Overpower

Resolution Scaling

The measured frame rates across resolutions reveal a system that scales predictably with pixel count, though the drop from 1080p to 4K is steeper than the raw pixel math would suggest if the GPU were perfectly saturated. At Ultra settings, the average frame rate falls from 77.9 FPS at 1920x1080 to 67.6 FPS at 2560x1440, a reduction of roughly 13% for a pixel increase of about 78%. Moving further to 3840x2160, the Ultra average drops to 56.9 FPS, which is 27% below the 1080p result. This scaling pattern indicates that the NVIDIA GeForce RTX 5060 is the primary limiting component at higher resolutions, but the relatively modest absolute losses also suggest that the AMD Ryzen 7 7800X3D is keeping the CPU side from becoming a bottleneck even at 4K.

At Low settings, the picture changes considerably. The 1080p Low average is 164.2 FPS, while 1440p Low reaches 142.5 FPS and 4K Low still manages 121.8 FPS. The spread from 1080p to 4K at Low is about 26%, which is nearly identical to the Ultra spread in percentage terms, but the absolute frame rates are much higher. This tells us that even when the GPU workload is lightened, the frame rate ceiling is not being hit by CPU limits — otherwise the 1080p Low result would be substantially higher relative to 4K Low. The 164.2 FPS figure at 1080p Low shows headroom, but the scaling suggests the game engine or driver overhead is capping performance somewhere below what the CPU could theoretically deliver.

The Medium settings tier offers a useful midpoint. At 1080p Medium, the average is 102.2 FPS, which drops to 90.6 FPS at 1440p and 77.9 FPS at 4K. The percentage drop from 1080p to 4K at Medium is about 24%, very close to the Low and Ultra patterns. This consistency across all three settings tiers indicates that the resolution scaling is primarily driven by GPU fill rate and memory bandwidth rather than any settings-specific feature. The RTX 5060's 448.0 GB/s bandwidth and 119.9 GPixel/s pixel rate are the relevant specifications here, and the data shows a smooth, predictable degradation as pixel count rises.

CPU Role

The AMD Ryzen 7 7800X3D brings 8 cores and 16 threads based on the Zen 4 architecture, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. This is a processor designed for high single-thread responsiveness, and its benchmark scores reflect that: the 3dmark single-thread score is 959, while the 2-thread score is 1887, showing strong scaling from one to two threads. The 4-thread score of 3684 and 8-thread score of 6539 continue the upward trend, reaching a max-thread score of 7967. In Cinebench R23, the multicore result is 29149 and the single-core result is 4115, which puts the processor in the 87th percentile among all CPUs.

For a game like Overpower, which is an Action title released in 2023, the CPU's role is to maintain frame pacing and handle game logic without becoming a bottleneck. The measured FPS data shows that even at 1080p Low, where the GPU has the least work to do, the average frame rate is 164.2 FPS. This is not an exceptionally high number for a 1080p Low scenario with a processor of this caliber, which suggests the game itself may have an engine-level frame rate limiter or that the RTX 5060 is still the limiting factor even at low settings. The 3dmark 16-thread score of 7980 versus the max-thread score of 7967 shows that the processor is fully saturated at 16 threads, but games rarely use all available threads.

The processor's 96 MB of shared L3 cache is a notable feature for gaming workloads, as it can keep frequently accessed data close to the cores. The benchmark results show a passmark multithread score of 34293 and a passmark physics score of 3522, both of which indicate strong computational throughput. However, the data from Overpower specifically shows that the CPU is not the limiting factor at any resolution or settings combination tested — the frame rate scaling follows GPU-oriented patterns consistently.

GPU Role

The NVIDIA GeForce RTX 5060 is the other half of this pairing, and its specifications make it a mid-range card with a 73rd percentile ranking among all GPUs. It features 8 GB of GDDR7 memory on a 128-bit bus, yielding 448.0 GB/s of bandwidth. The base clock is 2280 MHz with a boost clock of 2497 MHz, and the card has 3840 shading units, 120 texture mapping units, and 48 raster operation pipelines. The FP32 compute throughput is 19.18 TFLOPS, which is a moderate figure for a modern graphics card.

In Overpower, the RTX 5060's performance characteristics are clearly visible. At 4K Ultra, the average frame rate is 56.9 FPS, which is below the 60 FPS threshold that many players consider playable. At 4K High, the average rises to 72 FPS, and at 4K Medium it reaches 77.9 FPS. The 4K Low result of 121.8 FPS shows that the card has substantial headroom when the graphics load is reduced. The 8 GB VRAM capacity may be a factor at 4K Ultra, where texture memory demands are highest, but the measured data does not show any anomalous drops that would indicate memory swapping.

