Overpower

Overpower, an Action title released on August 14, 2023, presents a specific performance challenge for the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4060 combination. The measured data for this pairing shows a configuration that sits in the middle of the pack, with a combo rank of 2005 out of 3713 tested combinations. This places the system in the 54th percentile of all tested combos, indicating that while it is not a top-tier performer, it is also far from the bottom, offering a balanced experience that aligns with its component choices rather than exceeding them. The data suggests a pairing where neither component is a clear bottleneck, but rather a synergy that produces predictable, mid-range results across the board.

How This Combo Ranks

The combo’s overall rank of 2005 out of 3713 tested combinations in Overpower places it in the 54th percentile of all tested combos. This means that roughly 54% of tested systems perform worse than this configuration, while 46% perform better. The ranking reflects a balanced pairing of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4060, where the system’s performance is neither exceptional nor deficient. Benchmark results indicate that this combo is positioned firmly in the mid-range tier of the database, which is consistent with the individual component positions: the CPU sits in the 78th percentile among all CPUs, while the GPU sits in the 61st percentile among all GPUs. The discrepancy between the CPU’s higher percentile and the GPU’s lower percentile suggests that the graphics card is the more limiting factor in overall system performance for this title. The data shows that the combo does not punch above its weight class, but it also does not underperform; it delivers a consistent, expected level of capability that is typical for a mid-range desktop setup from this era.

GPU Role

The NVIDIA GeForce RTX 4060 is the primary driver of frame output in Overpower, and its specifications directly inform the measured results. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, yielding a bandwidth of 272.0 GB/s. This memory configuration is modest by modern standards, but the data shows it is sufficient for the game’s demands at the tested settings. The GPU’s base clock is 1830 MHz, with a boost clock of 2460 MHz, and memory running at 2125 MHz (17 Gbps effective). These clock speeds are relatively high, allowing the 3072 shading units to process frames efficiently. In practice, the GPU’s role is evident in the frame rates: at 1080p Ultra, the combo achieves 74 FPS, while at 1080p Low, it reaches 153 FPS. The GPU’s performance ceiling is tested at higher resolutions, where the 8 GB VRAM and 128-bit bus become more prominent factors. The data indicates that the RTX 4060 is well-suited for 1080p and 1440p gaming in this title, but its limitations become apparent when pushing towards 4K, especially with higher graphics presets. The GPU’s percentile ranking of 61 among all GPUs, with an average benchmark score of 17639, places it in the upper-mid range, just ahead of rivals like the AMD Radeon 780M by 0.3% and the AMD Radeon Pro 560 by 0.5%.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases from 1080p to 4K, which is a classic indicator of GPU-bound scaling. At 1080p Low, the combo achieves 153 FPS, which drops to 137 FPS at 1440p Low and further to 116 FPS at 4K Low. This represents a 24% drop from 1080p to 4K at Low settings. For Medium settings, the drop is from 96 FPS at 1080p to 85 FPS at 1440p, and then to 73 FPS at 4K, a 24% reduction from 1080p to 4K as well. The High preset shows a similar trend: 89 FPS at 1080p, 79 FPS at 1440p, and 67 FPS at 4K, a 25% drop. Ultra settings see the smallest absolute numbers but the same proportional decline: 74 FPS at 1080p, 66 FPS at 1440p, and 56 FPS at 4K, a 24% reduction. The consistency of these percentage drops across all presets indicates that the limiting component is the GPU, as a CPU-bound scenario would typically show a more pronounced drop at lower resolutions where the CPU is tasked with more work per frame. The data shows that the RTX 4060’s fill rate and memory bandwidth are the constraining factors, as resolution scaling directly impacts the pixel throughput required.

FAQ

Q: What is the average FPS at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 79 FPS.

Q: How does the CPU’s single-thread performance compare to its multi-thread performance in this combo?

A: The AMD Ryzen 5 7600 achieves a single-thread score of 999 in 3dmark and 1852 in Cinebench R23, while its multi-thread scores are 6503 in 3dmark (max threads) and 12735 in Cinebench R23. The single-thread performance is strong, but the multi-thread capability is more than double, which helps in games that utilize multiple cores.

Q: Is the RTX 4060’s VRAM sufficient for 4K gaming in Overpower?

A: The data shows that at 4K Ultra, the combo achieves 56 FPS, while at 4K Low it reaches 116 FPS. The 8 GB VRAM is sufficient for the game at these settings, as the frame rates are playable, but the GPU’s bandwidth limits the highest presets.

