Palworld
This combination provides smooth gameplay with an average of 105 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 49 | 63 | 78 |
| 1440p QHD | 67 | 88 | 114 | 141 |
| 1080p Full HD | 101 | 134 | 174 | 211 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis
How This Combo Ranks
The pairing of the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 3070 Ti lands at rank 1363 out of 3711 tested combos in Palworld. That places this configuration in the upper-middle tier of the database, meaning it outperforms the majority of systems tested while still leaving headroom above it. The data shows this combo is positioned around the 63rd percentile of all tested pairings, which is a solid standing for a system built around a CPU from 2018 and a GPU from 2021.
What is striking is the delta between the two components' individual standings. The RTX 3070 Ti sits at the 75th percentile among all GPUs, while the Ryzen 5 2600 also holds the 75th percentile among all CPUs. Yet the combined result rank of 1363 out of 3711 suggests the pairing works well together in Palworld specifically, rather than being held back by either component's absolute performance ceiling. The combo rank implies that in this title, the two parts complement each other effectively, with neither completely bottlenecking the other across all settings.
The measured frames per second data reinforces this interpretation. At 1080p, the combo delivers playable to very smooth results across all presets, from 101 FPS at Ultra to 211 FPS at Low. That spread indicates the system can handle the game's demands without falling into single-digit stutters, even at maximum quality. Stepping to 1440p, the numbers remain strong, with a high of 141 FPS at Low and a low of 67 FPS at Ultra. The 4K results show the first signs of strain, with Ultra dropping to 37 FPS and High at 49 FPS, but Low still manages a respectable 78 FPS.
GPU Role
The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with the GA104 chip, fabricated on an 8 nm process from Samsung. The GPU packs 6144 shading units, 192 texture mapping units, and 96 raster output pipelines. The memory subsystem consists of 8 GB of GDDR6X on a 256-bit bus, delivering 608.3 GB/s of bandwidth. Clock speeds start at 1575 MHz base and boost up to 1770 MHz, with memory running at an effective 19 Gbps.
In Palworld, the GPU's role is clearly dominant at higher resolutions. The measured FPS data shows that moving from 1080p to 4K at any given preset results in a substantial drop, which is the hallmark of a GPU-bound scenario. For instance, at High settings, the average FPS falls from 134 at 1080p to 88 at 1440p and then to 49 at 4K. This scaling pattern indicates that the RTX 3070 Ti's raw throughput and memory bandwidth are the primary drivers of performance at 1440p and above.
The VRAM allocation of 8 GB is worth noting. Palworld is an open-world survival title that can be memory-hungry at higher resolutions and settings. The 4K Ultra result of 37 FPS suggests that the GPU is hitting both compute and memory limits simultaneously. However, the 4K Low result of 78 FPS shows that when the settings dial back the demands, the GPU still has plenty of headroom. The benchmark results indicate that the RTX 3070 Ti is capable of delivering smooth frame rates in this game, provided the resolution and preset are chosen with its 8 GB frame buffer in mind.
The GPU's compute capabilities are substantial, with a FP32 throughput of 21.75 TFLOPS and 192 tensor cores alongside 48 RT cores. These specifications suggest the card has the hardware to handle modern rendering techniques, though Palworld's specific implementation will dictate how much of that power is utilized. The measured data shows that the GPU is the star of this combo, with its performance scaling predictably as resolution increases.
Resolution Scaling
The benchmark results reveal a clear and consistent pattern in how this combo scales across resolutions. At 1080p, the system delivers high frame rates across all presets, with Low hitting 211 FPS and Ultra still managing 101 FPS. These numbers indicate that at this resolution, the Ryzen 5 2600 has enough processing power to feed the RTX 3070 Ti adequately, though the gap between presets suggests the CPU is starting to cap the highest frame rates.
Moving to 1440p, the average FPS drops by roughly 33-35% across the board. High goes from 134 to 88 FPS, Low from 211 to 141 FPS, Medium from 174 to 114 FPS, and Ultra from 101 to 67 FPS. This proportional decline is a classic sign of a balanced system where both CPU and GPU are sharing the workload, with the GPU beginning to take on more responsibility for the frame rate.
