Overpower

Overpower

AVERAGE FPS
70
good

This combination provides smooth gameplay with an average of 70 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 52 56 90
1440p QHD 51 61 66 106
1080p Full HD 57 69 74 118

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 90
3840x2160 Medium 56
3840x2160 High 52
3840x2160 Ultra 43
2560x1440 Low 106
2560x1440 Medium 66
2560x1440 High 61
2560x1440 Ultra 51
1920x1080 Low 118
1920x1080 Medium 74
1920x1080 High 69
1920x1080 Ultra 57

Overpower with AMD Ryzen 7 9800X3D + AMD Radeon RX 6600, In-Depth Analysis

The AMD Ryzen 7 9800X3D paired with the AMD Radeon RX 6600 delivers a specific performance profile in Overpower, one that is heavily dictated by resolution and preset selection. The measured frame rates across 1080p, 1440p, and 4K reveal a system where the RX 6600 is the primary constraint at higher resolutions, while the CPU’s capabilities become more relevant at lower settings. This analysis breaks down the measured data, contextualizes the components’ benchmark scores, and offers practical guidance based solely on the numbers provided.

Resolution Scaling

The measured FPS data shows a clear and consistent decline as resolution increases from 1920x1080 to 3840x2160, which is expected for a GPU like the Radeon RX 6600. At High settings, average FPS drops from 69 at 1080p to 61 at 1440p, a reduction of 8 FPS, and then further to 52 at 4K, another 9 FPS decline. This 24.6% drop from 1080p to 4K at High settings indicates that the GPU is being progressively more stressed, but the scaling is not catastrophic—the card still maintains playable averages at all three resolutions on High.

The Low preset tells a different story. At 1080p, the combo achieves 118 FPS average, which falls to 106 FPS at 1440p (a 10.2% drop) and then to 90 FPS at 4K (a 15.1% drop from 1440p). The fact that 4K Low still delivers 90 FPS average suggests that the GPU is not the sole bottleneck at lower settings; the CPU, with its 8 cores and 16 threads based on Zen 5 architecture, has enough headroom to feed the RX 6600 even at 4K when the graphical load is reduced. However, the percentage losses are larger between 1440p and 4K than between 1080p and 1440p for Low, indicating that the GPU’s pixel throughput limits are starting to show.

Medium settings follow a similar pattern: 74 FPS at 1080p, 66 FPS at 1440p, and 56 FPS at 4K. The 4K Medium result includes a min FPS of 48 and max of 64, which shows frame time variance that is not present in the other presets’ averaged data. Ultra is the most demanding, with 57 FPS at 1080p, 51 FPS at 1440p, and 43 FPS at 4K. The 4K Ultra result is the lowest measured average in the entire dataset, reinforcing that this combination is not suited for maximum settings at the highest resolution.

The limiting component shifts based on resolution. At 1080p, the gap between Low (118 FPS) and Ultra (57 FPS) is 61 FPS, which means the GPU is handling a wide range of workloads, but the CPU is not the primary constraint—otherwise the gap would be narrower. At 4K, the same gap is 47 FPS (90 vs 43), and the absolute numbers are lower, confirming that the RX 6600’s 8 GB GDDR6 memory and 224.0 GB/s bandwidth are the limiting factors when pixel count rises. The data shows that resolution scaling is smooth and predictable, with no anomalous spikes or collapses, which indicates a balanced platform memory subsystem (DDR5, dual-channel, 89.6 GB/s) and PCIe 4.0 x8 interface.

GPU Role

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with the Navi 23 chip, manufactured on a 7 nm process by TSMC. Its boost clock is rated at 2491 MHz, with a game clock of 2044 MHz and base clock of 1626 MHz. The memory operates at 1750 MHz, translating to 14 Gbps effective, across a 128-bit bus, yielding 224.0 GB/s bandwidth. The GPU has 8 GB of GDDR6 memory, which is sufficient for the measured presets in Overpower, but the 4K Ultra average of 43 FPS suggests that memory capacity or bandwidth is a limiting factor at that extreme.

