Overpower

The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 4090 delivers a commanding performance profile in Overpower, with the data showing a combination that scales predictably across resolutions while maintaining exceptionally high frame rates. This analysis examines the measured FPS results, the role of each component, and how this specific pairing ranks against the broader field of tested configurations.

Resolution Scaling

The measured frame rates in Overpower reveal a clear and consistent scaling pattern as resolution increases from 1920x1080 to 3840x2160. At the Low preset, the average FPS drops from 299 at 1080p to 267 at 1440p, then to 227 at 4K. This represents a 10.7% decrease from 1080p to 1440p, and a further 15.0% decrease from 1440p to 4K. The overall drop from 1080p Low to 4K Low is 24.1%, indicating that even at lower settings, the resolution increase imposes a measurable but manageable load on the system.

Moving to the High preset, the scaling pattern shifts slightly. The average FPS at 1080p High is 173, which drops to 155 at 1440p (a 10.4% decrease) and then to 131 at 4K (a 15.5% decrease from 1440p). The total reduction from 1080p to 4K at High settings is 24.3%, nearly identical to the Low preset's scaling. This consistency suggests that the performance bottleneck remains relatively stable across these settings, with the GPU handling the increased pixel count in a linear fashion.

The Medium and Ultra presets show similar trends, though with slightly different magnitudes. At Medium, the average FPS goes from 187 at 1080p to 167 at 1440p (a 10.7% drop) and then to 142 at 4K (a 15.0% drop from 1440p). The Ultra preset sees averages of 144 at 1080p, 128 at 1440p (an 11.1% decrease), and 109 at 4K (a 14.8% decrease). Across all four presets, the percentage drop from 1080p to 1440p hovers around 10-11%, while the drop from 1440p to 4K is consistently in the 14-16% range.

This scaling behavior indicates that the RTX 4090's 24 GB of GDDR6X memory and 1.01 TB/s bandwidth are sufficient to feed the rendering pipeline without introducing a memory bandwidth limitation at higher resolutions. The data suggests that the transition from 1440p to 4K imposes a proportionally larger load than the 1080p to 1440p step, which is typical for a GPU-bound scenario where pixel count increases by 2.25 times at each step. The fact that the frame rate drops are smaller than the pixel count increases (e.g., 24.3% FPS drop versus 225% pixel increase from 1080p to 4K) points to the GPU's compute resources being the primary limiting factor rather than memory throughput.

GPU Role

The NVIDIA GeForce RTX 4090 plays the dominant role in Overpower's performance, as evidenced by the consistent frame rates across all tested resolutions. The GPU's 16,384 shading units, 512 texture mapping units, and 176 raster output pipelines provide substantial raw compute power that translates directly into high average FPS figures. At 4K Ultra, the combination still manages 109 average FPS, which is well above the 60 FPS threshold for smooth gameplay, indicating that even the most demanding preset at the highest resolution does not push the GPU to its breaking point.

The RTX 4090's clock speeds—a base of 2235 MHz and a boost of 2520 MHz—contribute to its ability to maintain high frame rates across settings. The boost clock represents a 12.8% increase over the base clock, and benchmark results show the GPU sustains performance without significant throttling. The 128 ray tracing cores and 512 tensor cores, while not directly measured in this game's FPS data, are part of the architectural feature set that allows the card to handle the demands of a modern Action title like Overpower.

The GPU's 24 GB of GDDR6X memory on a 384-bit bus provides 1.01 TB/s of bandwidth. This configuration appears to be more than sufficient for Overpower, as the scaling data shows no signs of a memory capacity or bandwidth wall. Even at 4K with Ultra settings, where texture memory demands are highest, the frame rates remain strong. The GPU's percentile ranking of 88 among all GPUs, with an average benchmark score of 60347, places it in the upper tier of graphics cards, and the nearest rival comparisons show a 0% deltaPct against the Intel Arc Pro A60, a 0.3% delta against the AMD Radeon Pro Vega 48, a -2.5% delta against the AMD Radeon Pro W6600M, and a 2.9% delta against the AMD Radeon PRO V710. These tight margins in synthetic benchmarks suggest the RTX 4090 is competitively positioned, though its real-world advantage in Overpower is clearly demonstrated by the measured FPS data.

How This Combo Ranks

The combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4090 achieves a combo rank of 61 out of 2980 tested combinations in Overpower. This places the pairing in the top 2.0% of all tested configurations, which is a strong showing given the breadth of hardware combinations evaluated. The rank reflects the cumulative performance of both components working together, and the high placement indicates that this setup is well-balanced for this particular game.

