that this combo is best suited for high-refresh-rate 1440p gaming, where it maintains a 113 FPS average at High settings, rather than pushing for 4K Ultra, which yields only 48 FPS.

Resolution Scaling

The resolution scaling data for Palworld shows a steep performance curve that highlights the system’s dual bottlenecks. From 1080p to 1440p, the average FPS at High settings falls from 172 to 113, a 34.3% decrease. This is a substantial drop, suggesting that the GPU is beginning to take on more load, but the CPU still has headroom to push higher frame rates if the GPU could keep up. The transition from 1440p to 4K is even more severe, with High settings dropping from 113 to 63 FPS, a 44.2% reduction. This pattern indicates that at 4K, the RTX 4070 SUPER’s 12 GB of GDDR6X memory and 192-bit bus are being fully utilized, and the GPU becomes the definitive bottleneck, as the frame rate scales almost linearly with pixel count.

Looking at the Low settings across resolutions provides a clearer picture of the CPU’s capabilities. At 1080p Low, the combo hits 276 FPS, which is an exceptionally high number, far exceeding the refresh rate of most monitors. Dropping to 1440p Low yields 182 FPS, a 34% decrease, and 4K Low produces 101 FPS, another 44% decrease. This consistent scaling pattern across settings suggests that the CPU is capable of driving very high frame rates, but the GPU’s raw pixel throughput limits the system once the resolution increases. The data shows that the 7400F’s Zen 4 architecture, with a boost clock of 4.70 GHz, provides ample single-thread performance for Palworld’s world simulation, but the GPU’s 35.48 TFLOPS of FP32 compute is the primary constraint at higher resolutions.

The Medium settings data, which includes min and max FPS values, offers additional insight into frame time consistency. At 1080p Medium, the average is 224 FPS with a min of 190 and max of 258, showing a 68 FPS range. At 1440p Medium, the average drops to 147 FPS with a min of 125 and max of 170, a 45 FPS range. At 4K Medium, the average is 82 FPS with a min of 70 and max of 94, a 24 FPS range. This narrowing range at higher resolutions indicates that the GPU is smoothing out frame delivery as it becomes the bottleneck, reducing the impact of CPU-side spikes. The 4K Ultra result of 48 FPS is the lowest in the dataset and falls below the 60 FPS threshold, making it unsuitable for smooth gameplay at maximum settings.

GPU Role

The NVIDIA GeForce RTX 4070 SUPER plays a critical role in this combo, particularly at higher resolutions where its 12 GB of GDDR6X memory and 504.2 GB/s of bandwidth are fully exercised. The GPU’s boost clock of 2475 MHz and base clock of 1980 MHz, combined with 7168 shading units, deliver strong raw performance that is reflected in the 4K High result of 63 FPS. This is a playable frame rate for a survival game, but it is not high enough for competitive play. The GPU’s 80 ROPs and 224 TMUs directly influence the pixel and texture fill rates, which are 198.0 GPixel/s and 554.4 GTexel/s respectively, and these metrics are key to understanding why the 4K Ultra setting drops to 48 FPS. The jump from High to Ultra at 4K represents a 23.8% performance hit, from 63 to 48 FPS, showing that the Ultra preset includes effects that are particularly demanding on the GPU’s compute units.

The GPU’s memory configuration is another limiting factor. With a 192-bit bus width and 12 GB of VRAM, the RTX 4070 SUPER is well-suited for 1440p gaming, where it achieves 113 FPS at High settings, but it struggles to maintain high frame rates at 4K with maximum settings. The 4K Ultra result of 48 FPS indicates that the memory bandwidth is insufficient to feed the GPU’s compute units efficiently at that resolution. The GPU’s nearest rivals, including the NVIDIA Quadro M6000 24 GB and the GeForce RTX 5050 Mobile, show similar average benchmark scores, with the RTX 4070 SUPER sitting at a deltaPct of -0.1% to -1% relative to these cards. This places it in the 83rd percentile of all GPUs, indicating strong performance but not top-tier.

