Downfall

The AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4060 combination delivers a surprisingly capable experience in Downfall, a 2016 horror title. The measured data shows that this pairing is heavily GPU-limited at higher settings, while the CPU proves more than adequate even at lower presets. The sweet spot for most users is the Medium preset, which offers a strong balance of visual fidelity and frame rate across all tested resolutions, while Ultra settings are only viable for 1080p play.

Settings Recommendations

The data clearly indicates that the Medium preset offers the best overall experience for this combo. At 1080p, Medium produces an average of 185 FPS with a minimum of 157 FPS, which is substantially above the refresh rate of most displays. This frame rate headroom means the game will feel fluid even during intense horror sequences. At 1440p, Medium still delivers a strong 132 FPS average, with a minimum of 112 FPS, keeping gameplay smooth on high-refresh-rate monitors. Even at 4K, Medium manages an 82 FPS average, with a minimum of 70 FPS, which is playable on most modern displays.

High settings are a reasonable alternative for those prioritizing visual quality over raw frame rates. At 1080p, High yields 152 FPS average, which remains excellent. The drop to 1440p brings 108 FPS average, still very smooth. However, at 4K, High falls to 68 FPS average, which is borderline for fast-paced horror gameplay, though acceptable for slower exploration.

Low settings are not recommended for this hardware. The performance gains over Medium are marginal relative to the visual downgrade: 226 FPS versus 185 FPS at 1080p, 162 FPS versus 132 FPS at 1440p, and 101 FPS versus 82 FPS at 4K. The extra frames do not justify the loss of visual fidelity, especially since Medium already exceeds 70 FPS at 4K.

Ultra settings should be avoided except for 1080p. At 1080p, Ultra produces 95 FPS average, which is playable, but the jump from Medium to Ultra costs 90 FPS. At 1440p, Ultra drops to 68 FPS average, and at 4K, it plummets to 42 FPS average, which is not smooth enough for a responsive horror experience. The data shows that Ultra is not well optimized for this title, with a disproportionate performance cost relative to the visual gains.

GPU Role

The NVIDIA GeForce RTX 4060 is the primary performance driver in this combo. Its 8 GB of GDDR6 memory on a 128-bit bus provides 272.0 GB/s of bandwidth, which is sufficient for Downfall's textures and effects at all tested settings. The GPU's boost clock of 2460 MHz and base clock of 1830 MHz, combined with 3072 shading units, deliver the raw compute needed for this title's horror visuals.

The benchmark results indicate that the RTX 4060's performance scales predictably with resolution. At 1080p Low, the GPU achieves 226 FPS, demonstrating that it is not the bottleneck at lower settings. However, as resolution increases to 4K, the GPU's workload expands significantly. The 4K Ultra result of 42 FPS average shows that the RTX 4060's 8 GB frame buffer and 128-bit memory interface become limiting factors at the highest preset.

The GPU's architectural features, including 24 RT cores and 96 tensor cores, are not explicitly leveraged in this title's measured results, but the Ada Lovelace architecture's efficiency is evident in the scaling pattern. The RTX 4060's 15.11 TFLOPS FP32 performance is sufficient for 1080p and 1440p gaming, but the data shows that 4K Ultra exceeds its practical capabilities. The GPU's percentile rank of 61 against all GPUs, with an average benchmark score of 17639, places it as a mid-range solution that excels at 1080p and handles 1440p well, but struggles at 4K with demanding presets.

How This Combo Ranks

This combination of AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4060 ranks 2009 out of 3716 tested combos in Downfall, placing it in the 54th percentile of tested systems. This mid-pack ranking reflects the balanced nature of the pairing: the CPU is a strong performer, but the GPU's limitations at higher resolutions hold the combo back from top-tier status.

The CPU's performance metrics support this interpretation. The Ryzen 7 5700 scores 20655 in Cinebench R23 multicore and 2916 in single-core, with a percentile rank of 78 against all CPUs. Its nearest rivals include the Intel Xeon D-2752TER with a deltaPct of -0.1, the AMD Ryzen 5 7640U with a deltaPct of 0.1, and the AMD Ryzen 5 6600H with a deltaPct of -0.1. These margins are tiny, indicating that the Ryzen 7 5700 is competitive with these alternatives.

The GPU, however, ranks lower at the 61st percentile against all GPUs. Its nearest rivals include the AMD Radeon HD 7790 with a deltaPct of -0.2, the AMD Radeon 780M with a deltaPct of 0.3, and the AMD Radeon Pro 560 with a deltaPct of 0.5. The RTX 4060's average benchmark score of 17639 is very close to these rivals, despite being a much newer product, which suggests that its performance in this title is not exceptional relative to its class.

The combo's mid-pack ranking is therefore explained by the GPU's modest standing. The CPU's strength prevents the combo from falling lower, but the GPU's limitations cap its upside. In a horror game like Downfall, where atmosphere and pacing matter more than raw frame rates, this combo is adequate but not outstanding.

Measured FPS Breakdown

At 1920x1080, the resolution where this combo performs best, the measured FPS values are consistently high. Low settings produce an average of 226 FPS, which is the highest recorded in the dataset. Medium settings yield 185 FPS average, with a minimum of 157 FPS and a maximum of 213 FPS. High settings drop to 152 FPS average, while Ultra settings produce 95 FPS average. The scaling from Low to Ultra shows a 58% reduction in frame rate, indicating that the GPU is increasingly stressed as settings increase.

