Overpower

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5060 delivers a consistent 60+ FPS experience across nearly all tested configurations in Overpower, though the data reveals a clear shift in system bottleneck as resolution climbs. At 1080p, the combination is heavily CPU-bound, with the GPU rarely being the limiting factor. Moving to 1440p begins to balance the load, while 4K firmly places the burden on the RTX 5060’s 8 GB of VRAM and memory bandwidth.

Resolution Scaling

The performance delta between 1080p and 4K is significant, but the scaling pattern is not uniform across all quality presets. At the Low setting, the average frame rate drops from 160.9 FPS at 1920x1080 to 122.3 FPS at 3840x2160, a decline of roughly 24%. This relatively modest drop indicates that at Low settings, the CPU is still holding the system back even at 4K, as the GPU has ample headroom to render frames quickly.

The scaling becomes more pronounced at higher quality presets. With Ultra settings, the average FPS falls from 77.9 at 1080p to 60.9 at 4K, a reduction of about 22%. While the percentage drop is similar, the absolute frame rate loss is smaller because the GPU is already working harder. The High preset shows the steepest relative decline, dropping from 94.0 FPS at 1080p to 73.1 FPS at 4K, a 22% reduction. Similarly, Medium settings scale from 98.9 FPS down to 78.8 FPS, a 20% decrease.

The data suggests that the RTX 5060 is the limiting component at 4K, particularly with Medium through Ultra settings. The gap between Low and Ultra at 4K is 61.4 FPS (122.3 vs 60.9), which is larger than the 83 FPS gap at 1080p (160.9 vs 77.9). This widening spread at higher resolutions indicates that the GPU's pixel throughput and memory subsystem are being pushed to their limits. The 128-bit memory bus and 448.0 GB/s bandwidth are likely the primary constraints, as higher resolutions demand more data to be streamed to fill the frame buffer.

Interestingly, the scaling from 1440p to 4K is less severe than from 1080p to 1440p for most presets. For instance, at High settings, the drop from 1080p to 1440p is 8 FPS (94.0 to 86.0), while the drop from 1440p to 4K is 12.9 FPS (86.0 to 73.1). This non-linear behavior points to a threshold where the GPU's compute resources become saturated, and further resolution increases have diminishing returns on frame time.

GPU Role

The RTX 5060’s specifications explain much of its behavior in Overpower. With a base clock of 2280 MHz and a boost clock of 2497 MHz, the GPU has a respectable frequency ceiling, but its memory configuration is the more telling factor. The 8 GB of GDDR7 memory on a 128-bit bus yields 448.0 GB/s of bandwidth. In a game like Overpower, which appears to be texture-heavy, this bandwidth is likely the bottleneck at 4K Ultra, where the frame rate dips to 60.9 FPS.

The GPU’s 3840 shading units and 120 texture mapping units provide solid raw compute, evidenced by the 19.18 TFLOPS FP32 throughput. However, the 48 ROPs (render output units) are a relatively low count for a card aiming at high-resolution gaming. The pixel rate of 119.9 GPixel/s means that at 4K (approximately 8.3 million pixels), the GPU can theoretically fill the screen at over 14,000 frames per second, but actual performance is constrained by other factors like memory latency and shader complexity.

The VRAM capacity of 8 GB is the most likely culprit for the performance gap between 1080p and 4K with Ultra settings. At 1080p Ultra, the game likely fits comfortably within the 8 GB frame buffer, allowing the GPU to operate without memory swapping. At 4K, the increased texture resolution and draw distance can easily exceed 8 GB, forcing the GPU to use system memory over the PCIe 5.0 x8 interface, which is slower than dedicated VRAM. This explains why the Low preset at 4K still achieves 122.3 FPS, as lower-quality textures require less memory, mitigating the VRAM pressure.

The GPU’s 73rd percentile ranking among all GPUs and an average benchmark score of 30109 place it in the mid-to-upper tier, but its nearest rivals are telling. The AMD Radeon RX 7700 XT sits just 0% apart in average score, while the older AMD Radeon RX 570 is actually 0.2% ahead. This suggests that raw compute scores do not translate directly to gaming performance, as the RX 570’s older architecture likely lacks the feature set required for Overpower’s specific effects.

FAQ

*Q: What is the best resolution to play Overpower with this combo?*

A: The data shows that 2560x1440 with High settings delivers 86.0 FPS, balancing visual quality and smoothness. At 4K, High settings still hold 73.1 FPS, but Ultra dips to 60.9 FPS, which is borderline for fast-paced action.

