Overpower

Overpower

AVERAGE FPS
89
good

This combination provides smooth gameplay with an average of 89 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 66 71 114
1440p QHD 65 78 84 135
1080p Full HD 73 87 94 151

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 114
3840x2160 Medium 71
3840x2160 High 66
3840x2160 Ultra 55
2560x1440 Low 135
2560x1440 Medium 84
2560x1440 High 78
2560x1440 Ultra 65
1920x1080 Low 151
1920x1080 Medium 94
1920x1080 High 87
1920x1080 Ultra 73

Overpower with Intel Core Ultra 5 125H + NVIDIA GeForce RTX 5070 Mobile, In-Depth Analysis

The Intel Core Ultra 5 125H paired with the NVIDIA GeForce RTX 5070 Mobile delivers a solid 1080p and 1440p experience in Overpower, but the data indicates a clear shift in the bottleneck as resolution climbs. The measured frame rates show a predictable pattern of decline from 1080p to 4K, with the scaling curve revealing where the GPU’s capabilities start to limit the combo. This analysis breaks down the measured results, contextualizes the performance against the broader combo database, and examines the specific roles of the CPU and GPU in producing these numbers.

Resolution Scaling

The measured FPS data for this combo shows a consistent and expected drop as resolution increases, but the rate of that drop provides insight into the system’s limiting component. At 1080p with High settings, the combo produces 87 FPS. Moving to 1440p at the same settings reduces the average to 78 FPS, a decrease of approximately 10.3%. The jump to 4K High yields 66 FPS, another 15.4% reduction from the 1440p figure. This scaling pattern is relatively gentle, suggesting that the system is not yet fully GPU-bound at 1440p, as the frame rate does not collapse when pixel count increases.

The trend becomes more pronounced when examining the Low preset. At 1080p Low, the combo achieves 151 FPS, which drops to 135 FPS at 1440p (a 10.6% decrease) and then to 114 FPS at 4K (a 15.6% decrease from 1440p). The consistency of these percentage drops across High and Low presets indicates that the RTX 5070 Mobile is the primary scaling factor, but the CPU still has enough headroom to maintain a relatively stable frame rate as resolution increases. The gap between 1080p and 4K at Low settings is 37 FPS, while at High settings the gap is 21 FPS. This wider gap at Low settings suggests that when the GPU is less stressed, the CPU can push more frames, but the GPU’s raw throughput still governs the upper ceiling.

The 4K results are particularly telling. At 4K Ultra, the combo drops to 55 FPS, which is a 24.7% reduction from the 1440p Ultra score of 65 FPS. This steeper decline at the highest quality preset indicates that the GPU’s memory bandwidth and shading throughput are becoming critical factors. The 8 GB VRAM and 384.0 GB/s bandwidth are likely contributing to this limitation, as the higher resolution and Ultra settings demand more memory and bandwidth. The data shows that the combo is best suited for 1080p and 1440p gaming, where it can maintain high frame rates, while 4K remains playable but requires dropping to Medium or High settings to stay above 60 FPS.

FAQ

Q: What is the average FPS at 1440p with Medium settings?

A: The combo achieves an average of 84 FPS at 2560x1440 with Medium settings, with a minimum of 71 FPS and a maximum of 97 FPS. This makes it a strong option for high-refresh-rate 1440p monitors.

Q: Can this combo handle 4K gaming at 60 FPS?

A: Yes, but only at Medium or High settings. The measured results show 71 FPS at 4K Medium and 66 FPS at 4K High, both above the 60 FPS threshold. At 4K Ultra, the average drops to 55 FPS, which is below 60.

Q: How does the combo perform at 1080p Ultra compared to 1440p High?

A: The 1080p Ultra average is 73 FPS, while the 1440p High average is 78 FPS. Interestingly, the higher resolution with High settings outperforms the lower resolution with Ultra settings, suggesting that the Ultra preset at 1080p imposes a heavier load than the High preset at 1440p.

Q: What is the best resolution for competitive play based on the data?

A: For the highest frame rates, 1080p Low delivers 151 FPS, which is the maximum measured average. 1440p Low also performs well at 135 FPS, offering a balance between visual fidelity and responsiveness.

Q: How does the combo rank among all tested configurations in this game?

A: The combo ranks 2054 out of 3713 tested combos, placing it in the 44.7th percentile. This indicates that it performs better than roughly 55% of all tested systems in Overpower.

Q: Is the GPU or CPU the limiting factor at 4K Ultra?

