Overpower

The AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4060 pairing delivers a robust 1080p and 1440p experience in Overpower, with the data indicating a system that scales predictably across resolutions and settings. The combination ranks in the 54th percentile of tested configurations in this title, placing it firmly in the mid-range tier for performance.

Resolution Scaling

The measured frame rates reveal a clear pattern of diminishing returns as resolution increases, a hallmark of GPU-bound workloads at higher pixel counts. At High settings, the average frame rate drops from 89 FPS at 1920x1080 to 79 FPS at 2560x1440, a 11.2% reduction. Moving to 3840x2160, the average falls further to 67 FPS, representing a 24.7% decrease from the 1080p baseline. This scaling curve suggests the RTX 4060 is the primary limiting factor at 4K, while the CPU has ample headroom to feed frames at lower resolutions.

The Ultra preset shows a similar trajectory but with lower absolute values. The average frame rate at 1080p is 74 FPS, which drops to 66 FPS at 1440p and then to 56 FPS at 4K. The delta between 1080p and 4K on Ultra is 24.3%, nearly identical to the High preset's scaling. This consistency indicates that the rendering load scales proportionally with pixel count, and the system's bottleneck remains consistent across these quality levels.

Interestingly, the Low preset exhibits the steepest relative drop when moving to 4K. At 1080p, the average is 153 FPS, which is exceptionally high. At 1440p, it drops to 137 FPS, and at 4K, it lands at 116 FPS. The 24.2% reduction from 1080p to 4K is comparable to the other presets, but the absolute difference of 37 FPS is the largest observed. This suggests that even at Low settings, where the CPU typically plays a larger role, the GPU's memory bandwidth and compute limits become apparent at 4K, preventing the frame rate from scaling linearly with the reduced graphical workload.

The Medium preset provides the most granular data, including minimum and maximum frame rates. At 1080p, the average is 96 FPS with a minimum of 81 FPS and a maximum of 110 FPS. At 1440p, the average drops to 85 FPS (min 73, max 98), and at 4K, it reaches 73 FPS (min 62, max 84). The narrowing gap between minimum and maximum frame rates at higher resolutions (a 29 FPS spread at 1080p versus a 22 FPS spread at 4K) indicates that the frame pacing becomes more consistent as the GPU becomes the bottleneck, reducing the likelihood of CPU-driven stutters.

CPU Role

The AMD Ryzen 7 5700 is an 8-core, 16-thread processor based on the Zen 3 architecture. Its base clock of 3.70 GHz and boost clock of 4.60 GHz provide a solid foundation for gaming. In synthetic benchmarks, the processor scores 901 in 3dmark_single_thread and 6628 in 3dmark_16_threads, indicating strong single-core performance that is essential for frame generation and adequate multi-threaded capability for background tasks.

The CPU's performance class, as measured by its average benchmark score of 25517, places it in the 78th percentile of all CPUs. Its nearest rivals include the Intel Xeon D-2752TER (avg score 25530, delta -0.1%), AMD Ryzen 5 7640U (avg 25485, delta 0.1%), and AMD Ryzen 5 6600H (avg 25550, delta -0.1%). These rivals are within 0.3% of the Ryzen 7 5700's average score, meaning the processor is effectively locked in a statistical tie with these alternatives in general compute performance.

In Overpower, the CPU's role appears to be secondary to the GPU at higher resolutions. The frame rate differences between 1080p and 4K are substantial, indicating that the RTX 4060 is the limiting factor. However, the high frame rates at 1080p Low (153 FPS) suggest that the Ryzen 7 5700 is capable of feeding the GPU with enough data to maintain triple-digit frame rates. The Cinebench R23 multicore score of 20655 also suggests that the processor will not cause bottlenecks in CPU-intensive scenarios, such as complex physics calculations or large numbers of on-screen entities, even if those are not the primary constraint in this particular title.

How This Combo Ranks

The combination of the Ryzen 7 5700 and RTX 4060 achieves a rank of 2005 out of 3713 tested combos in Overpower. This placement in the 54th percentile indicates that while this system is not at the top of the performance charts, it outperforms more than half of the configurations tested. The ranking reflects a balanced pairing where neither component is drastically over- or under-powered relative to the other.

The GPU's percentile ranking is 61st among all GPUs, with an average benchmark score of 17639. Its nearest rivals are the AMD Radeon HD 7790 (avg 17666, delta -0.2%), AMD Radeon 780M (avg 17588, delta 0.3%), and AMD Radeon Pro 560 (avg 17551, delta 0.5%). These rivals are all within 0.7% of the RTX 4060's average score, indicating that the GPU is capable of trading blows with these older or integrated solutions in raw compute benchmarks, though its modern feature set may provide advantages in actual game workloads.