Q: Does the RTX 5060’s 8 GB VRAM cause issues at 4K?

A: Benchmark results indicate a significant frame rate drop at 4K Ultra (60.9 FPS) compared to Medium (78.8 FPS), suggesting that memory capacity may be limiting the highest quality settings. Low settings at 4K achieve 122.3 FPS, showing the GPU can handle the resolution when texture memory is reduced.

Q: How does the CPU affect 1080p performance?

A: At 1920x1080 with Low settings, the combo reaches 160.9 FPS, but Ultra only hits 77.9 FPS. The wide gap between Low and Ultra at 1080p, combined with the smaller drop when moving to 1440p, indicates the Core i5-14400F is the limiting factor at lower resolutions.

Q: Is this system capable of high refresh rate 1080p gaming?

A: Yes, for most settings. High settings achieve 94.0 FPS, Medium hits 98.9 FPS, and Low reaches 160.9 FPS, all of which support 144Hz monitors. Ultra settings fall to 77.9 FPS, which is still playable but below high-refresh thresholds.

Q: What is the most balanced settings preset for 4K?

A: Medium settings at 3840x2160 provide 78.8 FPS, which is a good compromise between visual fidelity and frame rate. High settings at 73.1 FPS are also viable, while Ultra drops below the 60 FPS comfort zone.

Q: How does this combo rank compared to other tested systems?

A: The combo ranks 845th out of 1744 tested combinations, placing it in the 48th percentile. This indicates it performs slightly below the median of all tested systems in Overpower.

Measured FPS Breakdown

At 1920x1080, the performance envelope is wide. Low settings deliver 160.9 FPS, making it the only preset to exceed 160 FPS. Medium achieves 98.9 FPS, High hits 94.0 FPS, and Ultra drops to 77.9 FPS. The spread of 83 FPS between Low and Ultra demonstrates the CPU’s capability to push high frame rates when the GPU is not heavily taxed.

Moving to 2560x1440, the frame rates compress. Low settings still manage 145.2 FPS, but Medium falls to 92.9 FPS, High to 86.0 FPS, and Ultra to 68.7 FPS. The gap between Low and Ultra narrows to 76.5 FPS, indicating the GPU is starting to take over the workload.

At 3840x2160, the GPU is firmly in control. Low settings produce 122.3 FPS, proof of the card’s raw pixel throughput. Medium drops to 78.8 FPS, High to 73.1 FPS, and Ultra to 60.9 FPS. The Low-to-Ultra gap is now 61.4 FPS, the smallest of all resolutions, confirming that the GPU’s limitations are the primary constraint at 4K.

The data reveals an interesting anomaly: the delta between Medium and High is consistent across resolutions (4.9 FPS at 1080p, 6.9 FPS at 1440p, 5.7 FPS at 4K), suggesting that the difference between these two presets is minimal in Overpower. However, the Ultra preset imposes a significant penalty over High at every resolution (16.1 FPS at 1080p, 17.3 FPS at 1440p, 12.2 FPS at 4K), indicating that Ultra enables taxing effects that disproportionately impact performance.

How This Combo Ranks

Within the database of tested combinations, the Core i5-14400F + RTX 5060 configuration ranks 845th out of 1744 total combos, placing it just inside the lower half of all systems tested in Overpower. This ranking of 48.4% is lower than what the individual component percentiles might suggest. The CPU sits at the 88th percentile among all CPUs, while the GPU is at the 73rd percentile, yet their combined performance in this game is below the median.

This discrepancy highlights that Overpower is sensitive to more than just raw compute power. The CPU’s nearest rivals, such as the Intel Core i7-12800H (0% delta) and AMD Ryzen 5 PRO 7645 (0.2% delta), achieve nearly identical average benchmark scores, yet their in-game performance could vary due to memory subsystem differences. The GPU’s nearest rival, the AMD Radeon RX 570, shows a 0.2% higher average score, which is a notable result given the RX 570’s older architecture and lack of modern features.

The rank of 845 suggests that while this combo is competent, it is not optimized for Overpower’s specific engine. The 8 GB VRAM limitation likely contributes to this middling rank, as many higher-ranked combos may feature GPUs with larger memory pools. The RTX 5060’s 128-bit memory bus, while fast for its class, may also be a drawback in a game that appears to favor memory bandwidth over pure shader throughput. For users targeting 60 FPS at 4K, this combo is adequate, but for those seeking high refresh rates at 1440p or above, other configurations in the database may offer better headroom.