Overpower

Overpower

AVERAGE FPS
30
playable

This combination offers playable performance with an average of 30 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 19 20 23 40
1440p QHD 19 26 30 46
1080p Full HD 25 28 33 48

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 40
3840x2160 Medium 23
3840x2160 High 20
3840x2160 Ultra 19
2560x1440 Low 46
2560x1440 Medium 30
2560x1440 High 26
2560x1440 Ultra 19
1920x1080 Low 48
1920x1080 Medium 33
1920x1080 High 28
1920x1080 Ultra 25

Overpower with Intel Core i3-12100F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i3-12100F is a 4-core, 8-thread desktop processor based on the Alder Lake architecture, built on Intel's 10 nm process. It operates with a base clock of 3.30 GHz and a boost clock of 4.30 GHz, with a TDP of 58 W. The chip carries 12 MB of shared L3 cache, alongside per-core L1 and L2 caches of 80 KB and 1.25 MB respectively. Memory support spans both DDR4 and DDR5, through a dual-channel bus, and the processor connects via PCIe Gen 5 with 16 CPU lanes.

In synthetic benchmarks, this CPU demonstrates a notable spread between single-threaded and multi-threaded performance. Its 3DMark single-thread score is 893, while the 2-thread test reaches 1659, the 4-thread test hits 2859, and the 8-thread test climbs to 4026. The max-threads score of 4023 is nearly identical to the 8-thread result, confirming that the 4-core/8-thread design is fully utilized without any hyperthreading overhead beyond that point. Cinebench R23 results show a multicore score of 11912 and a single-core score of 1681, which is a ratio of roughly 7:1 — typical for a quad-core part with strong single-core efficiency.

The CPU's percentile ranking against all processors is 72, placing it above the majority of tested CPUs. Its average benchmark score is 13516. Compared to its nearest rivals, the data shows a tightly packed field. The AMD Ryzen Threadripper PRO 3975WX sits at 13534, a delta of -0.1%, meaning the i3-12100F is essentially tied with a high-end workstation part in this aggregate metric. The Intel Core i7-1250U scores 13462, a delta of 0.4%, and the Intel Core i3-10105 comes in at 13430, a delta of 0.6%. The Intel Core i7-7700K trails at 13280, a delta of 1.8%. This clustering suggests that for the CPU-bound portions of Overpower, the i3-12100F delivers performance comparable to much more expensive or higher-tier processors, at least in terms of average benchmark scores.

For an action game like Overpower, the 4-core/8-thread configuration is relevant because modern titles often scale with threads, but the high boost clock of 4.30 GHz helps maintain responsiveness in single-threaded game logic. The data indicates that the CPU is not the primary bottleneck in most scenarios, as its benchmark scores are competitive with far more powerful processors.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce GTX 1050 Ti is built on the Pascal architecture, using the GP107 chip manufactured on a 14 nm process by Samsung. It packs 3,300 million transistors on a 132 mm² die. The GPU operates at a base clock of 1291 MHz with a boost clock of 1392 MHz, while memory runs at 1752 MHz, translating to 7 Gbps effective. The card has 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. Compute resources include 768 shading units, 48 texture mapping units, and 32 ROPs, yielding a pixel rate of 44.54 GPixel/s and a texture rate of 66.82 GTexel/s. FP32 performance is rated at 2.138 TFLOPS.

In GPU benchmarks, the GTX 1050 Ti scores 6340 in PassMark G3D, 20638 in Geekbench OpenCL, and 19851 in Geekbench Vulkan. Its percentile ranking against all GPUs is 30, meaning it sits in the lower third of the tested GPU pool. The average benchmark score is 5316. The nearest rivals are extremely close: the NVIDIA GeForce 930A scores 5317 (delta 0%), the GeForce 940M scores 5297 (delta 0.4%), the AMD Radeon R7 240 scores 5280 (delta 0.7%), and the AMD Radeon R7 M445 scores 5361 (delta -0.8%). These deltas are all under 1%, indicating that the GTX 1050 Ti is performance-equivalent to a set of entry-level mobile and desktop parts, rather than standing out in its class.