A: The data suggests the GPU is the primary limiter at 4K Ultra. The 55 FPS average at this setting is the lowest measured score, and the RTX 5070 Mobile’s 8 GB VRAM and 384.0 GB/s bandwidth are likely insufficient for the high memory pressure of 4K Ultra, whereas the CPU’s 14 cores and 18 threads provide ample processing power.

How This Combo Ranks

The combo’s rank of 2054 out of 3713 tested combinations in Overpower places it in the upper-middle tier of the database. This position is largely driven by the GPU’s performance, as the RTX 5070 Mobile sits in the 75th percentile among all GPUs, while the CPU is in the 79th percentile among all CPUs. However, the combination of these two components does not result in a top-tier ranking, suggesting that the game’s engine or the specific workload does not fully utilize the available hardware.

The GPU’s nearest rivals provide context for its performance. The RTX 5070 Mobile scores an average of 29928 in benchmark tests, which is 0.1% below the NVIDIA GeForce RTX 3070 Ti (29945) and 0.5% above the RTX 2080 Ti (29783). It also trails the AMD Radeon RX 6800 by 0.6% and the RX 6700 by 1.7%. These small deltas indicate that the RTX 5070 Mobile is a well-balanced performer, but it does not significantly outclass its predecessors or direct competitors. In Overpower, this translates to frame rates that are competitive but not class-leading.

The CPU’s ranking further clarifies the combo’s position. The Core Ultra 5 125H has an average benchmark score of 27507, which is nearly identical to its closest rival, the AMD Ryzen 7 5800 (27535, delta of -0.1%). It also matches the Intel Core i5-12600K and AMD Ryzen 7 5700X (both 27578, delta of -0.3%). This suggests that the CPU is not a weak link in the combo, but it also does not provide a significant advantage over older, established processors. The combo’s rank of 2054 is therefore a reflection of the balanced but not exceptional nature of both components.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the combo delivers an average of 151 FPS on Low, 94 FPS on Medium, 87 FPS on High, and 73 FPS on Ultra. The Medium preset also records a minimum of 80 FPS and a maximum of 108 FPS, while the other presets lack min/max data. The progression from Low to Ultra shows a 51.7% reduction in frame rate, with the largest single drop occurring between Low and Medium (57 FPS). This indicates that the Medium preset introduces a significant increase in graphical load, likely due to enhanced textures and effects.

At 2560x1440, the averages are 135 FPS on Low, 84 FPS on Medium, 78 FPS on High, and 65 FPS on Ultra. The Medium preset again provides min/max data (71 to 97 FPS). The drop from Low to Medium is 51 FPS, slightly less than at 1080p, but the overall scaling from Low to Ultra is 51.9%, which is nearly identical. This suggests that the GPU is handling the resolution increase efficiently, and the frame rate reductions are proportional to the quality preset changes.

At 3840x2160, the averages drop to 114 FPS on Low, 71 FPS on Medium, 66 FPS on High, and 55 FPS on Ultra. The Medium preset has a minimum of 61 FPS and a maximum of 82 FPS. The scaling from Low to Ultra is 51.8%, consistent with the other resolutions. However, the absolute frame rates are lower, with 4K Ultra being the only preset that falls below 60 FPS. The data shows that the combo can maintain playable frame rates at 4K for most presets, but Ultra requires a compromise on visual fidelity to achieve smooth gameplay.

GPU Role

The NVIDIA GeForce RTX 5070 Mobile is the dominant component in this combo, and its specifications directly influence the measured frame rates. The GPU features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 384.0 GB/s. This memory configuration is sufficient for 1080p and 1440p gaming, but at 4K Ultra, the 8 GB capacity may become a limiting factor, as the game’s high-resolution textures and effects can exceed this amount. The measured 55 FPS at 4K Ultra, compared to 65 FPS at 1440p Ultra, suggests that the GPU is struggling to maintain performance at the highest settings.

The GPU’s clock speeds are relatively modest, with a base clock of 907 MHz and a boost clock of 1425 MHz. These clocks are lower than typical desktop GPUs, but the mobile design prioritizes power efficiency, as indicated by the 50 W TDP. The 4608 shading units and 144 TMUs provide a solid foundation for pixel and texture processing, with a pixel rate of 68.40 GPixel/s and a texture rate of 205.2 GTexel/s. The FP32 performance of 13.13 TFLOPS is comparable to the GPU’s nearest rivals, such as the RTX 3070 Ti, which explains the similar frame rates in Overpower.