At 2560x1440, the performance remains strong but shows clear GPU scaling. Low settings produce 162 FPS average, Medium yields 132 FPS average with a minimum of 112 FPS and a maximum of 152 FPS, High drops to 108 FPS average, and Ultra falls to 68 FPS average. The 1440p results show a 58% reduction from Low to Ultra, mirroring the 1080p scaling pattern, but with lower absolute numbers.

At 3840x2160, the GPU's limitations become apparent. Low settings produce 101 FPS average, which is playable. Medium yields 82 FPS average with a minimum of 70 FPS and a maximum of 95 FPS, which is the only 4K preset with recorded minimum and maximum values. High drops to 68 FPS average, and Ultra falls to 42 FPS average. The 4K scaling from Low to Ultra shows a 58% reduction, consistent with the other resolutions, but the absolute values are much lower.

The data reveals a consistent pattern: the RTX 4060 delivers roughly 58% fewer frames at Ultra compared to Low, regardless of resolution. This suggests that the GPU's performance ceiling is reached at Ultra settings, and the frame rate differences between resolutions are driven by the GPU's fill rate and memory bandwidth.

FAQ

Q: What is the best preset for 1440p gaming with this combo?

A: Medium is the best choice for 1440p. It delivers 132 FPS average with a minimum of 112 FPS, which ensures smooth gameplay. High settings are also viable at 108 FPS average, but Ultra drops to 68 FPS average, which is less desirable.

*Q: Can this combo handle 4K gaming in Downfall?*

A: Yes, but only at lower presets. Low settings produce 101 FPS average, and Medium produces 82 FPS average with a minimum of 70 FPS. High settings drop to 68 FPS average, and Ultra is not playable at 42 FPS average.

Q: How does the Ryzen 7 5700 compare to its nearest rivals?

A: The Ryzen 7 5700 has an average benchmark score of 25517, which is within 0.3% of its nearest rivals. It is 0.1% slower than the Intel Xeon D-2752TER and the AMD Ryzen 5 6600H, but 0.1% faster than the AMD Ryzen 5 7640U and 0.3% faster than the AMD Ryzen 7 5825U.

Q: What is the frame rate difference between Low and Ultra at 1080p?

A: Low settings produce 226 FPS average, while Ultra produces 95 FPS average. This is a difference of 131 FPS, representing a 58% reduction in frame rate when moving from Low to Ultra.

Q: Is the RTX 4060's 8 GB VRAM sufficient for this game?

A: Yes, the measured results show that 8 GB of GDDR6 memory is sufficient for all tested settings and resolutions. The 4K Ultra result of 42 FPS average is limited by the GPU's compute and memory bandwidth, not by VRAM capacity.

Q: How does this combo rank against all tested systems?

A: It ranks 2009 out of 3716 combos, placing it roughly in the middle of the pack. This ranking reflects the GPU's mid-range performance, while the CPU's strong showing prevents the combo from ranking lower.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals important insights about the limiting component in this combo. At 1080p Low, the combo achieves 226 FPS, which is a very high frame rate that suggests the CPU is capable of feeding the GPU at this resolution. Moving to 1440p Low, the frame rate drops to 162 FPS, a 28% reduction. At 4K Low, the frame rate is 101 FPS, a 55% reduction from 1080p.

This scaling pattern indicates that the GPU becomes the limiting factor as resolution increases. The CPU, with its 8 cores and 16 threads, is not the bottleneck at any tested configuration. The Ryzen 7 5700's Cinebench R23 multicore score of 20655 and single-core score of 2916 provide ample processing power for Downfall's game logic and physics.

The Medium settings data provides more granular insight. At 1080p Medium, the average is 185 FPS with a minimum of 157 FPS. At 1440p Medium, the average drops to 132 FPS, a 29% reduction. At 4K Medium, the average is 82 FPS, a 56% reduction from 1080p. The consistent reduction percentages across Low and Medium settings confirm that the GPU's workload scales predictably with resolution.

The Ultra settings show the same scaling pattern but at lower absolute values. At 1080p Ultra, the average is 95 FPS. At 1440p Ultra, it drops to 68 FPS, a 28% reduction. At 4K Ultra, it falls to 42 FPS, a 56% reduction from 1080p. The similarity in these percentages across all presets indicates that the RTX 4060's performance is uniformly limited by resolution, not by specific settings.

The data suggests that the RTX 4060's 128-bit memory bus and 272.0 GB/s bandwidth are the primary constraints at higher resolutions. The GPU's 15.11 TFLOPS FP32 performance is sufficient for 1080p, but the increased pixel count at 4K overwhelms the memory subsystem. The 4K Ultra result of 42 FPS average is particularly telling, as it represents a 58% drop from 1080p Ultra, consistent with the other presets.

For users of this combo, the practical implication is that 1080p is the native resolution for high-refresh-rate play, 1440p is viable for 60-144 Hz displays with Medium settings, and 4K requires Low or Medium settings for playable frame rates. The CPU's strength means that users should prioritize GPU settings over CPU-related options, as the Ryzen 7 5700 will not be the limiting factor in this title.