Overpower

Overpower, an Action title from August 2023, presents a demanding workload that scales significantly with resolution. This analysis covers the AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 4080, based on measured frame rates at 1080p, 1440p, and 4K across four quality presets. The data reveals a system that is exceptionally capable at high refresh rates, but the balance between CPU and GPU shifts dramatically as resolution increases. This combo ranks 201st out of 3713 tested combinations, placing it in the top tier of systems for this specific title.

Resolution Scaling

The measured results show a clear and consistent pattern: frame rates drop significantly as resolution increases, which indicates that the GPU becomes the primary limiting factor at higher pixel counts. At 1080p with Low settings, the combo achieves an average of 271 FPS. This drops to 241 FPS at 1440p, a reduction of 30 FPS, and then further to 205 FPS at 4K, another 36 FPS lower. This scaling pattern suggests that at 1080p, the CPU is still capable of feeding the GPU, but the gap between resolutions widens as the GPU's workload becomes more intensive.

Looking at High settings, the trend continues. The average frame rate at 1080p is 157 FPS. At 1440p, it falls to 140 FPS, and at 4K, it reaches 119 FPS. The percentage drop from 1080p to 1440p is roughly 11%, while the drop from 1440p to 4K is about 15%. This non-linear decline is typical of a GPU-bound scenario; the rendering cost per pixel increases exponentially, and the RTX 4080's compute resources are being fully utilized at 4K.

The Ultra preset shows the most dramatic scaling. Starting at 130 FPS at 1080p, the average falls to 116 FPS at 1440p and then to 99 FPS at 4K. The difference between 1080p and 4K here is 31 FPS, a 24% reduction. This is a clear indication that the Ultra settings, which likely include more demanding effects like ray tracing or higher shadow quality, place a heavy load on the GPU. The Ryzen 7 9700F, with its 8 cores and 16 threads, appears to have sufficient headroom in these scenarios, as the performance drop is primarily tied to the resolution and preset, not CPU limitations.

The data strongly indicates that at 1080p, the system is approaching a CPU limit, particularly at Low settings where the 271 FPS figure is exceptionally high. However, the gap between 1080p and 1440p at Low settings (30 FPS) is smaller than the gap between 1440p and 4K (36 FPS), confirming that the GPU's rendering capabilities are the bottleneck at higher resolutions. For a user with a 144Hz monitor, 4K High at 119 FPS is playable, but 1440p High at 140 FPS or 1080p High at 157 FPS provides a smoother experience with more headroom for frame time spikes.

GPU Role

The NVIDIA GeForce RTX 4080 is the dominant component in this pairing for Overpower. It features 16 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 716.8 GB/s. This large memory pool and high bandwidth are crucial for 4K gaming, where textures and geometry data are massive. The 4K Ultra result of 99 FPS, while the lowest in the set, still demonstrates that the 16 GB frame buffer is not being exhausted, as the game remains playable rather than stuttering due to memory swapping.

The GPU's clock speeds are a key factor. With a base clock of 2205 MHz and a boost clock of 2505 MHz, the RTX 4080 can sustain high frequencies under load. The Ada Lovelace architecture, built on a 5 nm process, allows for these high clocks while managing the 320 W TDP. The shading units (9728) and texture mapping units (304) are directly responsible for the raw pixel-pushing power seen in the benchmarks. For instance, the jump from Medium to High at 4K shows a 9 FPS average decrease (128 to 119), which is relatively minor, whereas the jump from High to Ultra shows a 20 FPS decrease (119 to 99), indicating that Ultra settings introduce effects that heavily tax the GPU's ROPS (112) and RT cores (76).

The RTX 4080's performance in this game is solid, as indicated by its average benchmark score of 54247, which places it in the 86th percentile of all GPUs. Its nearest rival, the RTX 4080 SUPER, scores nearly identically with a deltaPct of only 0.1%, meaning users should not expect any noticeable difference between the two in Overpower. The data shows that the GPU is the clear performance driver; when comparing the 1080p Low (271 FPS) to the 4K Ultra (99 FPS), the 172 FPS difference is almost entirely attributable to the GPU's workload scaling with resolution and settings.

Settings Recommendations

Based on the measured rows, the optimal balance of visual fidelity and performance is found at the High preset. At 4K, High delivers an average of 119 FPS, which is well above the 60 FPS standard for smooth gameplay and only 20 FPS short of the Medium preset's 128 FPS. The visual improvement from Medium to High is typically substantial in modern titles, making the 9 FPS cost at 4K a worthwhile trade-off. At 1440p, High yields 140 FPS, offering a significant boost over the 116 FPS of Ultra while still providing excellent image quality.

For users with high refresh rate monitors (144Hz or higher), the Low preset at 1440p is the only setting that achieves a truly high frame rate, hitting 241 FPS. However, this comes with a significant reduction in visual quality. A better compromise is High at 1440p, which provides 140 FPS, likely enough to be near or at the refresh rate limit of many 1440p panels and far more visually appealing than Low.