In Palworld specifically, the GPU’s role is less about raw compute and more about memory bandwidth and rasterization. The game’s open-world environment with many dynamic objects and lighting effects puts a premium on pixel fill rate. The 4K Medium result of 82 FPS, with a min of 70 FPS, shows that the GPU can maintain a stable frame rate when settings are adjusted, but the Ultra preset’s additional post-processing effects push the system over the edge. The data suggests that for 4K gaming, users should stick to High settings to stay above 60 FPS, while 1440p High is the sweet spot for this GPU, delivering 113 FPS with plenty of headroom.

CPU Role

The AMD Ryzen 5 7400F is a six-core, twelve-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 4.70 GHz. Its role in Palworld is primarily to handle the game’s simulation and physics, which are CPU-intensive tasks. The benchmark results show that at 1080p, the CPU is the primary bottleneck, as the frame rate at Low settings reaches 276 FPS, which is far higher than what the GPU can deliver at higher resolutions. This indicates that the 7400F’s single-thread performance, evidenced by its Cinebench R23 single-core score of 3072, is more than sufficient for the game’s logic. The CPU’s 32 MB of shared L3 cache also helps with the game’s asset streaming, reducing stuttering.

Comparing the 7400F to its nearest rivals, it sits in the 83rd percentile of all CPUs, with an average benchmark score of 32750. Its closest competitor, the Intel Core i5-14600T, has an average score of 32707, a deltaPct of 0.1%, meaning the 7400F is essentially tied with it. The AMD Ryzen 7 PRO 6850H is slightly faster with a score of 32812, a deltaPct of -0.2%, while the AMD Ryzen AI 7 PRO 360 is slightly slower with a score of 32662, a deltaPct of 0.3%. This places the 7400F in a highly competitive mid-range segment, but its 6-core/12-thread configuration is a key differentiator in Palworld. The game may not fully utilize all 12 threads, but the high boost clock ensures that the primary game thread runs efficiently.

The CPU’s impact on the measured FPS is most evident when comparing Low and High settings at the same resolution. At 1080p, Low yields 276 FPS, while High yields 172 FPS, a 37.7% decrease. This suggests that the High preset adds GPU-side effects that reduce the frame rate, but the CPU is still capable of pushing higher numbers if the GPU were not the constraint. At 1440p, the gap narrows: Low yields 182 FPS, and High yields 113 FPS, a 37.9% decrease. At 4K, Low yields 101 FPS, and High yields 63 FPS, a 37.6% decrease. This consistent percentage drop across resolutions indicates that the CPU’s performance is not the limiting factor; rather, the GPU’s ability to render additional effects is the constraint. The 7400F’s 65W TDP and 5 nm process node also contribute to efficient operation, allowing the CPU to sustain boost clocks without thermal throttling.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Palworld?

A: The data shows that 2560x1440 with High settings is the optimal balance, yielding 113 FPS average. This resolution avoids the CPU bottleneck at 1080p and the GPU bottleneck at 4K, providing a smooth experience with good visual quality.

Q: Can this combo handle 4K gaming in Palworld?

A: Yes, but with limitations. At 4K High, the average FPS is 63, which is playable, but 4K Ultra drops to 48 FPS, which is below the 60 FPS threshold. For 4K, Medium settings provide 82 FPS with a min of 70 FPS, making it the recommended preset for stable performance.

Q: How does the Ryzen 5 7400F compare to its nearest rivals?

A: The 7400F has an average benchmark score of 32750, placing it in the 83rd percentile. It is 0.1% faster than the Intel Core i5-14600T, 0.2% faster than the Intel Core Ultra 7 155H, and 0.3% faster than the AMD Ryzen AI 7 PRO 360, but 0.2% slower than the AMD Ryzen 7 PRO 6850H.

Q: Is the RTX 4070 SUPER a bottleneck at 1080p?

A: No, the CPU is the bottleneck at 1080p. The data shows that at 1080p Low, the combo achieves 276 FPS, which is far higher than at 1440p (182 FPS) or 4K (101 FPS). This indicates the GPU has headroom at 1080p, but the CPU cannot push higher frame rates due to game logic limits.

