Overpower

The AMD Ryzen 7 9800X3D paired with the NVIDIA GeForce RTX 4060 delivers a playable but GPU-bound experience in Overpower, with frame rates that scale predictably with resolution and settings. The data indicates that the RTX 4060 is the definitive limiting factor across all tested configurations, as the CPU’s substantial headroom is never fully utilized. While 1080p and 1440p gaming are generally smooth, 4K Ultra dips below the 60 FPS threshold, making this combo best suited for high-refresh-rate 1080p or balanced 1440p play.

Resolution Scaling

The measured FPS data reveals a clear pattern of diminishing returns as resolution increases, confirming that the GPU is the bottleneck. At 1080p Low, the combo achieves an average of 150.4 FPS, which drops to 139.4 FPS at 1440p Low (-7.3%) and further to 118.5 FPS at 4K Low (-21.2% from 1080p). This relatively modest decline at Low settings suggests that even at 4K, the GPU still has enough throughput to maintain high frame rates, but the scaling is not linear.

The picture changes dramatically at higher settings. At 1080p Ultra, the average is 75.8 FPS, which falls to 64.1 FPS at 1440p Ultra (-15.4%) and then to 57.3 FPS at 4K Ultra (-24.4% from 1080p). The steepest drop occurs between 1440p and 4K at Ultra settings, where the 4K resolution demands significantly more pixel throughput than the RTX 4060’s 8 GB of GDDR6 memory and 128-bit bus can efficiently deliver. The data suggests that the GPU’s 272.0 GB/s bandwidth becomes a limiting factor at 4K, especially with Ultra presets that likely increase texture and shader complexity.

At Medium settings, the scaling is more moderate: 95.3 FPS at 1080p, 87.2 FPS at 1440p (-8.5%), and 72.6 FPS at 4K (-23.8%). High settings show a similar trend, with 90.7 FPS at 1080p, 78.5 FPS at 1440p (-13.5%), and 68.7 FPS at 4K (-24.3%). The consistent ~24% drop from 1080p to 4K across Medium, High, and Ultra presets indicates that the resolution scaling is primarily pixel-bound, with the GPU’s shading units (3072) and ROPs (48) being the constraining resources. The 4K Low result of 118.5 FPS proves the CPU can handle the workload, but the GPU cannot sustain high frame rates at 4K with higher visual fidelity.

FAQ

Q: What is the highest average frame rate achievable with this combo?

A: The highest measured average is 150.4 FPS at 1920x1080 with Low settings. This demonstrates the system’s ceiling when the GPU is least stressed.

Q: Can this combo maintain 60 FPS at 4K Ultra?

A: No. At 3840x2160 Ultra, the average FPS is 57.3, which falls short of the 60 FPS target. The 4K High preset also barely exceeds this at 68.7 FPS, but Ultra is not viable for consistent 60 FPS.

Q: How does the RTX 4060 compare to its nearest rival in raw compute?

A: The RTX 4060 has an average benchmark score of 23181, which is 0.6% lower than the AMD Radeon RX 6600M (23321) and 0.7% lower than the NVIDIA GeForce GTX 780 Ti (23338). It is 0.7% higher than the Intel Arc B580 (23021).

Q: What is the performance difference between 1080p and 1440p at High settings?

A: The average FPS drops from 90.7 at 1080p to 78.5 at 1440p, a 13.5% reduction. This is a moderate penalty that still leaves the game playable.

Q: Is the CPU or GPU the primary bottleneck in this game?

A: Benchmark results indicate the GPU is the primary bottleneck. The CPU’s multi-threaded score of 34004 in Cinebench R23 suggests ample headroom, while the GPU’s 66th percentile ranking versus all GPUs indicates it is the weaker link.

Q: What is the rank of this combo among all tested configurations?

A: This combo ranks 979 out of 1744 tested combinations in Overpower, placing it in the middle of the pack.

GPU Role

The NVIDIA GeForce RTX 4060 is the decisive component in this pairing. With 8 GB of GDDR6 memory on a 128-bit bus, it has a memory bandwidth of 272.0 GB/s, which proves adequate for 1080p and 1440p but strained at 4K. The GPU’s boost clock of 2460 MHz and base clock of 1830 MHz, combined with 3072 shading units, deliver a FP32 performance of 15.11 TFLOPS. This raw throughput is sufficient for the game’s action genre at lower resolutions, but the data shows that Ultra settings at 4K reduce the average FPS to 57.3, indicating the GPU is maxed out.

The GPU’s benchmark scores reinforce this interpretation. Its PassMark G3D score is 19545, and its 3DMark Steel Nomad DX12 score is 2302, placing it in the 66th percentile of all GPUs. The nearest rival comparison shows the RTX 4060 is virtually tied with the AMD Radeon RX 6600M (-0.6%) and the NVIDIA GeForce GTX 780 Ti (-0.7%), which suggests that the GPU’s performance class is well-defined. The 8 GB VRAM capacity is likely a limiting factor at 4K Ultra, where high-resolution textures can exceed available memory, causing the GPU to rely on slower memory paging. This is consistent with the sharp FPS drop from 4K High (68.7 FPS) to 4K Ultra (57.3 FPS), a 16.6% decrease that cannot be attributed to resolution alone.