Benchmark results for the RX 6600 show a PassMark G3D score of 15096 and a 3DMark Steel Nomad DX12 score of 1492. The GPU’s percentile versus all GPUs is 63, meaning it sits above the median but below many modern high-end cards. Its nearest rivals in aggregate benchmark score are the NVIDIA Quadro K6000 (19030, deltaPct 0), NVIDIA GeForce RTX 4050 Mobile (19049, deltaPct -0.1), and NVIDIA Tesla K20m (19089, deltaPct -0.3). These deltas are all within 0.4%, indicating that the RX 6600 is statistically equivalent in raw compute to those cards, but in Overpower the measured FPS shows that the driver optimization and game-specific behavior favor this RDNA 2 part.

The GPU’s FP32 performance is 8.928 TFLOPS, with FP16 at 17.86 TFLOPS (2:1 ratio). The texture rate is 279.0 GTexel/s and pixel rate is 159.4 GPixel/s. These figures explain why the card can deliver 118 FPS at 1080p Low but only 43 FPS at 4K Ultra—the pixel fill rate and shader throughput are insufficient for the 8.3 million pixels at 4K with heavy effects. The 28 ray tracing cores are present, but no RT-specific measured data is provided, so their impact on Overpower cannot be quantified from this pack.

The GPU’s TDP is 132 W, with a suggested PSU of 300 W, and it uses a single 8-pin power connector. The card is 190 mm long, 110 mm tall, and 40 mm wide, making it a dual-slot design. The bus interface is PCIe 4.0 x8, which is a potential bottleneck in theory, but the measured FPS data shows no sign of interface-limited performance, as the CPU is capable of feeding the card adequately. The GPU’s release date is October 2021, and it is marked as end-of-life, but its performance in Overpower remains competitive at 1080p and 1440p for medium and high presets.

Settings Recommendations

Based on the measured FPS rows, the optimal experience depends on the target resolution and whether the user prioritizes frame rate or visual fidelity. At 1920x1080, the Medium preset delivers 74 FPS average with a min of 63 and max of 85, which is the best balance of smoothness and quality—the High preset only offers 69 FPS, a 5 FPS penalty for marginal visual gains. Low at 1080p yields 118 FPS, which is excellent for high-refresh displays, but the visual compromise may be too steep for a game titled Overpower that likely has detailed environments. Ultra at 1080p drops to 57 FPS, which is still playable but not ideal for fast action sequences.

At 2560x1440, the Medium preset again emerges as the recommended choice, with 66 FPS average and a min of 56, max of 76. High provides 61 FPS, which is close but slightly lower, and Low gives 106 FPS for competitive play. Ultra at 1440p is 51 FPS, which is borderline—it will feel less fluid than Medium, and the 15 FPS gap between Ultra and Medium is substantial. For 4K, the situation is more constrained: Low is the only preset that breaks 90 FPS, while Medium averages 56 FPS, High 52 FPS, and Ultra 43 FPS. None of the 4K presets except Low reach the 60 FPS threshold, so users with 4K displays should either accept Low or consider lowering the resolution.

The data suggests that Medium is the sweet spot for this combo across all three resolutions. At 1080p Medium, the min FPS of 63 ensures that frame drops are rare; at 1440p Medium, the min of 56 is still above the 50 FPS comfort zone; at 4K Medium, the min of 48 dips below 50, which may be noticeable in fast scenes. The Ultra preset is only recommended for 1080p if the user has a 60 Hz display and prioritizes visuals over frame rate, since 57 FPS is close to the refresh cap. Low is the clear choice for esports-style play at 1080p or 1440p, given the 118 and 106 FPS averages respectively.

Measured FPS Breakdown

At 1920x1080, the full measured dataset is as follows: Low averages 118 FPS, Medium averages 74 FPS with a min of 63 and max of 85, High averages 69 FPS, and Ultra averages 57 FPS. The spread from Low to Ultra is 61 FPS, which is the largest of any resolution, indicating that the GPU has ample headroom at 1080p to scale with settings. The Medium preset’s min FPS of 63 is the only min/max data available at 1080p, and it shows a 22 FPS range between min and max, suggesting moderate frame pacing variance.

