Overpower
This combination delivers exceptional performance with an average of 143 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 90 | 108 | 117 | 187 |
| 1440p QHD | 106 | 128 | 137 | 210 |
| 1080p Full HD | 119 | 143 | 154 | 218 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 7 5700 + AMD Radeon RX 7900 XTX, In-Depth Analysis
The AMD Ryzen 7 5700 and AMD Radeon RX 7900 XTX pairing delivers a remarkably consistent experience in Overpower, with the data showing that the Ultra preset is the only setting tier that stresses the system enough to require compromise. Across all three tested resolutions, the jump from Medium to Ultra costs a significant frame rate, while the leap from Low to Medium is comparatively modest. For players with high-refresh-rate displays, the Medium preset offers the best balance of visual fidelity and performance headroom, as it maintains an average frame rate above 117 FPS even at 4K. The High preset sits close to Medium in performance but does not offer the same minimum frame rate stability, as the data only records min/max values for Medium settings. Given that Ultra drops the average frame rate by roughly 20-25% compared to High, the Medium preset is the recommended starting point for most users, with High serving as a viable alternative for those who prefer slightly better visuals without the heavy cost of Ultra.
Settings Recommendations
The measured FPS data in Overpower paints a clear picture: the Medium preset is the sweet spot for this hardware combination. At 1920x1080, Medium delivers an average of 154 FPS with a minimum of 131 FPS and a maximum of 177 FPS, which is only 11 frames behind High’s 143 FPS average. However, the Medium preset’s recorded frame time variance is tighter, as it is the only settings tier where min and max values are documented, suggesting more consistent frame pacing. Moving up to High at 1080p nets a 143 FPS average, a loss of 11 FPS from Medium, while Ultra drops further to 119 FPS. The Low preset pushes the average to 218 FPS, but this comes at a substantial cost to visual quality. At 2560x1440, the pattern repeats: Medium averages 137 FPS with a minimum of 117 FPS, High averages 128 FPS, and Ultra falls to 106 FPS. The 4K resolution shows the most significant separation, where Medium holds a 117 FPS average (min 99, max 134), High manages 108 FPS, and Ultra dips to 90 FPS. The data indicates that Ultra is only suitable for players who prioritize image quality over frame rate, as it consistently lands below 120 FPS at 1440p and below 100 FPS at 4K. For the majority of gaming scenarios, Medium provides the highest average frame rate that still maintains a minimum above 99 FPS across all resolutions, making it the most reliable choice.
GPU Role
The AMD Radeon RX 7900 XTX is the dominant component in this pairing, and its specifications directly explain the measured performance in Overpower. The GPU features 24 GB of GDDR6 memory on a 384-bit bus, providing a bandwidth of 960.0 GB/s, which is ample for the game’s asset streaming at any resolution. The 6144 shading units, combined with 384 TMUs and 192 ROPs, deliver a texture rate of 959.2 GTexel/s and a pixel rate of 479.6 GPixel/s. These figures support the high frame rates observed, especially at lower resolutions where the CPU can keep up. The GPU’s boost clock of 2498 MHz and game clock of 2365 MHz indicate that the card is running at near-peak efficiency during gameplay. The FP32 compute throughput of 61.39 TFLOPS is substantial, and the 96 ray tracing cores suggest that Overpower’s visual effects, if they use ray tracing, would be handled efficiently. The GPU’s memory clock of 2500 MHz (20 Gbps effective) ensures that the 24 GB frame buffer is never a bottleneck, as the game’s largest frame time variance occurs at 4K Ultra, where the average FPS drops to 90. This is not a memory capacity issue, but rather a raw compute limitation at the highest settings. The 7900 XTX’s passmark G3D score of 31238 and 3DMark Steel Nomad score of 6841 place it in the 64th percentile of all GPUs, which is modest for a flagship card, but the measured FPS data shows it handles Overpower’s workloads without thermal throttling concerns, given the 355 W TDP and dual-slot cooler design.
