Palworld
This combination provides smooth gameplay with an average of 63 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 30 | 38 | 47 |
| 1440p QHD | 40 | 53 | 69 | 85 |
| 1080p Full HD | 61 | 81 | 105 | 130 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 5 3600 + Intel Arc B570, In-Depth Analysis
Palworld with an AMD Ryzen 5 3600 and Intel Arc B570 presents a specific performance profile that hinges heavily on resolution and preset selection. The measured data shows a system capable of smooth 1080p play, but one that struggles to maintain playable frame rates at 4K, particularly on higher presets. This analysis breaks down the measured results to explain where the bottleneck lies and how to configure the game for the best experience.
Resolution Scaling
The frame rate drop from 1080p to 4K is dramatic and reveals a system that becomes GPU-bound at higher resolutions. At High settings, the average FPS falls from 81 at 1920x1080 to 53 at 2560x1440, a 35% reduction, and then plummets to just 30 at 3840x2160, which is a 63% drop from the 1080p result. This steep decline indicates that the Intel Arc B570 is the primary limiting factor as pixel count increases; the GPU simply runs out of throughput to maintain the same level of performance.
The scaling pattern across all presets confirms this. At Low settings, the system goes from 130 FPS at 1080p down to 85 at 1440p and 47 at 4K. Even at the lowest preset, the 4K result is below the 60 FPS threshold that most players consider smooth. The Medium preset shows a consistent trend, with average FPS of 105 at 1080p, 69 at 1440p, and 38 at 4K. At Ultra, the situation is worse, with frame rates of 61, 40, and 22 at 1080p, 1440p, and 4K respectively. The 4K Ultra result of 22 FPS is essentially unplayable, confirming that this combination is not suited for 4K gaming in Palworld.
The data suggests that 1080p is the sweet spot for this combo, as even the Ultra preset manages an average of 61 FPS. Moving to 1440p requires a careful choice of preset, as High (53 FPS) and Medium (69 FPS) are the only options that approach playability, while Ultra falls to 40 FPS. At 4K, the system is consistently below playable thresholds, with even Low settings yielding only 47 FPS. This is a clear case of the GPU being the limiting component at 1440p and 4K, whereas at 1080p, the Ryzen 5 3600 is more likely to be the constraint, allowing the GPU to stretch its legs.
GPU Role
The Intel Arc B570, with its 10 GB of GDDR6 memory on a 160-bit bus, provides 380.0 GB/s of bandwidth. This memory configuration is sufficient for 1080p and most 1440p scenarios in Palworld, but the 4K results suggest that the GPU's raw compute power, not the memory capacity, is the bottleneck. The card's boost clock is listed as 2500 MHz, and its FP32 performance is 11.52 TFLOPS, which places it in the mid-range tier. The measured frame rates at 4K, where the GPU is heavily stressed, show that this level of compute is not enough to drive Palworld at that resolution with high visual fidelity.
The GPU's benchmark scores position it competitively. Its average benchmark score of 20556 puts it at the 65th percentile of all GPUs. Its nearest rival, the Intel Arc A750, has an average score of 20582, a delta of -0.1%, indicating near-identical performance. The NVIDIA GeForce RTX 3070 Mobile is also a close match, with a score of 20534 and a delta of 0.1%. This suggests that the B570's performance in synthetic benchmarks translates to real-world results that are comparable to these products, which are typically considered capable 1080p and entry-level 1440p cards. In Palworld, the 1440p High result of 53 FPS aligns with this positioning, showing the GPU can handle the game at that setting, but with no headroom for higher presets or resolution scaling.
The VRAM capacity of 10 GB is not directly indicated as a problem in the measured data, as frame rates scale predictably with resolution, but it is a factor to consider for future titles or if texture quality demands increase. For Palworld, the GPU's role is clear: it delivers excellent 1080p performance, acceptable 1440p performance on Medium or High, and insufficient performance at 4K. The card's 150 W TDP and dual-slot design are typical for this class, and its PCIe 4.0 x8 interface is adequate.
Settings Recommendations
Based on the measured rows, the best experience is achieved at 1920x1080 with the High preset, which delivers an average of 81 FPS. This provides a smooth, responsive experience with good visual quality. The Medium preset at the same resolution offers a higher average of 105 FPS, with a minimum of 89 FPS, which is also excellent for competitive play or if you prefer higher frame rates. The Low preset at 1080p hits 130 FPS, which is ideal for maximum responsiveness, but the visual compromise is significant. The Ultra preset at 1080p, with an average of 61 FPS, is playable but not optimal, as the drop below 60 FPS in demanding scenes could cause noticeable stutter.
At 2560x1440, the Medium preset is the recommended choice, providing an average of 69 FPS with a minimum of 59 FPS. This is the only preset that consistently stays above the 60 FPS threshold. The High preset at 1440p, with an average of 53 FPS, is acceptable if you prefer higher visual fidelity and can tolerate occasional dips. The Low preset at 1440p (85 FPS) is overkill for a smooth experience, and the Ultra preset (40 FPS) is not recommended due to poor frame pacing.
For 3840x2160, the data shows that no preset provides a truly playable experience. The Low preset, with an average of 47 FPS, is the only option that approaches playability, but it will feel choppy in action-heavy moments. The Medium preset averages 38 FPS, and High and Ultra are below 30 FPS. The recommendation is to avoid 4K with this combo, or to accept significant visual compromises and lower internal resolution scaling if the game supports it. The optimal balance of visual quality and performance is clearly at 1080p, where the system has the most headroom.