The RTX 5060's nearest rival in average benchmark score is the AMD Radeon RX 7700 XT, with a deltaPct of 0, meaning the two cards are effectively tied in synthetic benchmarks. The RTX 5070 Mobile is 0.6% ahead, and the Tesla M60 is 0.5% behind. This context helps explain the Overpower results: the card is positioned in a competitive mid-range tier, and its measured frame rates in this game are consistent with that positioning. The 19.18 TFLOPS FP32 figure and the 299.6 GTexel/s texture rate are the specifications that would most directly influence rasterization performance in a game like Overpower.

How This Combo Ranks

The combination of the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5060 ranks 880th out of 1744 tested combos in Overpower. This places it in the 50th percentile of tested combinations — exactly the middle of the pack. Given that the CPU is in the 87th percentile among all CPUs and the GPU is in the 73rd percentile among all GPUs, the combo ranking of 50th may seem lower than expected. This discrepancy suggests that the RTX 5060's performance in this specific game is not as strong as its synthetic benchmark scores would predict, or that the game is heavily GPU-bound in a way that penalizes the 8 GB VRAM capacity at higher settings.

The combo's rank of 880 out of 1744 means that roughly half of the tested configurations outperform it in Overpower. This is a meaningful data point for anyone considering this pairing. The CPU is clearly not the limiting factor — its benchmark scores are well above the GPU's, and the game's frame rate scaling follows GPU-centric patterns. The RTX 5060's 73rd percentile rank among all GPUs is solid, but in a game with demanding visuals at 4K, the card's mid-range positioning shows through.

Measured FPS Breakdown

At 1920x1080, the RTX 5060 and Ryzen 7 7800X3D combination delivers an average of 164.2 FPS at Low settings, 102.2 FPS at Medium, 94.4 FPS at High, and 77.9 FPS at Ultra. The jump from Low to Medium is substantial — a 62 FPS drop — while the drop from Medium to High is only 7.8 FPS, and from High to Ultra is 16.5 FPS. This suggests that the Low to Medium transition involves a significant increase in rendering work, while the Medium to High step is relatively modest in its performance impact.

Moving to 2560x1440, the averages are 142.5 FPS at Low, 90.6 FPS at Medium, 83.3 FPS at High, and 67.6 FPS at Ultra. The pattern is similar to 1080p, with a large drop from Low to Medium (51.9 FPS) and then smaller incremental decreases. At 3840x2160, the results are 121.8 FPS at Low, 77.9 FPS at Medium, 72 FPS at High, and 56.9 FPS at Ultra. The 4K Ultra result is the only one in the entire dataset that falls below 60 FPS, and it does so by a margin of 3.1 FPS.

The consistency of the settings scaling across all three resolutions is notable. At every resolution, the Low to Medium drop is the largest single-step decrease, while Medium to High is the smallest. This points to a specific rendering feature or set of features that are enabled when moving from Low to Medium, and which have a disproportionate performance cost compared to the visual quality improvement they provide.

FAQ

Q: What is the average frame rate at 1080p Ultra in Overpower with this combination?

A: The measured average frame rate at 1920x1080 with Ultra settings is 77.9 FPS.

Q: Does this combo maintain 60 FPS or higher at 4K?

A: At 3840x2160, the average frame rate is 72 FPS at High settings and 77.9 FPS at Medium settings, but at Ultra settings it drops to 56.9 FPS, which is below the 60 FPS threshold.

Q: How does the RTX 5060 compare to its closest rival in synthetic benchmarks?

A: The AMD Radeon RX 7700 XT has a deltaPct of 0 relative to the RTX 5060, meaning they are statistically tied in average benchmark score. The RTX 5070 Mobile is 0.6% ahead.

Q: What is the CPU's benchmark percentile relative to all processors?

A: The AMD Ryzen 7 7800X3D ranks in the 87th percentile among all CPUs, with an average benchmark score of 31580.

Q: What is the largest single-settings-step performance drop across all resolutions?

A: The drop from Low to Medium is consistently the largest at each resolution. At 1080p, it is a decrease from 164.2 FPS to 102.2 FPS, a drop of 62 FPS.

Q: What is the combo's overall ranking among tested configurations in Overpower?

A: This CPU and GPU combination ranks 880th out of 1744 tested combos, placing it in the middle of the field.