Overpower

Overpower is a demanding action title that heavily favors the GPU, and the combination of the AMD Ryzen 7 5800XT with the Intel Arc B390 produces a system that is strictly limited by its graphics solution. The data shows that this pairing is only capable of delivering playable frame rates at the lowest settings, with the Ultra preset proving to be almost entirely unplayable across all tested resolutions. The Intel Arc B390, which benchmarks in the 9th percentile of all GPUs, is the primary bottleneck, while the Ryzen 7 5800XT provides ample headroom that is left largely unused.

Settings Recommendations

The measured FPS data is clear: the Low settings preset is the only viable option for a consistently playable experience with this hardware configuration. At 1920x1080, the Low preset delivers an average of 72 FPS, which is the only average frame rate above 60 FPS in the entire dataset. This is a full 30 FPS higher than the next best preset at the same resolution, which is Medium at 45 FPS. This substantial gap indicates that the graphics card is completely overwhelmed by the additional rendering work required by higher presets.

While the Medium preset at 1920x1080, with an average of 45 FPS and a minimum of 38 FPS, could be considered borderline playable for some users, the Low preset is the recommended choice for a smooth experience. The jump from Low to Medium costs 27 FPS, a 37.5% drop in performance, which is a severe penalty for the visual improvements offered. At higher resolutions, the situation becomes more critical. At 2560x1440, the Low preset averages 64 FPS, still comfortably above the 60 FPS target. However, the Medium preset drops to 40 FPS, and at 3840x2160, even Low settings only manage an average of 54 FPS.

The Ultra preset is not recommended for any scenario. The data shows that it produces an average of 35 FPS at 1080p, 31 FPS at 1440p, and 26 FPS at 4K. These numbers are all well below the threshold for smooth gameplay and indicate that the Intel Arc B390 is not capable of handling the maximum visual fidelity of Overpower. The High preset is also a poor choice, as it performs only marginally better than Medium and comes with a significant performance cost. For users who prioritize a stable frame rate, the Low preset is the only logical choice. For those who can tolerate lower frame rates, Medium at 1080p is the maximum setting that should be considered, though it will still present noticeable dips in performance.

CPU Role

The AMD Ryzen 7 5800XT is a high-performance desktop processor with 8 cores and 16 threads, based on the Zen 3 architecture. Its benchmark scores are exceptionally strong, with a Cinebench R23 multi-core score of 23794 and a single-core score of 3359. It holds an 81st percentile ranking among all CPUs, and its nearest rivals include the AMD Ryzen 7 7840H and the AMD Ryzen 5 9600X, with performance deltas of 0% and 0.6% respectively. This indicates that the CPU is a very capable component that should not be a limiting factor in most gaming scenarios.

However, in Overpower, the data suggests that the CPU's potential is largely untapped. The system's frame rates are consistently low across all resolutions, and the pattern of performance scaling is typical of a GPU-bound system. For instance, when moving from the Medium to the Ultra preset at 1920x1080, the average FPS drops from 45 to 35. This 10 FPS drop is caused by the increased graphical load, not by CPU limitations. The processor's high multi-threaded performance, evidenced by a Passmark multi-thread score of 28053, is more than sufficient to handle the game's logic and physics at these low frame rates.

The single-thread performance of the Ryzen 7 5800XT, with a 3DMark single-thread score of 959 and a Cinebench R23 single-core score of 3359, is also more than adequate. Even if a game is sensitive to single-thread performance, the 5800XT's capabilities are far beyond what would be required to achieve the 72 FPS maximum seen in the data. The bottleneck is unequivocally the Intel Arc B390, which cannot render frames fast enough to keep the CPU busy. The data indicates that this system is severely imbalanced for Overpower, with the CPU's power being wasted due to the GPU's inability to keep up.

GPU Role

The Intel Arc B390 is the definitive limiting component in this system. Based on the Xe3-LPG architecture and built on a 3 nm process, it features 1536 shading units, 48 TMUs, and 24 ROPs. Its performance, however, is minimal. It scores a 9th percentile ranking among all GPUs, and its average benchmark score of 1482 places it in the company of legacy, low-end graphics cards like the NVIDIA GeForce GT 520MX and the NVIDIA GeForce GT 710, with performance deltas of 1.3% and 2.7% respectively. This benchmark data categorically proves that the B390 is an entry-level graphics solution.

The GPU's memory configuration is also a significant weakness. It uses "System Shared" memory, meaning it relies on the system's main DDR4 RAM rather than having its own dedicated VRAM. The memory bandwidth is listed as "System Dependent," which means its performance will vary based on the system memory configuration. This architecture is common for integrated graphics, which is what the B390 effectively is, given its "IGP" slot width and bus interface. This lack of dedicated memory is a major contributor to its poor performance in a memory-intensive game like Overpower.

The impact of this GPU is starkly visible in the measured FPS. The GPU's only benchmark score is 1482 in 3DMark Steel Nomad, a DX12 test, and its performance in Overpower reflects this low level of capability. At 1920x1080 with Ultra settings, the system averages only 35 FPS. This demonstrates that the GPU's raw compute power, rated at 7.680 TFLOPS FP32, is insufficient for the game's highest demands. The GPU is the primary reason why the system's performance is so low, and no amount of CPU headroom can compensate for its fundamental lack of rendering power.

FAQ

Q: What is the best resolution to play Overpower with this system?

A: The data indicates that 1920x1080 is the best resolution, as it is the only one where the system can achieve an average frame rate above 60 FPS (72 FPS on Low settings). At 2560x1440, the maximum average frame rate drops to 64 FPS, and at 3840x2160, it falls to 54 FPS, both on the Low preset.