For Overpower, the 4 GB VRAM capacity is a limiting factor at higher resolutions and settings. The 128-bit memory bus and 112.1 GB/s bandwidth constrain texture throughput, which directly impacts frame rates in a visually demanding action game. The GPU's 75 W TDP and lack of power connectors make it a low-power solution, but the benchmark data shows that it struggles to maintain playable frame rates at 4K, as detailed in later sections. The GPU's age (released in 2016, now end-of-life) is reflected in its low percentile ranking relative to modern hardware.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern of performance degradation as resolution increases. At 1080p with Low settings, the combo achieves an average of 48.1 FPS. Moving to 1440p Low, the average drops to 46.1 FPS — a modest reduction of about 4%. At 4K Low, the average falls to 39.5 FPS, which is an 18% drop from 1080p Low. This relatively gentle slope at Low settings suggests that the CPU is still able to feed the GPU adequately, and the GPU is the primary constraint.

At Medium settings, the scaling is steeper. The 1080p Medium average is 33.4 FPS, 1440p Medium is 30 FPS (down 10%), and 4K Medium is 23.3 FPS (down 30% from 1080p). This indicates that as settings increase, the GPU's workload grows faster than the resolution alone, pointing to the GTX 1050 Ti's limited shading and texture throughput.

High settings show a similar trend: 1080p High averages 28.2 FPS, 1440p High drops to 25.9 FPS (down 8%), and 4K High falls to 19.7 FPS (down 30% from 1080p). Ultra settings are the most punishing: 1080p Ultra is 25.4 FPS, 1440p Ultra is 19 FPS (down 25%), and 4K Ultra is 19.1 FPS (down 25% from 1080p). Interestingly, the 4K Ultra result (19.1 FPS) is essentially identical to the 1440p Ultra result (19 FPS), suggesting that at these extreme settings, the GPU is so saturated that additional resolution makes little difference — the card is already at its computational limit.

The data shows that the GTX 1050 Ti is the limiting component across all resolutions. The CPU's strong benchmark scores (72nd percentile) do not translate into higher frame rates because the GPU cannot keep up. The 4 GB VRAM and 112.1 GB/s bandwidth become bottlenecks at higher resolutions, as evidenced by the steep FPS drops from 1080p to 1440p and from 1440p to 4K at Medium and High settings. The gap between Low and Ultra at any resolution is substantial — at 1080p, Low (48.1 FPS) is nearly double Ultra (25.4 FPS) — confirming that graphical settings have a far larger impact than resolution changes for this combination.

How This Combo Ranks

In the database of tested combinations, this pairing of Intel Core i3-12100F and NVIDIA GeForce GTX 1050 Ti ranks 1727 out of 1744 combos for Overpower. This places it in the bottom 1% of all tested configurations, which is consistent with the GPU's low percentile ranking (30th) and the fact that the CPU's strong synthetic scores are wasted on a GPU that cannot translate them into playable frame rates.

The rank of 1727 out of 1744 means that only 17 combos perform worse in this game. This is a stark contrast to the CPU's individual standing (72nd percentile among all CPUs) and the GPU's near-parity with entry-level parts. The data indicates that the GPU is the dominant factor in this combo's ranking, as the CPU's performance headroom is not utilized. For context, the CPU's nearest rivals (Threadripper PRO 3975WX, i7-1250U, i3-10105, i7-7700K) all have average scores within 1.8% of the i3-12100F, yet pairing them with a similarly weak GPU would likely yield similar rankings. This underscores that in Overpower, the graphics card dictates the overall combo ranking far more than the processor.

The low rank is also reflected in the measured FPS: the highest average across any resolution and setting is 48.1 FPS at 1080p Low, which is below the 60 FPS target commonly considered smooth for action games. At 4K Ultra, the average drops to 19.1 FPS, which is borderline unplayable. The data suggests that this combo is only viable for low-resolution, low-settings gameplay, and even then, it does not achieve high frame rates.

FAQ

Q: What is the best resolution and settings combination for this CPU/GPU pairing in Overpower?

A: Based on the measured FPS, 1080p Low provides the highest average at 48.1 FPS. The next best is 1440p Low at 46.1 FPS, which is nearly identical, suggesting that 1440p Low is also viable if the user prefers higher resolution.