The step to 4K is where the GPU's dominance becomes unmistakable. High drops from 88 to 49 FPS (a 44% decline), Low from 141 to 78 FPS (a 45% decline), Medium from 114 to 63 FPS (a 45% decline), and Ultra from 67 to 37 FPS (a 45% decline). The uniform 44-45% reduction across all presets at 4K indicates that the RTX 3070 Ti is now the sole limiting factor, as the CPU's influence has faded entirely at this resolution.
The data suggests that the Ryzen 5 2600 is sufficient for 1080p and 1440p gaming with this GPU, but at 4K, the GPU's compute and memory bandwidth are the only things that matter. The fact that 4K Low (78 FPS) is still higher than 1440p Ultra (67 FPS) shows that the GPU has significant headroom when the CPU is not the bottleneck. This scaling behavior is typical for a mid-range CPU paired with a high-end GPU.
FAQ
Q: What is the best resolution for this combo in Palworld?
A: The data shows that 1440p offers the best balance of visual quality and performance, with High settings delivering 88 FPS and Ultra hitting 67 FPS. At 4K, the system becomes GPU-bound, with High dropping to 49 FPS, which is playable but not ideal for fast-paced gameplay.
Q: How does the Ryzen 5 2600 affect performance at 1080p?
A: At 1080p, the CPU's 6 cores and 12 threads with a 3.90 GHz boost clock are sufficient to keep the RTX 3070 Ti well-fed. The measured results show 134 FPS at High and 211 FPS at Low, indicating that the CPU is not a major bottleneck at this resolution, though the gap between Low and Ultra (110 FPS difference) suggests some CPU limitation at the highest frame rates.
Q: Is the 8 GB VRAM on the RTX 3070 Ti enough for Palworld at 4K?
A: The benchmark results indicate that 8 GB is workable but limiting at 4K. The Ultra preset delivers only 37 FPS, while dropping to Low improves that to 78 FPS. The 608.3 GB/s memory bandwidth helps mitigate the capacity constraint, but the data shows that 4K Ultra is not a playable setting for this combo.
Q: How does this combo compare to similar GPUs in the database?
A: The RTX 3070 Ti has an average benchmark score of 29945, which is within 0.5% of the RTX 2080 Ti (29783) and 0.1% of the RTX 5070 Mobile (29928). It sits slightly behind the AMD Radeon RX 6800 (30095) by 0.5%. These close margins indicate that the GPU's performance in Palworld should be comparable to those cards.
Q: What is the CPU's multi-threaded performance relative to its rivals?
A: The Ryzen 5 2600 has an average benchmark score of 21484, which is within 0.2% of the Intel Core Ultra 5 228V (21440) and 0.5% of the Intel Core i9-11900H (21367). It is 1.2% ahead of the AMD EPYC 9454 (21223) and 0.7% behind the Intel Xeon D-1746TER (21635). These deltas are negligible in real-world gaming terms.
Q: Should I use Low settings at 4K or High settings at 1440p?
A: The measured data shows that 4K Low delivers 78 FPS, while 1440p High delivers 88 FPS. Both are playable, but 1440p High provides better visual quality at a higher frame rate. The 1440p Medium preset (114 FPS) offers an even smoother experience if you prefer higher frame rates over maximum detail.
Settings Recommendations
Based on the measured FPS rows, the optimal settings for this combo depend on the target resolution. At 1080p, all presets are playable, but the High preset at 134 FPS provides a strong balance of visual fidelity and smoothness. The Ultra preset at 101 FPS is also viable for those who prioritize image quality, though the 33 FPS drop from High to Ultra may not justify the visual gains in a survival game where frame timing matters.
At 1440p, the Medium preset stands out as the sweet spot. It delivers 114 FPS with a minimum of 97 FPS, ensuring consistent performance without dipping below 60 FPS. The High preset at 88 FPS is still smooth, but the 26 FPS difference between Medium and High makes the latter a less attractive option. The Ultra preset at 67 FPS is borderline, and the data suggests it may struggle in heavy combat or exploration scenarios.
