Archeage

Archeage

AVERAGE FPS
25
limited

This combination may struggle with this title, averaging 25 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 9 11 16 21
1440p QHD 15 19 28 34
1080p Full HD 22 33 42 51

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 21
3840x2160 Medium 16
3840x2160 High 11
3840x2160 Ultra 9
2560x1440 Low 34
2560x1440 Medium 28
2560x1440 High 19
2560x1440 Ultra 15
1920x1080 Low 51
1920x1080 Medium 42
1920x1080 High 33
1920x1080 Ultra 22

Archeage with Intel Core i3-12100F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

ArcheAge is an older MMORPG, but that does not make it easy on modern low-end hardware. The data for the Intel Core i3-12100F paired with the NVIDIA GeForce GTX 1050 Ti shows a system that is heavily constrained by the graphics card at nearly every setting. The measured frame rates reveal a configuration that is strictly for 1080p gaming, with any move to higher resolutions resulting in a slideshow. The combination ranks near the very bottom of the database for this title, sitting at 1704 out of 1727 tested combos, placing it in the bottom 1.3% of all configurations tested for this game.

Resolution Scaling

The frame rate drop from 1080p to 4K is severe and tells a clear story about system bottlenecks. At 1080p with High settings, the system produces 33 FPS. Moving to 1440p drops that to 18.8 FPS, a 43% reduction. Pushing further to 4K yields just 11.2 FPS, which is a 66% drop from the 1080p baseline. This precipitous decline is a classic indicator of a GPU-limited scenario; the GTX 1050 Ti simply cannot fill the increasing pixel count.

The scaling pattern is consistent across all quality presets. At Low settings, the system goes from 50.8 FPS at 1080p to 34.1 FPS at 1440p (a 33% drop) and then to 20.7 FPS at 4K (a 59% drop). Even at the lowest settings, the GPU is the limiting factor. The data suggests that the CPU, with its strong single-threaded performance (a 3dmark_single_thread score of 893 and a Cinebench R23 single-core score of 1681), has enough headroom to feed the GPU, but the graphics card runs out of processing power long before the CPU does.

The fact that the frame rate at 4K Low (20.7 FPS) is nearly double that of 4K High (11.2 FPS) shows that while the GPU is the bottleneck, it is still responsive to settings changes. However, the absolute numbers are so low that none of the 4K configurations are playable. The conclusion is straightforward: this pairing is designed for 1080p, and even there, it struggles to maintain high frame rates on higher presets.

FAQ

Q: Can this system run ArcheAge at 4K resolution?

A: No. The data shows the configuration is not viable at 3840x2160. The best 4K result is 20.7 FPS on Low settings, which is far below playable thresholds. High and Ultra settings yield 11.2 FPS and 9.4 FPS, respectively.

Q: What is the playable resolution for this hardware?

A: The only resolution with acceptable frame rates is 1920x1080. The system achieves 50.8 FPS on Low and 42.1 FPS on Medium at this resolution. While not high-refresh territory, these are the only settings that approach a smooth experience.

Q: Is the CPU or GPU the main bottleneck in this game?

A: The benchmark data indicates the GPU is the primary limiting factor. Frame rates scale dramatically with resolution, a hallmark of GPU limitation. The CPU's high single-thread benchmark scores (like a Geekbench single-core score of 2224) suggest it is not the primary constraint in this title.

Q: How does the GTX 1050 Ti compare to its closest rivals in the database?

A: The GTX 1050 Ti has an average benchmark score of 5316. Its nearest rival, the NVIDIA GeForce 930A, has a nearly identical score of 5317 with a deltaPct of 0. The NVIDIA GeForce 940M is 0.4% slower, while the AMD Radeon R7 240 is 0.7% slower. These are all very close in overall compute capability.

Q: How does the CPU's performance rank among all processors?

A: The Intel Core i3-12100F ranks in the 72nd percentile of all CPUs. Its average benchmark score of 13516 places it in close competition with the AMD Ryzen Threadripper PRO 3975WX, which is only 0.1% faster, and the Intel Core i7-7700K, which is 1.8% slower.

Q: What is the best frame rate achieved in the entire test suite?

A: The highest average frame rate recorded is 50.8 FPS, achieved specifically at 1920x1080 resolution with Low quality settings.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the decisive component in this configuration's performance. With a 4 GB GDDR5 memory buffer and a 128-bit bus providing 112.1 GB/s of bandwidth, it is a card from 2016 that is now well into its end-of-life cycle. Its benchmark profile confirms its modest standing; it sits in the 30th percentile of all GPUs, with an average score of 5316. The closest rivals in the database, the GeForce 930A and GeForce 940M, are essentially performance equals, with deltaPct values of 0 and 0.4, respectively.