The CPU's 78th percentile ranking is significantly higher than the GPU's 61st percentile. This disparity suggests that the processor has more headroom relative to its peers than the graphics card does. In Overpower, this means that if the GPU were upgraded to a more powerful model, the Ryzen 7 5700 would likely be able to support higher frame rates without becoming a bottleneck, particularly at lower resolutions. Conversely, the current GPU is the primary limiter, keeping the combo's rank in the mid-range despite the CPU's stronger relative standing.

Measured FPS Breakdown

The measured frame rates for this combo are as follows:

1920x1080 (1080p)

• Low: Average 153 FPS
• Medium: Average 96 FPS (min 81, max 110)
• High: Average 89 FPS
• Ultra: Average 74 FPS

2560x1440 (1440p)

• Low: Average 137 FPS
• Medium: Average 85 FPS (min 73, max 98)
• High: Average 79 FPS
• Ultra: Average 66 FPS

3840x2160 (4K)

• Low: Average 116 FPS
• Medium: Average 73 FPS (min 62, max 84)
• High: Average 67 FPS
• Ultra: Average 56 FPS

The data shows that the jump from Low to Medium settings carries a significant performance cost at every resolution. At 1080p, the average drops by 57 FPS (153 to 96), which is a 37.3% reduction. At 1440p, the drop is 52 FPS (137 to 85), a 38.0% reduction, and at 4K, the drop is 43 FPS (116 to 73), a 37.1% reduction. This consistent percentage drop suggests that Medium settings introduce a similar relative workload increase regardless of resolution.

The transition from Medium to High is less punishing. At 1080p, the average drops by 7 FPS (96 to 89), a 7.3% reduction. At 1440p, the drop is 6 FPS (85 to 79), a 7.1% reduction, and at 4K, the drop is 6 FPS (73 to 67), an 8.2% reduction. This indicates that High settings add a modest amount of graphical fidelity for a relatively small performance penalty.

Moving from High to Ultra results in a more noticeable drop. At 1080p, the average falls by 15 FPS (89 to 74), a 16.9% reduction. At 1440p, the drop is 13 FPS (79 to 66), a 16.5% reduction, and at 4K, the drop is 11 FPS (67 to 56), a 16.4% reduction. The Ultra preset demands a substantial performance tax over High, likely due to advanced lighting or shadow effects that are computationally expensive.

FAQ

Q: What is the average frame rate at 1440p on High settings?

A: The average frame rate at 2560x1440 on High settings is 79 FPS.

Q: Is the CPU or GPU the limiting factor at 4K resolution?

A: The data indicates the GPU is the primary limiting factor at 4K. The frame rate drops significantly from 1080p to 4K across all settings, and the GPU's 61st percentile ranking is lower than the CPU's 78th percentile, suggesting the graphics card is the bottleneck.

Q: How much performance is gained by dropping from High to Medium settings at 1080p?

A: The average frame rate increases from 89 FPS on High to 96 FPS on Medium at 1920x1080, a gain of 7 FPS.

Q: What are the minimum and maximum frame rates recorded at 4K on Medium settings?

A: At 3840x2160 on Medium settings, the minimum frame rate is 62 FPS and the maximum is 84 FPS, with an average of 73 FPS.

Q: Does the combo achieve playable frame rates at 4K on Ultra settings?

A: The average frame rate at 3840x2160 on Ultra settings is 56 FPS, which is technically playable but may not be smooth enough for fast-paced action for some users.

Q: How does this combo rank compared to all tested configurations in Overpower?

A: This combo ranks 2005 out of 3713 tested combos, placing it in the 54th percentile.

Settings Recommendations

Based on the measured data, the optimal settings depend on the user's resolution and performance priorities. For 1080p gaming, the High preset at 89 FPS offers an excellent balance of visual quality and smoothness. The jump to Ultra provides diminishing returns, costing 15 FPS for what is likely a marginal visual improvement. The Medium preset at 96 FPS is also a viable option for those seeking higher refresh rates, but the visual downgrade from High is noticeable.

At 1440p, the High preset at 79 FPS is the recommended choice. It maintains a frame rate that is above the 60 FPS threshold for smooth gameplay while offering a good level of graphical detail. The Ultra preset at 66 FPS is acceptable but may exhibit occasional stutters in demanding scenes. The Medium preset at 85 FPS is a solid alternative for users who prioritize frame rate over visual fidelity.

For 4K gaming, the Low preset at 116 FPS is surprisingly capable, delivering high frame rates with reduced visual effects. The High preset at 67 FPS is the best choice for a balance of quality and performance, as it stays above the 60 FPS line. The Medium preset at 73 FPS is also a good option, providing a slight performance buffer over High. The Ultra preset at 56 FPS is not recommended for competitive play, but it is playable for slower-paced content if the user prioritizes maximum visual quality over frame rate consistency.

The data suggests that the High preset is the sweet spot for this combo across all resolutions, providing a consistent experience that leverages the hardware's capabilities without pushing the GPU into territory where frame rates become unstable. For users with high refresh rate monitors at 1080p, the Medium preset offers a better path to triple-digit frame rates while still retaining a reasonable level of detail.