At 2560x1440, the numbers are: Low averages 106 FPS, Medium averages 66 FPS (min 56, max 76), High averages 61 FPS, and Ultra averages 51 FPS. The gap between Low and Ultra narrows to 55 FPS, showing that the GPU is becoming the limiting factor as pixel count increases. The Medium range of 20 FPS is slightly tighter than at 1080p, which indicates that the CPU is not causing bottlenecks at this resolution—the frame delivery is more consistent.

At 3840x2160, the data shows: Low averages 90 FPS, Medium averages 56 FPS (min 48, max 64), High averages 52 FPS, and Ultra averages 43 FPS. The Low-to-Ultra gap shrinks to 47 FPS, confirming that the GPU is saturated at 4K. The Medium preset’s min FPS of 48 is the lowest min in the entire dataset, and its max of 64 is also the lowest max for Medium across resolutions, indicating that 4K pushes the RX 6600 to its limits. The 16 FPS range between min and max at 4K Medium is also the largest of any Medium preset, which could lead to perceptible stutters in demanding scenes.

The trend across all three resolutions is consistent: each step up in settings costs roughly 10-15 FPS at the same resolution, and each step up in resolution costs 5-15 FPS at the same settings. The most efficient settings-to-performance ratio is Low at 1080p (118 FPS) and the least efficient is Ultra at 4K (43 FPS). The measured data is complete with no missing values for average FPS, and the min/max fields are only populated for Medium presets, so those are the only data points available for frame variance analysis.

How This Combo Ranks

In Overpower, this combination of the AMD Ryzen 7 9800X3D and AMD Radeon RX 6600 is ranked 2894 out of 3713 tested combos. This places it in the bottom 22% of all combinations in the database, which is a direct consequence of the GPU’s modest performance relative to the CPU. The combo rank is based on measured FPS data, and the RX 6600’s 63rd percentile versus all GPUs is far below the CPU’s 87th percentile versus all CPUs, creating an imbalanced pairing.

The CPU’s average benchmark score is 39768, with nearest rivals including the AMD Ryzen 7 PRO 8840HS (39603, deltaPct 0.4), AMD Ryzen AI 9 365 (40048, deltaPct -0.7), and AMD Ryzen 7 7700 (40081, deltaPct -0.8). These deltas are all within 1%, meaning the 9800X3D is statistically tied with those CPUs in synthetic benchmarks, but its 96 MB of shared L3 cache and 5.20 GHz boost clock give it an edge in gaming workloads that is not fully captured by the average score. The GPU’s nearest rivals are all within 0.4% in aggregate score, but in Overpower, the RX 6600 outperforms what those deltas would suggest, given that the measured FPS at 1080p Low exceeds 100 FPS.

The rank of 2894 out of 3713 indicates that most other combos in the database achieve higher average FPS in this game. This is expected because the RX 6600 is a mid-range card, and the database likely includes many high-end GPUs. However, the combo’s performance is not the worst—there are 819 combos ranked lower, which suggests that the CPU’s strength prevents the pairing from being entirely unplayable. The data implies that the bottleneck is overwhelmingly the GPU, as the CPU’s 3DMark scores (10081 for 16 threads, 8252 for 8 threads) are strong, but the GPU’s PassMark G3D score of 15096 is the limiting factor.

FAQ

*Q: What is the highest average FPS this combo can achieve in Overpower?*

A: The highest measured average FPS is 118, achieved at 1920x1080 with Low settings. This is the only preset/resolution combination that exceeds 115 FPS, and it indicates that the GPU is not fully utilized at this setting.

*Q: Is this combo capable of 4K gaming in Overpower?*

A: Yes, but only at Low settings, where it averages 90 FPS. At Medium, High, and Ultra, the averages are 56, 52, and 43 FPS respectively, which are below the 60 FPS target for smooth gameplay.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The AMD Ryzen 7 9800X3D has an average benchmark score of 39768, which is 0.4% higher than the AMD Ryzen 7 PRO 8840HS (39603), 0.7% higher than the AMD Ryzen AI 7 450 (39485), and 0.8% lower than the AMD Ryzen 7 7700 (40081). All deltas are within 1%.

*Q: What is the GPU’s memory bandwidth and how does it affect Overpower?*

A: The RX 6600 has a memory bandwidth of 224.0 GB/s from its 8 GB GDDR6 memory on a 128-bit bus. This bandwidth is sufficient for 1080p and 1440p Medium presets, but at 4K Ultra, the 43 FPS average suggests that bandwidth or capacity is a limiting factor.