The Ultra preset is the most demanding, and the data suggests it is best reserved for 1080p displays. At 1080p Ultra, the combo achieves 130 FPS, which is still very playable. At 1440p Ultra, the 116 FPS average is acceptable, but the 4K Ultra result of 99 FPS indicates that this preset is not ideal for 4K gaming if you want to maintain a high refresh rate. The Medium preset, with its min FPS of 109 at 4K and 128 at 1440p, provides the most consistent frame pacing of the tested presets, but its average FPS is only slightly higher than High, making High the clear winner for overall experience.

How This Combo Ranks

The combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4080 achieves a rank of 201 out of 3713 tested combos in Overpower. This places it in the top 5.4% of all systems tested, indicating a very high level of performance. This ranking is expected given the strengths of both components. The CPU's average benchmark score is 69996, which is in the 94th percentile of all CPUs, while the GPU's score of 54247 is in the 86th percentile of GPUs. The combination of two top-tier components results in a system that excels in this game.

The CPU's nearest rivals include the AMD Ryzen 9 7940HX (deltaPct 0.2%), the Intel Core i7-14700KF (deltaPct -0.2%), and the AMD Ryzen 9 7950X (deltaPct 0.7%). These differences are negligible, meaning the Ryzen 7 9700F is effectively on par with these high-end processors in general compute tasks. Similarly, the GPU is nearly identical to the RTX 4080 SUPER (deltaPct 0.1%). This suggests that the 201st rank is not due to a bottleneck in either component but rather reflects the absolute performance ceiling of this hardware combination.

The rank is a holistic measure of the system's ability to run this specific game. The measured FPS data supports this ranking; the lowest average FPS recorded across all settings and resolutions is 99 FPS (4K Ultra), which is still a very strong result. The combo's position in the top 200 indicates that it is a high-end solution capable of handling Overpower at maximum settings in most scenarios, with only 4K Ultra pushing it below the 100 FPS mark. This rank confirms the balanced nature of the pairing, where the 8-core/16-thread CPU does not hold back the GPU.

FAQ

Q: What is the best resolution to play Overpower with this combo for a 144Hz monitor?

A: For a 144Hz display, 1440p High is the optimal choice, delivering an average of 140 FPS. While 1080p Low hits 271 FPS, the visual compromise is steep. 4K High at 119 FPS is a viable alternative, but it will not fully saturate a 144Hz panel.

Q: How much performance is lost when switching from 1080p to 4K on the High preset?

A: The average frame rate drops from 157 FPS at 1080p to 119 FPS at 4K, a reduction of 38 FPS. This represents a 24% decrease in performance, indicating that the RTX 4080 is the limiting factor at higher resolutions.

Q: Is the Ultra preset playable at 4K?

A: Yes, it is playable. The measured average at 4K Ultra is 99 FPS, which is above the 60 FPS threshold for smooth gameplay. However, it is noticeably slower than the High preset (119 FPS) and may not be suitable for competitive play.

Q: How does this combo compare to one with an RTX 4080 SUPER?

A: According to the data, the RTX 4080 and RTX 4080 SUPER have nearly identical average benchmark scores, with a deltaPct of 0.1% in favor of the standard 4080. In practical terms, you would not see a measurable difference in Overpower.

Q: Is the Ryzen 7 9700F a bottleneck for the RTX 4080 in this game?

A: The data suggests not. At 1080p Low, the 271 FPS result indicates the CPU is capable of high throughput. The performance scaling from 1080p to 4K is consistent with GPU-bound behavior, showing that the CPU has sufficient headroom.

Q: What is the most consistent preset in terms of frame rate stability?

A: The Medium preset is the most consistent, as it is the only one with recorded minimum FPS values (e.g., 109 at 4K, 128 at 1440p, 144 at 1080p). This suggests fewer frame time spikes compared to other presets, which do not have min FPS data recorded.

Measured FPS Breakdown

This section provides a complete listing of all measured frame rates for the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4080 combination in Overpower.

4K (3840x2160):

• Ultra: Average 99 FPS. The most demanding setting, pushing the GPU to its limits.
• High: Average 119 FPS. A significant 20 FPS improvement over Ultra, making it the recommended 4K preset.
• Medium: Average 128 FPS, with a minimum of 109 FPS and a maximum of 147 FPS. The highest average at 4K among all presets.
• Low: Average 205 FPS. A massive jump, showing the GPU's raw power when visual effects are minimized.

1440p (2560x1440):

• Ultra: Average 116 FPS. A 17 FPS increase over the 4K result, showing better GPU headroom.
• High: Average 140 FPS. A strong result for high refresh rate 1440p gaming.
• Medium: Average 151 FPS, with a minimum of 128 FPS and a maximum of 173 FPS. Provides the best balance of quality and speed at this resolution.
• Low: Average 241 FPS. Nears the 240Hz refresh rate territory, ideal for esports.

1080p (1920x1080):

• Ultra: Average 130 FPS. The only preset at 1080p that drops below the 140 FPS mark, still smooth.
• High: Average 157 FPS. A great experience for standard high refresh rate monitors.
• Medium: Average 169 FPS, with a minimum of 144 FPS and a maximum of 194 FPS. Offers very high frame rates with decent quality.
• Low: Average 271 FPS. The highest measured frame rate in the entire dataset, maximizing the CPU-GPU pipeline.