Palworld

The AMD Ryzen 5 5600 and AMD Radeon RX 6600 pairing delivers a highly capable 1080p experience in Palworld, but it struggles to maintain playable frame rates at 4K. Benchmark data shows a clear pattern: the system excels at 1080p with all settings, offers a solid 1440p experience on medium to high presets, and falls below the 60 FPS threshold at 4K, indicating the GPU becomes the primary limiting factor as resolution increases.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The system achieves an average of 86.9 FPS at 1920x1080 with High settings, which is comfortably above the 60 FPS target for smooth gameplay.

Q: How does the CPU's multi-threaded performance compare to its nearest rivals?

A: The Ryzen 5 5600 scores 18,309 in Cinebench R23 multi-core. This places it 0.6% ahead of the Intel Xeon D-1746TER (21,635 average) and 0.6% behind the AMD EPYC 9554P (21,899 average), showing near-identical performance to these server-class chips.

Q: Is the RX 6600's 8 GB VRAM sufficient for Palworld at 4K?

A: The data indicates VRAM is not the primary constraint at 4K, as the RX 6600 averages 34 FPS on High settings. However, the significant frame rate drop from 48.8 FPS at Low to 25.9 FPS at Ultra suggests the GPU's compute capacity is the bottleneck rather than memory capacity in this scenario.

Q: What 1440p settings provide the best balance of performance and quality?

A: Medium settings at 2560x1440 deliver 76.1 FPS average, while High settings drop to 59.5 FPS. For a consistent 60+ FPS experience, Medium is the recommended preset at this resolution.

Q: Where does this combo rank among all tested combinations?

A: The Ryzen 5 5600 + RX 6600 combination ranks 1,360 out of 1,718 tested combos in Palworld, placing it in the lower-middle tier of all systems benchmarked for this game.

Q: How much faster is the CPU at single-threaded workloads compared to its multi-threaded score?

A: The CPU scores 2,584 in Cinebench R23 single-core versus 18,309 in multi-core, meaning the multi-core score is roughly 7.1 times higher, reflecting the 6-core, 12-thread configuration scaling well across cores.

GPU Role

The AMD Radeon RX 6600, built on the RDNA 2.0 architecture with a Navi 23 chip, serves as the primary rendering engine for Palworld. Its 8 GB of GDDR6 memory on a 128-bit bus provides 224.0 GB/s of bandwidth, which is sufficient for the game's texture-heavy environments at 1080p and 1440p. The GPU's boost clock of 2491 MHz and game clock of 2044 MHz allow it to maintain high throughput during extended play sessions.

The GPU's role becomes increasingly dominant as resolution scales up. At 1080p Low settings, the system achieves 140 FPS, which is nearly double the 4K Low result of 48.8 FPS. This 2.87x performance gap shows the RX 6600's compute resources (8.928 TFLOPS FP32) are heavily taxed at higher resolutions. The pixel rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s are adequate for 1080p but insufficient to keep up with the pixel count at 4K.

The GPU's DirectX 12 Ultimate support ensures compatibility with Palworld's modern rendering features, but the measured frame rates indicate that the 1792 shading units become the limiting factor at Ultra settings, where the 4K average drops to 25.9 FPS. This is further evidenced by the GPU's benchmark scores, including a PassMark G3D score of 15,096 and a 3DMark Steel Nomad DX12 score of 1,492, which position it in the 69th percentile of all GPUs.

Resolution Scaling

The performance scaling from 1080p to 4K clearly identifies the GPU as the limiting component in this system. At High settings, the average frame rate drops from 86.9 FPS at 1080p to 59.5 FPS at 1440p, a 31.5% reduction, and then further to 34 FPS at 4K, a 60.9% reduction from the 1440p figure. This non-linear scaling pattern is characteristic of a GPU-bound scenario where the RX 6600's 8.928 TFLOPS of compute power cannot keep pace with the 4x increase in pixel count from 1080p to 4K.

The Low settings preset shows the most dramatic scaling, with 140 FPS at 1080p dropping to 93.7 FPS at 1440p and then to 48.8 FPS at 4K. Even at the lowest quality preset, the 4K result falls below the 60 FPS target, confirming that the GPU is the bottleneck. Conversely, the CPU's role diminishes at higher resolutions, as the Ryzen 5 5600's 6 cores and 12 threads are more than adequate to feed the GPU at 1080p, evidenced by the 140 FPS Low result.

The Ultra preset exhibits the steepest drop, going from 68.9 FPS at 1080p to 45.2 FPS at 1440p and 25.9 FPS at 4K. This suggests that the extra shading and texture work required by the Ultra preset overwhelms the GPU's 112 texture mapping units and 64 raster operation units at higher resolutions. The data consistently shows that any 4K gaming requires a more powerful GPU than the RX 6600.

How This Combo Ranks

The Ryzen 5 5600 + RX 6600 combination ranks 1,360 out of 1,718 tested combos in Palworld, placing it in the bottom 21% of all systems benchmarked. This ranking is surprising given the individual component performance: the CPU sits in the 79th percentile of all processors, and the GPU ranks in the 69th percentile of all graphics cards. The discrepancy between component-level and system-level rankings suggests that Palworld is particularly demanding on the GPU, and the RX 6600's mid-range positioning holds back the combo.