Q: What is the frame time consistency like at different settings?

A: The Medium settings data provides min and max FPS values. At 1080p, the range is 190-258 FPS, at 1440p it is 125-170 FPS, and at 4K it is 70-94 FPS. The narrowing range at higher resolutions indicates that the GPU bottleneck leads to more consistent frame delivery.

Q: How does this combo rank among all tested combos for Palworld?

A: The combo ranks 467th out of 2944 tested combinations, placing it in the top 15.9% of all systems tested. This is a strong result, indicating that this CPU-GPU pairing is well-suited for Palworld, despite not being in the top tier.

How This Combo Ranks

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4070 SUPER combination ranks 467th out of 2944 tested combos for Palworld, placing it in the top 15.9% of all systems. This is a strong ranking, but it is not exceptional, as many higher-end GPUs and CPUs achieve better performance. The rank reflects the balance between the CPU’s strong single-thread performance and the GPU’s 12 GB memory capacity. In the context of Palworld, this rank indicates that the combo is capable of delivering high frame rates at 1440p, but it is not optimized for 4K Ultra settings. The 467th rank suggests that there are 466 other combos that can achieve higher frame rates, likely due to more powerful GPUs like the RTX 4090 or CPUs with higher core counts.

The combo’s rank is influenced by the GPU’s 83rd percentile standing among all GPUs, which is solid but not top-tier. The RTX 4070 SUPER’s nearest rivals, such as the Quadro M6000 24 GB and RTX 4090 Mobile, have similar average scores, indicating that the GPU is in a competitive tier. However, the CPU’s 83rd percentile ranking is also not exceptional, with rivals like the Ryzen 7 PRO 6850H being slightly faster. This means the combo is well-matched, but it does not have the raw horsepower to push into the top 100. For Palworld specifically, the rank of 467 out of 2944 reflects the combo’s efficiency, as it delivers high frame rates without the extreme power consumption of flagship parts. The data shows that this combo is a strong mid-range choice for Palworld, offering a good balance of price and performance, though users seeking maximum frame rates at 4K may need to look at higher-tier options.

Measured FPS Breakdown

The measured FPS data for Palworld with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4070 SUPER is as follows, organized by resolution and settings:

3840x2160 (4K):

• High: 63 FPS average
• Low: 101 FPS average
• Medium: 82 FPS average, with a min of 70 FPS and max of 94 FPS
• Ultra: 48 FPS average

2560x1440 (1440p):

• High: 113 FPS average
• Low: 182 FPS average
• Medium: 147 FPS average, with a min of 125 FPS and max of 170 FPS
• Ultra: 86 FPS average

1920x1080 (1080p):

• High: 172 FPS average
• Low: 276 FPS average
• Medium: 224 FPS average, with a min of 190 FPS and max of 258 FPS
• Ultra: 131 FPS average

These numbers reveal several key trends. First, the Low settings produce the highest frame rates at every resolution, as expected, but the gap between Low and High is consistent at around 37-38%, regardless of resolution. This suggests that the High preset adds a fixed amount of GPU work that is proportional to the base render load. Second, the Ultra preset is significantly more demanding than High, with a 24% performance drop at 4K (63 to 48 FPS) and a similar drop at 1440p (113 to 86 FPS) and 1080p (172 to 131 FPS). This indicates that Ultra includes effects like advanced shadows and ambient occlusion that heavily tax the GPU.

Third, the Medium settings provide the best balance for frame time consistency, as evidenced by the min and max FPS values. At 1080p, the 190-258 FPS range shows some variance, but at 4K, the 70-94 FPS range is much tighter, indicating that the GPU is the bottleneck and delivering more stable performance. Finally, the data shows that this combo is capable of hitting 60+ FPS at 4K with High settings, but not Ultra. For users who prioritize smoothness, 1440p High at 113 FPS is the recommended configuration, as it offers a 79% higher frame rate than 4K High while maintaining high visual fidelity. The 1080p results are exceptionally high, with 276 FPS at Low, making this combo ideal for esports-style play in Palworld’s less demanding moments.