How This Combo Ranks
The combination of the Ryzen 5 3600 and Arc B570 ranks 2362 out of 2944 tested combos in Palworld. This places it in the bottom 20% of all configurations, which is a direct consequence of the GPU's limitations at higher resolutions. This rank is a global measure across all tested hardware pairings, so it includes top-tier CPUs and GPUs that achieve much higher frame rates. The rank indicates that while this combo is perfectly capable for 1080p gaming, it is not competitive with higher-end systems in absolute performance terms.
The ranking also reflects the CPU's position in the hierarchy. The Ryzen 5 3600 has a percentile of 71 versus all CPUs, meaning it outperforms 71% of CPUs in general benchmarks. Its average benchmark score of 17035 is nearly identical to its nearest rivals, such as the Intel Core i7-1260P (17007, delta 0.2%) and the Intel Core i5-11400 (17067, delta -0.2%). This shows that the CPU is a solid mid-range performer that is not the primary cause of the low combo rank. Instead, the Arc B570, with its 65th percentile ranking among GPUs, holds the system back in a game like Palworld that is graphically demanding. The combo rank is a reflection of the GPU's performance ceiling, not a deficiency in the CPU.
CPU Role
The AMD Ryzen 5 3600, a 6-core, 12-thread processor based on the Zen 2 architecture, provides a solid foundation for gaming. Its base clock of 3.60 GHz and boost clock of 4.20 GHz, combined with 32 MB of shared L3 cache, deliver strong single-threaded performance. In Palworld, which is a CPU-intensive survival game with many simulated entities, the CPU's multi-threading capabilities are also relevant. The Cinebench R23 multicore score of 15045 and single-core score of 2124 indicate that the CPU can handle the game's logic and physics calculations without becoming a major bottleneck at lower resolutions.
At 1080p, the CPU's role is more prominent. The frame rates at High (81 FPS) and Low (130 FPS) suggest that the CPU can feed the GPU effectively, but the scaling from Low to Ultra shows a 53% drop in frame rate, which is more attributable to GPU load. The 3DMark single-thread score of 696 and 2-thread score of 1361 show that the CPU has adequate single-core performance for gaming, but it is not a top-tier part. The PassMark multithread score of 17700 reflects its 12-thread capability, which is beneficial for background tasks and games that use multiple cores.
The CPU's memory bandwidth of 51.2 GB/s via dual-channel DDR4 is sufficient for this GPU. The data indicates that the Ryzen 5 3600 is not the limiting factor in this combo at 1440p and 4K, as the frame rates drop uniformly with resolution, a hallmark of GPU limitation. At 1080p, the CPU is likely capable of pushing higher frame rates than the GPU can render on Ultra, but it is not holding the system back in a way that would suggest an upgrade is necessary for Palworld. The CPU's performance is well-matched to the GPU's capabilities, ensuring that the GPU is the primary bottleneck at higher resolutions.
FAQ
Q: What is the best resolution to play Palworld with this CPU and GPU combo?
A: The data shows that 1920x1080 is the only resolution where all presets are playable, with High and Medium settings providing 81 and 105 FPS respectively. At 2560x1440, only Medium (69 FPS) and High (53 FPS) are acceptable, while 4K is not recommended as even Low settings only reach 47 FPS.
Q: Should I use the Ultra preset at 1080p?
A: The Ultra preset at 1080p yields an average of 61 FPS, which is technically playable but leaves no headroom for demanding scenes. The High preset at 81 FPS provides a better balance of visual quality and performance, making it the recommended choice for a consistently smooth experience.
Q: Is the CPU or GPU the bottleneck in this system?
A: At 1440p and 4K, the GPU is clearly the bottleneck, as frame rates drop dramatically with increasing resolution. At 1080p, the CPU is more involved, but its performance is sufficient to feed the GPU effectively, as shown by the high frame rates on Low and Medium settings.
Q: How does the Intel Arc B570 compare to its nearest rivals?
A: The Arc B570 has an average benchmark score of 20556, which is within 0.2% of the Intel Arc A750 (20582) and NVIDIA GeForce RTX 3070 Mobile (20534). This indicates very similar performance levels among these GPUs.
Q: Can this combo handle 1440p gaming?
A: Yes, but only with specific settings. The Medium preset at 2560x1440 provides an average of 69 FPS with a minimum of 59 FPS, making it the best option. High settings average 53 FPS, which is acceptable, but Ultra settings drop to 40 FPS and are not recommended.
Q: What is the performance ranking of this combo among all tested systems?
A: The Ryzen 5 3600 and Arc B570 combination ranks 2362 out of 2944 tested combos in Palworld. This places it in the lower percentile overall, primarily due to the GPU's limitations at higher resolutions, despite the CPU being a competent mid-range performer.
Hardware Specifications
AMD Ryzen 5 3600
Intel Arc B570
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + Intel Arc B570 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 47.0 |
| 3840x2160 | Medium | 38.0 |
| 3840x2160 | High | 30.0 |
| 3840x2160 | Ultra | 22.0 |
| 2560x1440 | Low | 85.0 |
| 2560x1440 | Medium | 69.0 |
| 2560x1440 | High | 53.0 |
| 2560x1440 | Ultra | 40.0 |
| 1920x1080 | Low | 130.0 |
| 1920x1080 | Medium | 105.0 |
| 1920x1080 | High | 81.0 |
| 1920x1080 | Ultra | 61.0 |
Palworld with Ryzen 5 3600 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with Arc B570 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + Arc B570
Explore FPS benchmarks for other games using this same hardware combination.