Q: Can this system run Overpower at 4K resolution?

A: Technically yes, but not at a playable level. At 3840x2160, the best average frame rate is 54 FPS on Low settings. The Medium preset averages 34 FPS, and the Ultra preset averages only 26 FPS. These performance levels are generally considered too low for a smooth gaming experience.

Q: Is the AMD Ryzen 7 5800XT a good match for the Intel Arc B390 in this game?

A: No. The data shows a severe bottleneck. The Ryzen 7 5800XT is a high-end CPU, ranking in the 81st percentile, while the Intel Arc B390 is in the 9th percentile. The CPU's performance is far beyond what the GPU can utilize, meaning the system's frame rates are almost entirely dictated by the GPU's limitations.

Q: How much performance is lost when moving from Low to Ultra settings?

A: The performance loss is substantial. At 1920x1080, the average frame rate drops from 72 FPS on Low to 35 FPS on Ultra, a decrease of 37 FPS. At 2560x1440, it drops by 33 FPS (from 64 to 31 FPS), and at 3840x2160, it drops by 28 FPS (from 54 to 26 FPS). This indicates the GPU cannot handle the increased load.

Q: What are the minimum and maximum frame rates recorded for this system?

A: The dataset includes minimum and maximum frame rate data only for the Medium preset. At 1920x1080, the frame rate ranges from 38 to 52 FPS. At 2560x1440, it ranges from 34 to 46 FPS, and at 3840x2160, it ranges from 29 to 39 FPS.

Q: How does this system compare to its closest rivals in terms of raw performance?

A: The Intel Arc B390's average benchmark score is 1482, with its nearest rival, the NVIDIA GeForce GT 520MX, scoring 1463 (a 1.3% difference). The CPU is comparatively much stronger; its nearest rival, the AMD Ryzen 7 7840H, has an average score of 29868, essentially matching the 5800XT's performance.

Resolution Scaling

The performance scaling from 1920x1080 to 3840x2160 confirms that the system is entirely GPU-bound. The data shows a clear and consistent drop in frame rates as the resolution increases, which is a classic indicator that the rendering pipeline is limited by the graphics processor. For example, on the Low settings preset, the average frame rate falls from 72 FPS at 1080p to 64 FPS at 1440p, and finally to 54 FPS at 4K. This represents a 25% total performance drop from 1080p to 4K, which is a relatively small penalty, suggesting the GPU is already saturated even at the lowest resolution.

The trend is even more pronounced on higher settings. On the Medium preset, the average frame rate drops from 45 FPS at 1080p to 40 FPS at 1440p and then to 34 FPS at 4K. This is a 24.4% drop from 1080p to 4K. With the High preset, performance falls from 42 FPS at 1080p to 37 FPS at 1440p and 32 FPS at 4K, a 23.8% drop. These relatively modest percentage drops indicate that the GPU is so weak that even at 1080p, it is struggling to maintain a high frame rate, and the additional pixel count at higher resolutions does not proportionally increase the workload because the system is already near its performance ceiling.

This pattern strongly suggests that the limiting component is the Intel Arc B390. If the CPU were the bottleneck, we would expect to see very similar frame rates across different resolutions, as the CPU's workload (game logic, physics) does not change with resolution. Instead, we see a consistent decline in performance with each resolution increase, which is the signature of a GPU that is being asked to render more pixels than it can handle. The Ryzen 7 5800XT, with its high benchmark scores, is clearly not the constraint here.

Measured FPS Breakdown

The following is the complete breakdown of measured average frame rates for the AMD Ryzen 7 5800XT and Intel Arc B390 combination in Overpower, as provided by the data.

1920x1080 (1080p):

• Low: The average frame rate is 72 FPS. This is the highest average frame rate recorded for this system and is the only configuration to hit a playable threshold.
• Medium: The average frame rate is 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS. This shows a significant 27 FPS drop from Low.
• High: The average frame rate is 42 FPS. This is only 3 FPS lower than Medium, showing a diminishing return for the extra graphical load.
• Ultra: The average frame rate is 35 FPS. This is the lowest average at 1080p, representing a 37 FPS drop from the Low preset.

2560x1440 (1440p):

• Low: The average frame rate is 64 FPS. This is an 8 FPS drop from the same settings at 1080p, but still above the 60 FPS target.
• Medium: The average frame rate is 40 FPS, with a minimum of 34 FPS and a maximum of 46 FPS. This is a 5 FPS drop from the 1080p Medium result.
• High: The average frame rate is 37 FPS. This is a 5 FPS drop from the 1080p High result.
• Ultra: The average frame rate is 31 FPS. This is a 4 FPS drop from the 1080p Ultra result.

3840x2160 (4K):

• Low: The average frame rate is 54 FPS. This is a 10 FPS drop from the 1440p Low result and an 18 FPS drop from the 1080p Low result.
• Medium: The average frame rate is 34 FPS, with a minimum of 29 FPS and a maximum of 39 FPS. This is a 6 FPS drop from the 1440p Medium result.
• High: The average frame rate is 32 FPS. This is a 5 FPS drop from the 1440p High result.
• Ultra: The average frame rate is 26 FPS. This is the lowest average frame rate recorded in the entire dataset, a 5 FPS drop from the 1440p Ultra result.

The data consistently shows that the Low preset is the only one that provides a smooth experience, and even then, only at 1080p and 1440p. The combination of this CPU and GPU is fundamentally unsuited for high-fidelity gaming in Overpower, with the GPU serving as an insurmountable bottleneck.