The CPU's nearest rivals include the Intel Xeon D-1746TER (0.6% higher average score), AMD EPYC 9554P (0.6% lower), and Intel Core i7-11700F (0.9% lower), indicating the Ryzen 5 5600 is well-matched to these higher-tier processors. However, the GPU's nearest rivals, including the AMD Radeon 890M (0% delta), RX 580 2048SP (0.2% lower), and RTX 3060 Ti (0.5% higher), show that the RX 6600 is surrounded by similarly performing options. The combination of a top-tier mid-range CPU with a mid-range GPU results in a system that is CPU-overpowered for the GPU's capabilities in Palworld.

This ranking implies that users upgrading from this setup would benefit more from a GPU upgrade than a CPU upgrade. The CPU's headroom, demonstrated by its Cinebench R23 multi-core score of 18,309, suggests it could support a significantly faster GPU without becoming a bottleneck.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance across all settings. Low settings produce an average of 140 FPS, Medium achieves 112.5 FPS, High reaches 86.9 FPS, and Ultra manages 68.9 FPS. All four presets exceed the 60 FPS threshold, making 1080p the optimal resolution for this combo. The 2.03x difference between Low and Ultra (140 vs 68.9 FPS) shows how much headroom the GPU has at this resolution.

At 2560x1440, performance remains respectable but begins to show strain. Low settings average 93.7 FPS, Medium drops to 76.1 FPS, High falls to 59.5 FPS, and Ultra dips to 45.2 FPS. The transition from Medium to High crosses the 60 FPS boundary, indicating that High settings at 1440p require compromises for smooth gameplay. The 2.07x scaling from Low to Ultra at this resolution mirrors the 1080p pattern, suggesting consistent GPU utilization.

At 3840x2160, all settings fall below the 60 FPS target. Low averages 48.8 FPS, Medium achieves 41.7 FPS, High reaches 34 FPS, and Ultra bottoms out at 25.9 FPS. The 1.88x scaling from Low to Ultra is slightly compressed compared to lower resolutions, indicating the GPU is fully saturated even at Low settings. These numbers confirm that 4K gaming is not viable with this hardware combination in Palworld.

Settings Recommendations

For the best experience, the data strongly favors 1080p with High settings, which delivers 86.9 FPS average. This preset provides a significant visual upgrade over Medium (112.5 FPS) while maintaining a frame rate well above the 60 FPS target. Users prioritizing maximum smoothness should select Low settings at 1080p for 140 FPS, but the visual fidelity loss is substantial for only a 61% frame rate increase.

At 1440p, Medium settings at 76.1 FPS is the recommended balance, as it is the only preset above 60 FPS at this resolution. High settings at 59.5 FPS are borderline playable, but the slight frame rate dip below 60 FPS may cause noticeable stuttering on standard 60 Hz monitors. Ultra settings at 45.2 FPS should be avoided unless visual quality is paramount and frame rate consistency is secondary.

For 4K, no preset is recommended for competitive or action-heavy gameplay. The highest average, 48.8 FPS at Low settings, is below the 60 FPS threshold, and the frame rate drops to 25.9 FPS at Ultra. Users with 4K displays should consider lowering the rendering resolution to 1440p and using upscaling, though such features are not measured in this dataset. The 1080p Medium preset at 112.5 FPS offers the best combination of high frame rates and moderate visual quality for users who want a smooth, responsive experience.

CPU Role

The AMD Ryzen 5 5600, with its 6 cores and 12 threads based on the Zen 3 architecture, provides ample processing power for Palworld. Its boost clock of 4.40 GHz and base clock of 3.50 GHz, combined with 32 MB of shared L3 cache, ensure that the CPU is never the limiting factor in this game at any resolution. The Cinebench R23 multi-core score of 18,309 and single-core score of 2,584 demonstrate strong performance for both multi-threaded workloads and single-threaded game logic.

The CPU's 79th percentile ranking among all processors, with an average benchmark score of 21,765, places it above many higher-core-count alternatives. Its nearest rivals, including the Intel Core i7-11700F (0.9% lower average score), show that the Ryzen 5 5600 competes favorably with Intel's mid-range offerings. The 3DMark scores further validate its capabilities: 5,641 in the 16-thread test and 882 in single-thread, indicating consistent performance across varying thread counts.

In Palworld specifically, the CPU's role is to handle game logic, physics, and entity management. The measured FPS at 1080p Low (140 FPS) suggests the CPU can process frames much faster than the GPU can render them, as the GPU's maximum output at this resolution is the limiting factor. The 12 threads provide sufficient parallelism for the game's survival mechanics, which often involve numerous simultaneous calculations for world state and AI. The CPU's 65 W TDP and support for DDR4 memory with 51.2 GB/s bandwidth further ensure it does not introduce memory-related bottlenecks, allowing the GPU to operate at full capacity.