Q: Which preset provides the most consistent frame delivery?

A: The Medium preset has min and max FPS data for all three resolutions. At 1080p, the range is 63 to 85 (22 FPS spread); at 1440p, it is 56 to 76 (20 FPS spread); at 4K, it is 48 to 64 (16 FPS spread). The 1440p Medium range is the most consistent relative to its average of 66 FPS.

*Q: How does this combo’s rank in Overpower compare to its component percentiles?*

A: The combo is ranked 2894 out of 3713 (bottom 22%). The CPU is in the 87th percentile versus all CPUs, while the GPU is in the 63rd percentile versus all GPUs. The disparity explains the low combo rank—the GPU drags down overall performance despite the strong CPU.

CPU Role

The AMD Ryzen 7 9800X3D is a desktop processor from the 9000 series, built on the Zen 5 architecture with the Granite Ridge codename. It has 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.20 GHz. The TDP is 120 W, and it uses the AMD Socket AM5, supporting DDR5 memory in a dual-channel configuration with 89.6 GB/s bandwidth. The CPU has 96 MB of shared L3 cache, which is a defining feature of the X3D line and is directly relevant to gaming performance, as larger caches reduce memory latency for frequently accessed data.

In synthetic benchmarks, the CPU scores 23230 in Cinebench R23 multicore and 2080 in single-core, with a Geekbench multicore score of 18696 and single-core of 2964. The PassMark multithread score is 40009, and the single-thread score is 4430. The 3DMark scores show scaling: 2394 for 2 threads, 4669 for 4 threads, 8252 for 8 threads, and 10081 for 16 threads, with the max threads score of 10067 nearly matching the 16-thread score, indicating that the CPU’s performance saturates at 16 threads for this workload. The average benchmark score is 39768, and the CPU ranks in the 87th percentile versus all CPUs.

In Overpower, the CPU’s role is to feed the GPU with draw calls and game logic. The measured FPS data indicates that at 1080p Low, the CPU is not the bottleneck, as the GPU is able to produce 118 FPS. At 4K Low, the 90 FPS average suggests that the CPU is still providing enough instructions, but the GPU’s pixel throughput limits the frame rate. The CPU’s high single-thread performance (2080 in Cinebench R23 single-core) and massive L3 cache are likely why the frame rates do not collapse at lower resolutions—the CPU can keep up with the GPU’s output. However, the data does not isolate CPU-bound scenarios, as even at 1080p Low, the GPU is still the limiting factor, given that the RX 6600’s PassMark G3D score is only 15096.

The nearest CPU rivals in terms of average score are all within 0.8% delta, but the 9800X3D’s 5.20 GHz boost clock and 96 MB L3 cache provide a gaming advantage that is not reflected in those aggregate scores. The CPU’s memory support for DDR5 at 89.6 GB/s bandwidth, along with PCIe Gen 5 for 24 lanes, ensures that the GPU has a high-bandwidth connection, even though the RX 6600 uses PCIe 4.0 x8. The CPU’s production status is Active, with a release date of November 2024, making it a current-generation part that is well-matched to the RX 6600 in terms of avoiding CPU-induced frame drops, but not in terms of overall system balance, as the GPU’s performance ceiling is reached well before the CPU’s.

Hardware Specifications

AMD Ryzen 7 9800X3D

Cores / Threads 8 / 16
Base Clock 4700 MHz
Boost Clock 5200 MHz
TDP 120W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6600

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2491 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 9800X3D + AMD Radeon RX 6600 in Overpower

Resolution Settings Avg FPS
3840x2160 Low 90.0
3840x2160 Medium 56.0
3840x2160 High 52.0
3840x2160 Ultra 43.0
2560x1440 Low 106.0
2560x1440 Medium 66.0
2560x1440 High 61.0
2560x1440 Ultra 51.0
1920x1080 Low 118.0
1920x1080 Medium 74.0
1920x1080 High 69.0
1920x1080 Ultra 57.0

Overpower with Ryzen 7 9800X3D + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RX 6600 + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with Ryzen 7 9800X3D + RX 6600

Explore FPS benchmarks for other games using this same hardware combination.