The card's clock speeds are low by modern standards, with a base clock of 1291 MHz and a boost of 1392 MHz. This, combined with 768 shading units and a 2.138 TFLOPS FP32 compute rate, explains the difficulty in pushing high frame rates. In ArcheAge, the game's demands quickly overwhelm the card, especially as resolution increases. The data confirms this, as the frame rate drops from a semi-playable 33 FPS at 1080p High to a choppy 18.8 FPS at 1440p High, and finally to a nearly static 11.2 FPS at 4K High.

The 4 GB VRAM capacity is sufficient for 1080p textures, but the card's raw processing power is what holds it back. The Geekbench OpenCL score of 20638 and the Passmark G3D score of 6340 are indicative of a GPU that is several generations behind. While the CPU can handle the game's logic and draw calls, the GPU is saturated. The performance gap between the Low and Ultra presets at 1080p (50.8 FPS vs 22 FPS) shows the card is sensitive to the increased shading and lighting loads, meaning users must trade visual fidelity for playability.

Measured FPS Breakdown

The measured frame rates provide a comprehensive look at the system's capabilities. At 1920x1080, the resolution most suited to this hardware, the results are tiered. On the Low preset, the system achieves an average of 50.8 FPS, which is the single highest frame rate recorded for this combo. The Medium preset follows at 42.1 FPS, and High drops to 33 FPS. The Ultra preset is the most demanding, yielding only 22 FPS, which is borderline playable but not smooth.

Moving to 2560x1440, the system struggles significantly. The Low preset manages 34.1 FPS, which is still a noticeable drop from the 1080p result. Medium falls to 27.9 FPS, and High craters to 18.8 FPS. The Ultra preset is effectively unplayable at 14.7 FPS. The gap between Low and Ultra at this resolution is 19.4 FPS, showing that settings have a significant impact, but even the best case is not ideal.

At 3840x2160, the configuration is out of its depth. The Low preset produces 20.7 FPS, which is the only 4K result above 20 FPS. Medium produces 16.1 FPS, High produces 11.2 FPS, and Ultra produces 9.4 FPS. These numbers are all well below the threshold for a comfortable gaming experience. The data shows a clear pattern: the system is only viable at 1080p, and even then, users must make a choice between image quality and frame rate.

Settings Recommendations

Given the measured data, the optimal experience for this hardware is at 1920x1080 with the Low preset, which yields 50.8 FPS. This is the only configuration that breaks the 50 FPS barrier and provides a playable, responsive feel for an MMORPG where reaction times matter. The Low preset offers a significant 8.7 FPS advantage over Medium (42.1 FPS) and a 17.8 FPS advantage over High (33 FPS).

For users who prioritize visual quality over frame rate, the High preset at 1080p (33 FPS) is the highest visual fidelity that remains technically playable. However, the data suggests this is a compromise. The Ultra preset at 1080p (22 FPS) is not recommended, as the frame rate dips too low for consistent gameplay. The Medium preset at 1080p (42.1 FPS) presents a balanced option, offering a smoother experience than High while providing better visuals than Low.

The data strongly advises against using resolutions above 1920x1080. The 1440p and 4K results, even on the lowest settings, do not provide a competitive or enjoyable experience. For this specific CPU and GPU pairing, the "best experience" is defined by the 1080p Low setting. It is the only measured point that provides a frame rate high enough to be considered fluid, surpassing the 1440p Low result by 16.7 FPS and the 4K Low result by 30.1 FPS.

Hardware Specifications

Intel Core i3-12100F

Cores / Threads 4 / 8
Base Clock 3300 MHz
Boost Clock 4300 MHz
TDP 58W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i3-12100F + NVIDIA GeForce GTX 1050 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 20.7
3840x2160 Medium 16.1
3840x2160 High 11.2
3840x2160 Ultra 9.4
2560x1440 Low 34.1
2560x1440 Medium 27.9
2560x1440 High 18.8
2560x1440 Ultra 14.7
1920x1080 Low 50.8
1920x1080 Medium 42.1
1920x1080 High 33.0
1920x1080 Ultra 22.0

Archeage with ii3-12100F + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with GTX 1050 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with ii3-12100F + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.