At 4K, the choices are more restricted. The Low preset at 78 FPS is the only setting that guarantees a comfortable frame rate above 60 FPS. The Medium preset at 63 FPS with a minimum of 54 FPS is playable but may experience noticeable drops in demanding areas. The High preset at 49 FPS and Ultra at 37 FPS are not recommended for a smooth experience, as they fall below the 60 FPS threshold that most players target.
The data shows that the Medium preset across all resolutions provides the most consistent minimum frame rates. At 1080p, Medium averages 174 FPS with a 148 FPS minimum; at 1440p, it averages 114 FPS with a 97 FPS minimum; at 4K, it averages 63 FPS with a 54 FPS minimum. This consistency suggests that Medium is the most balanced preset for this combo, offering good visuals without sacrificing frame stability.
CPU Role
The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the Zen+ architecture, running at a base clock of 3.40 GHz and a boost clock of 3.90 GHz. It features a 16 MB shared L3 cache, 512 KB of L2 per core, and 96 KB of L1 per core. The CPU has a TDP of 65 W and supports DDR4 memory in a dual-channel configuration, with a memory bandwidth of 46.9 GB/s. It was released in April 2018 and uses the AMD Socket AM4 platform with PCIe Gen 3 connectivity.
In Palworld, the CPU's role is most pronounced at lower resolutions where the GPU is not the limiting factor. The 1080p results show that the CPU can push the RTX 3070 Ti to 211 FPS at Low settings, which indicates that the 12 threads are sufficient for the game's physics and AI workloads. However, the scaling from Low to Ultra at 1080p (110 FPS difference) suggests that the CPU's single-thread performance, as indicated by its Geekbench single-core score of 1154, may begin to cap frame rates when the GPU has less work to do.
The CPU's multi-threaded performance is more than adequate for this title. Its Cinebench R15 multi-core score of 1248 and Passmark multithread score of 13160 show that it can handle the background tasks that Palworld's open world generates. The Passmark physics score of 673 and find prime numbers score of 37 are lower, which could indicate some weakness in specific computational tasks, but the game's measured performance does not show any obvious CPU-related stuttering.
At higher resolutions, the CPU's influence diminishes as the GPU becomes the bottleneck. The uniform 44-45% FPS drop from 1440p to 4K across all presets confirms that the Ryzen 5 2600 is not holding back the RTX 3070 Ti at 4K. The CPU's 12 threads and 3.90 GHz boost clock are enough to keep the GPU fed with draw calls and game logic, even in the most demanding 4K scenarios.
The CPU's benchmark scores place it in the 75th percentile of all CPUs, with an average benchmark score of 21484. Its nearest rivals, the Intel Core Ultra 5 228V and Intel Core i9-11900H, have nearly identical scores, indicating that the Ryzen 5 2600 is still competitive in 2024 for gaming workloads. The data shows that while this CPU is older, it does not meaningfully limit performance in Palworld when paired with the RTX 3070 Ti, especially at resolutions above 1080p.
Hardware Specifications
AMD Ryzen 5 2600
NVIDIA GeForce RTX 3070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3070 Ti in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.0 |
| 3840x2160 | Medium | 63.0 |
| 3840x2160 | High | 49.0 |
| 3840x2160 | Ultra | 37.0 |
| 2560x1440 | Low | 141.0 |
| 2560x1440 | Medium | 114.0 |
| 2560x1440 | High | 88.0 |
| 2560x1440 | Ultra | 67.0 |
| 1920x1080 | Low | 211.0 |
| 1920x1080 | Medium | 174.0 |
| 1920x1080 | High | 134.0 |
| 1920x1080 | Ultra | 101.0 |
Palworld with Ryzen 5 2600 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RTX 3070 Ti + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RTX 3070 Ti
Explore FPS benchmarks for other games using this same hardware combination.