To put this rank in context, the CPU alone holds a percentile rank of 94 against all CPUs, with an average benchmark score of 69996. Its nearest rivals include the AMD Ryzen 9 7940HX with a deltaPct of 0.2%, the Intel Core i7-14700KF with a deltaPct of -0.2%, the AMD Ryzen 9 7950X with a deltaPct of 0.7%, and the Intel Core i7-14700K with a deltaPct of 0.9%. These margins are extremely tight, indicating that the Ryzen 7 9700F is performing at a level comparable to much higher-tier processors. Similarly, the GPU's percentile rank of 88 places it well above average, and its nearest rival deltas are all within 3% in either direction.

The combo rank of 61 suggests that while both components are individually strong, the pairing is particularly effective in Overpower. The high rank is likely due to the GPU's ability to push high frame rates at all resolutions, combined with the CPU's capacity to feed the GPU without becoming a bottleneck. In a game like Overpower, where frame rates exceed 100 FPS even at 4K Ultra, the CPU's single-thread performance and core count are critical to avoiding frame pacing issues. The data shows that this combination achieves a rank that is better than 97.95% of other tested combos, indicating that the synergy between the Ryzen 7 9700F and RTX 4090 is exceptional for this game.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combination depend on the user's priority between visual fidelity and frame rate headroom. At 1920x1080, all presets deliver well above 144 FPS, with Low hitting 299, Medium at 187, High at 173, and Ultra at 144. For competitive play or high-refresh-rate displays, the Low preset at 1080p offers the highest average FPS at 299, which is nearly double the Ultra preset's 144. However, the Medium preset at 187 FPS provides a better balance, offering improved visuals while still maintaining a frame rate that exceeds most 144 Hz monitors' capabilities.

Moving to 2560x1440, the data shows that the Medium preset at 167 average FPS is the sweet spot for quality and performance. The High preset at 155 FPS is nearly as strong, and the difference between Medium and High is only 12 FPS (7.7%). The Ultra preset drops to 128 FPS, which is still playable but represents a 23.4% reduction from Medium. At this resolution, the Low preset at 267 FPS is excessive for most users, as it sacrifices visual quality for a frame rate that exceeds the refresh rate of most gaming monitors.

At 3840x2160, the Medium preset at 142 average FPS offers the best combination of visual quality and smoothness, with a minimum FPS of 120 and a maximum of 163. The High preset at 131 FPS is also viable, but the Ultra preset at 109 FPS, while playable, begins to approach the threshold where frame pacing may become noticeable on high-refresh-rate displays. For 4K gaming, the Medium preset is recommended as it provides a 30.3% FPS increase over Ultra while still delivering a visually rich experience. The Low preset at 4K achieves 227 FPS but negates the purpose of high-resolution gaming by significantly reducing visual detail.

The measured minimum and maximum FPS values for the Medium preset provide additional insight. At 4K, the range from 120 to 163 FPS (a 35.8% spread) indicates some variability, but the average of 142 FPS suggests the frame times are generally consistent. At 1440p, the Medium preset ranges from 142 to 192 FPS (a 35.2% spread), and at 1080p, it ranges from 159 to 215 FPS (a 35.2% spread). This consistent variability across resolutions indicates that the game's frame pacing is stable and not introducing additional stutter at higher settings.

FAQ

Q: What is the highest average FPS achieved by this combination in Overpower?

A: The highest measured average FPS is 299, achieved at 1920x1080 resolution with the Low preset. This represents the maximum frame rate output for this combination across all tested settings and resolutions.

Q: How does the 4K Ultra preset compare to the 1080p Low preset in terms of average FPS?

A: The 4K Ultra preset delivers an average FPS of 109, while the 1080p Low preset delivers 299. This represents a 63.5% reduction in average FPS when moving from the lowest resolution and settings to the highest, indicating the significant performance cost of maximum visual fidelity at 4K.

Q: What is the combo rank of this pairing in Overpower?

A: This combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4090 ranks 61 out of 2980 tested combos, placing it in the top 2.0% of all configurations tested for this game.

Q: Which preset provides the most stable frame rate at 1440p based on the available data?

A: The Medium preset at 2560x1440 shows the most detailed data with a minimum FPS of 142, a maximum of 192, and an average of 167. The 50 FPS range between minimum and maximum indicates good frame pacing, though the High preset at 155 average FPS may offer a more consistent experience with less variability.

Q: How does the CPU's benchmark score compare to its nearest rival?

A: The Ryzen 7 9700F has an average benchmark score of 69996, which is 0.2% higher than the AMD Ryzen 9 7940HX's 69875, 0.2% lower than the Intel Core i7-14700KF's 70163, 0.7% higher than the AMD Ryzen 9 7950X's 69515, and 0.9% higher than the Intel Core i7-14700K's 69355.

Q: What is the lowest average FPS recorded for this combination?

A: The lowest average FPS recorded is 109, which occurs at 3840x2160 resolution with the Ultra preset. This is still well above the standard 60 FPS target for smooth gameplay, demonstrating the combination's capability at the most demanding settings.