Q: What is the difference in FPS between Low and Ultra settings at 1080p?

A: The measured average FPS at 1080p Low is 153 FPS, while at 1080p Ultra it is 74 FPS. This represents a 79 FPS difference, or a 51% reduction in frame rate when switching from Low to Ultra.

Q: How does the Ryzen 5 7600’s average benchmark score compare to its nearest rival?

A: The Ryzen 5 7600 has an average benchmark score of 26324, which is 0.2% higher than the AMD Ryzen 9 6900HX (26274) and 0.4% higher than the Intel Core i9-11900KF (26212).

Q: What is the minimum FPS recorded for the Medium preset at 1440p?

A: The data shows a minimum FPS of 73 at 2560x1440 with Medium settings, with an average of 85 FPS and a maximum of 98 FPS.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture (codename Raphael), built on a 5 nm process. It has a base clock of 3.80 GHz and a boost clock of 5.10 GHz, with a 65 W TDP. The CPU’s cache configuration includes 64 KB L1 per core, 1 MB L2 per core, and 32 MB shared L3 cache. In Overpower, the CPU’s role is to feed the GPU with draw calls and game logic, and the data shows it performs this task admirably. The 3dmark scores indicate robust multi-threading: 6499 for 16 threads and 6503 for max threads, while single-thread performance is 999. The Cinebench R23 scores of 12735 (multi-core) and 1852 (single-core) further confirm its capability. The CPU’s percentile ranking of 78 among all CPUs, with an average benchmark score of 26324, places it slightly ahead of rivals like the AMD Ryzen 7 7435HS (by 0.3%) and the AMD Ryzen 5 8540U (by 0.5%). In practice, the CPU does not appear to be a bottleneck in the measured FPS data, as the frame rates scale consistently with GPU load across different resolutions. The 12 threads are more than sufficient for this Action title, and the high boost clock ensures responsive frame pacing even in CPU-intensive scenes.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the user’s priority for frame rate versus visual fidelity. The data shows that the Medium preset offers the best balance of performance and quality across all resolutions. At 1080p Medium, the combo achieves 96 FPS with a minimum of 81 FPS, ensuring smooth gameplay. At 1440p Medium, it delivers 85 FPS with a minimum of 73 FPS, which is still above the 60 FPS threshold for most displays. Even at 4K Medium, the combo reaches 73 FPS with a minimum of 62 FPS, making it playable on high-refresh-rate 4K monitors. The High preset offers a slight visual improvement but at a cost: 89 FPS at 1080p, 79 FPS at 1440p, and 67 FPS at 4K. The Ultra preset pushes the GPU to its limits, yielding 74 FPS at 1080p, 66 FPS at 1440p, and 56 FPS at 4K, which may be acceptable for slower-paced games but risks dips below 60 FPS at higher resolutions. The Low preset provides the highest frame rates (153 FPS at 1080p, 137 FPS at 1440p, 116 FPS at 4K) but sacrifices visual quality. For a consistent 60+ FPS experience with good visuals, the Medium preset is the recommended choice across all tested resolutions.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across three resolutions and four settings presets.

At 1920x1080, the combo delivers its highest frame rates. With Low settings, the average FPS is 153. Medium settings yield an average of 96 FPS, with a minimum of 81 FPS and a maximum of 110 FPS. High settings produce an average of 89 FPS. Ultra settings reduce the average to 74 FPS. This shows a clear progression where each step up in quality costs approximately 15-20% of the frame rate.

At 2560x1440, the performance scales down predictably. Low settings achieve an average of 137 FPS. Medium settings provide 85 FPS on average, with a minimum of 73 FPS and a maximum of 98 FPS. High settings average 79 FPS. Ultra settings average 66 FPS. The data indicates that 1440p is a sweet spot for this combo, as even Ultra settings maintain an average above 60 FPS.

At 3840x2160, the GPU’s limitations become more apparent. Low settings still deliver a respectable 116 FPS on average. Medium settings average 73 FPS, with a minimum of 62 FPS and a maximum of 84 FPS. High settings average 67 FPS. Ultra settings drop to an average of 56 FPS, which is below the 60 FPS threshold that many users consider the minimum for smooth gameplay. The data shows that for 4K gaming, users should stick to Medium or lower settings to maintain playable frame rates. The trend across all resolutions confirms that the RTX 4060 is the primary limiting factor, as the CPU’s performance headroom is not fully utilized at higher resolutions.