How This Combo Ranks

In the full database of tested combinations, this AMD Ryzen 7 9800X3D + RTX 4060 setup ranks 979 out of 1744 combos in Overpower. This position places it in the lower-middle range of all tested configurations, which is unsurprising given the GPU’s mid-range standing. The CPU, by contrast, ranks in the 90th percentile of all CPUs, with an average benchmark score of 37780. This creates a significant imbalance: the CPU is a top-tier component while the GPU is only slightly above average, and the measured FPS reflects the GPU’s ceiling.

The combo’s rank is more a function of the GPU than the CPU. The RTX 4060’s average score of 23181 is 0.6% below the AMD Radeon RX 6600M, and the data shows that combos with faster GPUs would naturally rank higher. The CPU’s nearest rivals, including the Intel Xeon 6353P (-0.1%) and Intel Core Ultra 5 225 (-0.1%), have nearly identical average scores, indicating that the 9800X3D is not leaving performance on the table. Instead, the GPU’s 8 GB memory and 128-bit bus are the limiting factors that cap the combo’s overall ranking.

Measured FPS Breakdown

At 1920x1080, the full settings sweep shows a clear hierarchy: Low delivers 150.4 FPS, Medium 95.3 FPS, High 90.7 FPS, and Ultra 75.8 FPS. The gap between Medium and High is minimal (4.6 FPS), suggesting that the High preset does not add significant GPU load compared to Medium. The jump from High to Ultra is more substantial, with an 14.9 FPS drop, indicating that Ultra settings enable features that heavily tax the GPU.

Moving to 2560x1440, the averages are 139.4 FPS (Low), 87.2 FPS (Medium), 78.5 FPS (High), and 64.1 FPS (Ultra). The Medium preset at 1440p outperforms High at 1080p by a small margin (87.2 vs 90.7), showing that resolution has a weaker effect than settings. At 3840x2160, the results are 118.5 FPS (Low), 72.6 FPS (Medium), 68.7 FPS (High), and 57.3 FPS (Ultra). The 4K Low result is notable because it exceeds 1440p High (78.5 FPS) by a significant margin, proving that the GPU’s raw throughput is not the issue at lower settings.

Across all resolutions, the Ultra preset consistently delivers the lowest frame rates, with 4K Ultra being the only configuration below 60 FPS. The data shows that the RTX 4060 can handle 1080p Ultra at 75.8 FPS, but 1440p Ultra (64.1 FPS) is marginal, and 4K Ultra is not recommended.

Settings Recommendations

Based on the measured FPS, the optimal experience balances visual quality and frame rate. For 1080p, the High preset at 90.7 FPS is the best choice, offering a smooth experience without the performance penalty of Ultra. The Medium preset at 95.3 FPS is also viable, but High provides better visuals for only a 4.6 FPS cost. At 1080p, Ultra at 75.8 FPS is playable but leaves little headroom for demanding scenes.

For 1440p, the Medium preset at 87.2 FPS is the recommended setting, as it maintains a high frame rate while offering better visual fidelity than Low. High at 78.5 FPS is still smooth, but the 8.7 FPS difference between Medium and High may not justify the visual upgrade for competitive play. Ultra at 64.1 FPS is borderline, and users prioritizing frame rate consistency should avoid it.

For 4K, the Low preset at 118.5 FPS is the only setting that provides a truly smooth experience. Medium at 72.6 FPS is acceptable, but High at 68.7 FPS and Ultra at 57.3 FPS are below the ideal threshold for fast-paced action. The data suggests that 4K gaming with this combo is best suited for Low or Medium settings, with Medium being the sweet spot for those who want better visuals without sacrificing too much performance.

CPU Role

The AMD Ryzen 7 9800X3D is a high-end processor with 8 cores and 16 threads, based on the Zen 5 architecture (Granite Ridge) and built on a 4 nm process. Its base clock of 4.70 GHz and boost clock of 5.20 GHz, combined with 96 MB of shared L3 cache, provide exceptional single-thread and multi-thread performance. Its Cinebench R23 multi-core score of 34004 and single-core score of 4800 place it in the 90th percentile of all CPUs, and its average benchmark score of 37780 is virtually identical to its nearest rivals, including the Intel Core i5-13600KF (-0.7%).

However, in Overpower, the CPU’s performance is largely irrelevant to the final frame rates. The measured FPS differences between resolutions and settings are consistent with GPU-bound behavior, and the CPU’s 16 threads are never fully taxed. The 3DMark 16-thread score of 10081 and max-thread score of 10067 indicate that the CPU has more than enough headroom for this game. The CPU’s 120 W TDP and support for DDR5-89.6 GB/s memory bandwidth are more than sufficient for the game’s requirements. In this combo, the CPU acts as a high-performance foundation that ensures no GPU bottleneck is compounded by processor limitations, but it does not contribute to higher frame rates beyond the GPU’s ability to render. The data confirms that upgrading the GPU would yield far greater FPS gains than any CPU change.