Q: How does the GTX 1050 Ti compare to its nearest GPU rivals in synthetic benchmarks?

A: The GTX 1050 Ti has an average benchmark score of 5316. Its closest rival, the NVIDIA GeForce 930A, scores 5317 (a 0% delta), while the GeForce 940M scores 5297 (0.4% delta), the AMD Radeon R7 240 scores 5280 (0.7% delta), and the AMD Radeon R7 M445 scores 5361 (-0.8% delta). All are within 1% of each other.

Q: Is the CPU or GPU the bottleneck in this combo?

A: The GPU is clearly the bottleneck. The CPU's average benchmark score of 13516 places it in the 72nd percentile of all CPUs, while the GPU's average score of 5316 places it in the 30th percentile. The FPS data shows the GPU struggling at higher resolutions, with 4K Ultra at 19.1 FPS, while the CPU's strong multi-threaded scores (e.g., Cinebench R23 multicore at 11912) indicate it has ample headroom.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1080p, the Low setting averages 48.1 FPS, while Ultra averages 25.4 FPS. This is a difference of 22.7 FPS, or about 47% lower performance at Ultra compared to Low.

Q: How does the combo rank among all tested combinations for Overpower?

A: The combo ranks 1727 out of 1744 tested combinations, placing it in the bottom 1% of all configurations. This is consistent with the GPU's low individual ranking.

Q: Does increasing resolution from 1440p to 4K have a significant impact at Ultra settings?

A: Surprisingly, the impact is minimal. At 1440p Ultra, the average is 19 FPS, and at 4K Ultra, it is 19.1 FPS — essentially identical. This suggests the GPU is fully saturated at both resolutions, so further resolution scaling does not change performance.

Measured FPS Breakdown

The following table presents all measured average FPS values for this combo in Overpower, organized by resolution and settings.

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 (4K) | High | 19.7 |

| 3840x2160 (4K) | Low | 39.5 |

| 3840x2160 (4K) | Medium | 23.3 |

| 3840x2160 (4K) | Ultra | 19.1 |

| 2560x1440 | High | 25.9 |

| 2560x1440 | Low | 46.1 |

| 2560x1440 | Medium | 30.0 |

| 2560x1440 | Ultra | 19.0 |

| 1920x1080 | High | 28.2 |

| 1920x1080 | Low | 48.1 |

| 1920x1080 | Medium | 33.4 |

| 1920x1080 | Ultra | 25.4 |

The data shows a clear hierarchy: Low settings always yield the highest FPS, followed by Medium, then High, and Ultra is the lowest at every resolution. The best overall result is 48.1 FPS at 1080p Low, while the worst is 19.1 FPS at 4K Ultra. Notably, the 1440p Ultra (19.0 FPS) and 4K Ultra (19.1 FPS) results are nearly identical, indicating the GPU's performance ceiling is reached around 19 FPS regardless of resolution when ultra settings are applied. The spread between Low and Ultra at each resolution is roughly 20 FPS at 1080p (48.1 vs 25.4), 27 FPS at 1440p (46.1 vs 19.0), and 20 FPS at 4K (39.5 vs 19.1). This suggests that settings have a larger impact on FPS than resolution for this hardware combination, particularly at lower resolutions.

Hardware Specifications

Intel Core i3-12100F

Cores / Threads 4 / 8
Base Clock 3300 MHz
Boost Clock 4300 MHz
TDP 58W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i3-12100F + NVIDIA GeForce GTX 1050 Ti in Overpower

Resolution Settings Avg FPS
3840x2160 Low 39.5
3840x2160 Medium 23.3
3840x2160 High 19.7
3840x2160 Ultra 19.1
2560x1440 Low 46.1
2560x1440 Medium 30.0
2560x1440 High 25.9
2560x1440 Ultra 19.0
1920x1080 Low 48.1
1920x1080 Medium 33.4
1920x1080 High 28.2
1920x1080 Ultra 25.4

Overpower with ii3-12100F + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with GTX 1050 Ti + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with ii3-12100F + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.