CPU Role

The AMD Ryzen 7 9700F, with its 8 cores and 16 threads, plays a supporting but essential role in Overpower's performance. The CPU's Zen 5 architecture, built on a 4 nm process by TSMC, features a base clock of 3.80 GHz and a boost clock of 5.50 GHz. This 44.7% boost capability allows the processor to respond dynamically to workload demands, ensuring that single-threaded tasks are handled efficiently. The 32 MB of shared L3 cache and 1 MB per-core L2 cache provide fast access to frequently used data, which is critical for maintaining high frame rates in a fast-paced Action game.

The CPU's benchmark results show strong performance across various workloads. In PassMark tests, the Ryzen 7 9700F achieves a single-thread score of 4691 and a multithread score of 36470. The floating-point math score of 77955 and integer math score of 120788 indicate robust arithmetic processing capability. The data compression score of 421988 and encryption score of 21488 further demonstrate the CPU's versatility. These scores contribute to the CPU's average benchmark score of 69996, which places it in the 94th percentile against all CPUs.

In the context of Overpower, the CPU's role becomes apparent when examining the frame rates at lower resolutions. At 1080p Low, the average FPS reaches 299, which is near the limit of what most displays can show. This high frame rate suggests that the CPU is capable of feeding the GPU with enough data to maintain such performance, avoiding a CPU bottleneck that would cap frame rates below this level. The CPU's boost clock of 5.50 GHz is particularly relevant for games like Overpower that rely on single-threaded performance for game logic and physics calculations. The 16 threads also allow for efficient background processing, ensuring that the game's rendering thread receives priority.

The CPU's memory support for DDR5 with dual-channel configuration and 89.6 GB/s bandwidth provides adequate data throughput for the game's streaming and asset loading needs. The PCIe Gen 5 interface with 24 lanes ensures that the GPU has sufficient bandwidth for data transfer, though the RTX 4090 uses a PCIe 4.0 x16 interface, which is backward compatible. The 65W TDP of the Ryzen 7 9700F is notably low for a desktop processor with this level of performance, suggesting efficient power management that could reduce thermal throttling in extended gaming sessions.

Measured FPS Breakdown

The measured FPS data for this combination in Overpower provides a comprehensive picture of performance across resolutions and settings. At 1920x1080, the Low preset delivers an average FPS of 299, which is the highest recorded value across all tests. The Medium preset at 1080p achieves an average of 187 FPS, with a minimum of 159 and a maximum of 215. The High preset at 1080p reaches 173 FPS average, while the Ultra preset drops to 144 FPS average. The progression from Low to Ultra at 1080p shows a 51.8% reduction in average FPS, highlighting the significant impact of visual settings on performance.

At 2560x1440, the Low preset maintains a high average of 267 FPS, which is 10.7% lower than at 1080p. The Medium preset at 1440p achieves 167 FPS average, with a range of 142 to 192 FPS. The High preset delivers 155 FPS average, and the Ultra preset drops to 128 FPS average. The scaling from Low to Ultra at 1440p shows a 52.1% reduction in average FPS, a slightly larger drop than at 1080p, indicating that the Ultra preset is more demanding at higher resolutions. The transition from 1080p to 1440p at each preset shows consistent 10-11% reductions, with Low going from 299 to 267, Medium from 187 to 167, High from 173 to 155, and Ultra from 144 to 128.

At 3840x2160, the Low preset achieves 227 FPS average, which is 15.0% lower than at 1440p. The Medium preset at 4K delivers 142 FPS average, with a minimum of 120 and a maximum of 163. The High preset at 4K reaches 131 FPS average, and the Ultra preset drops to 109 FPS average. The scaling from 1440p to 4K shows 14.8-15.5% reductions across all presets, with Low going from 267 to 227, Medium from 167 to 142, High from 155 to 131, and Ultra from 128 to 109. The cumulative reduction from 1080p to 4K at each preset is 24.1% for Low, 24.1% for Medium, 24.3% for High, and 24.3% for Ultra, demonstrating a remarkably consistent scaling pattern across all settings.

The minimum and maximum FPS data for the Medium preset at all three resolutions provides insight into frame time consistency. At 1080p, the range is 159 to 215 FPS, a 35.2% spread around the 187 average. At 1440p, the range is 142 to 192 FPS, a 35.2% spread around the 167 average. At 4K, the range is 120 to 163 FPS, a 35.8% spread around the 142 average. This consistency in variability across resolutions suggests that the game's frame pacing is stable and not introducing additional stutter at higher settings. The data indicates that the Medium preset offers the most balanced experience, with the measured minimum FPS at 4K (120) still exceeding the typical 60 FPS target by a significant margin, ensuring smooth gameplay even during intense action sequences.