The GPU’s benchmark scores reinforce its role. The Passmark G3D score of 20355 places it in the 75th percentile, and its average benchmark score of 29928 is nearly identical to the RTX 3070 Ti (29945). This parity is reflected in the game’s measured FPS, where the combo’s performance is respectable but not exceptional. The GPU’s 144 tensor cores and 36 RT cores support advanced features like DLSS and ray tracing, but the measured data does not specify whether these features were enabled, so their impact on the FPS values cannot be determined from the available information.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the user’s priority for frame rate versus visual quality. For the highest possible frame rate, 1080p Low delivers 151 FPS, which is ideal for competitive play or high-refresh-rate monitors. The 1440p Low preset is also strong at 135 FPS, offering a better balance of resolution and speed for users with 1440p displays.

For a more visually rich experience without sacrificing smoothness, the Medium preset is the best choice. At 1080p Medium, the combo achieves 94 FPS, which is well above 60 FPS and provides a significant improvement in graphical fidelity over Low. The 1440p Medium preset delivers 84 FPS, with a minimum of 71 FPS, ensuring that frame times remain stable during intense action. This preset is recommended for users who want a high-quality visual experience at 1440p.

The High preset is also viable, with 87 FPS at 1080p and 78 FPS at 1440p. However, the Ultra preset offers diminishing returns, as the frame rates drop to 73 FPS at 1080p and 65 FPS at 1440p. At 4K, the Medium preset is the only option that maintains an average above 70 FPS, while High and Ultra fall to 66 FPS and 55 FPS, respectively. For 4K gaming, the Medium preset is the recommended starting point, as it provides a playable experience with acceptable visual quality. Users who prioritize frame rate over fidelity should stick to 1080p or 1440p with Low or Medium settings.

CPU Role

The Intel Core Ultra 5 125H plays a supporting but important role in this combo. With 14 cores and 18 threads, the CPU provides substantial multi-threaded performance, which is reflected in its Cinebench R23 multicore score of 12804.5 and Passmark multithread score of 21100. The CPU’s base clock of 3.60 GHz and boost clock of 4.50 GHz ensure responsive single-threaded performance, as evidenced by its Cinebench R23 single-core score of 1647.5 and Passmark single-thread score of 3399.

In Overpower, the CPU’s performance is sufficient to avoid becoming a bottleneck at lower resolutions. The measured 151 FPS at 1080p Low indicates that the CPU can feed the GPU with enough frames to reach high frame rates, and the relatively small FPS drop from 1080p to 1440p (10.6% at Low) suggests that the CPU still has headroom. However, the CPU’s 28 W TDP and 7 nm process node indicate a focus on efficiency, which may limit its ability to sustain maximum boost clocks under heavy loads.

The CPU’s nearest rivals, such as the AMD Ryzen 7 5800 and Intel Core i5-12600K, have nearly identical average benchmark scores (27535 and 27578, respectively, with deltas of -0.1% and -0.3%). This indicates that the Core Ultra 5 125H is comparable to these older desktop processors in overall performance, despite being a mobile chip. In Overpower, this means the CPU does not hold back the RTX 5070 Mobile, and the combo’s performance is primarily determined by the GPU’s capabilities. The 18 MB of shared L3 cache and dual-channel memory support further contribute to the CPU’s ability to handle game logic and asset streaming without introducing stutters or frame hitches.

Hardware Specifications

Intel Core Ultra 5 125H

Cores / Threads 14 / 18
Base Clock 3600 MHz
Boost Clock 4500 MHz
TDP 28W
Socket Intel BGA 2049
View Full CPU Details →

NVIDIA GeForce RTX 5070 Mobile

VRAM 8 GB GDDR7
Base Clock —
Boost Clock 1425 MHz MHz
TDP 50 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 125H + NVIDIA GeForce RTX 5070 Mobile in Overpower

Resolution Settings Avg FPS
3840x2160 Low 114.0
3840x2160 Medium 71.0
3840x2160 High 66.0
3840x2160 Ultra 55.0
2560x1440 Low 135.0
2560x1440 Medium 84.0
2560x1440 High 78.0
2560x1440 Ultra 65.0
1920x1080 Low 151.0
1920x1080 Medium 94.0
1920x1080 High 87.0
1920x1080 Ultra 73.0

Overpower with iUltra 5 125H + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Other Games with iUltra 5 125H + RTX 5070 Mobile

Explore FPS benchmarks for other games using this same hardware combination.