Resolution Scaling
The frame rate scaling from 1920x1080 to 3840x2160 reveals where the performance bottleneck shifts in this system. At Low settings, the 1080p average of 218 FPS drops to 210 FPS at 1440p and then to 187 FPS at 4K, a total reduction of 14.2% from 1080p to 4K. This relatively mild drop indicates that at Low settings, the CPU is heavily involved, and the GPU has enough headroom to handle the increased pixel count without a major penalty. The Medium settings show a more pronounced scaling: 154 FPS at 1080p, 137 FPS at 1440p (an 11% drop), and 117 FPS at 4K (a 24% drop from 1080p). The High settings follow a similar trajectory, with 143 FPS at 1080p, 128 FPS at 1440p (10.5% drop), and 108 FPS at 4K (24.5% drop). The Ultra settings exhibit the steepest decline: 119 FPS at 1080p, 106 FPS at 1440p (10.9% drop), and 90 FPS at 4K (24.4% drop). The consistent pattern of roughly a 10% penalty from 1080p to 1440p and an additional 14% from 1440p to 4K across Medium, High, and Ultra settings indicates that the GPU becomes the primary limiting factor at higher resolutions. The fact that the 4K to 1080p ratio is nearly identical across all settings tiers (around 75-77%) suggests that the 7900 XTX’s compute resources scale linearly with resolution, and the CPU’s 16 threads are sufficient to feed the GPU at lower resolutions. The Low settings being the exception, with only a 14% total drop, confirms that the CPU is the limiting component at 1080p Low, as the GPU is not fully utilized.
Measured FPS Breakdown
At 1920x1080, the data shows a clear progression across settings. Low settings produce an average of 218 FPS, which is the highest recorded frame rate in the entire test suite. Medium settings average 154 FPS, with a minimum of 131 FPS and a maximum of 177 FPS, indicating a stable frame time distribution. High settings average 143 FPS, which is 11 FPS lower than Medium. Ultra settings average 119 FPS, a 24 FPS drop from High. This 1080p data suggests that the CPU is capable of driving high frame rates, as even the Ultra preset stays above 115 FPS. Moving to 2560x1440, the Low preset averages 210 FPS, while Medium averages 137 FPS with a minimum of 117 FPS and a maximum of 158 FPS. High settings average 128 FPS, and Ultra drops to 106 FPS. The 1440p results show a more significant gap between Medium and Ultra (31 FPS), indicating that the GPU is starting to feel the load of higher pixel counts. At 3840x2160, the Low preset averages 187 FPS, Medium averages 117 FPS with a minimum of 99 FPS and a maximum of 134 FPS, High averages 108 FPS, and Ultra manages 90 FPS. The 4K Ultra result is the only configuration that falls below 100 FPS, and the 4K Medium minimum of 99 FPS is the lowest recorded frame rate in the entire dataset. The min/max data for Medium settings across all resolutions shows a consistent frame time spread of roughly 30% of the average, which is typical for a fast-paced action game. The 1080p Ultra average of 119 FPS is higher than the 1440p Medium average of 137 FPS, illustrating the resolution trade-off.
How This Combo Ranks
In the Overpower benchmark database, this combination of the AMD Ryzen 7 5700 and AMD Radeon RX 7900 XTX ranks 546th out of 3713 tested combos, placing it in the top 14.7% of all configurations. This ranking is notable because the GPU alone sits in the 64th percentile of all GPUs, and the CPU in the 78th percentile of all CPUs, yet their combined rank in this specific game is higher than either component’s individual percentile would suggest. This indicates that Overpower is well-optimized for this hardware pairing, and the two components complement each other effectively. The CPU’s average benchmark score of 25517 puts it nearly identical to its nearest rival, the Intel Xeon D-2752TER (25530, delta -0.1%), and slightly ahead of the AMD Ryzen 5 7640U (25485, delta 0.1%). The GPU’s average benchmark score of 19410 is closely matched with the NVIDIA GeForce GTX 1060 3 GB (19334, delta 0.4%), though this comparison is misleading given the architectural differences. The combo’s rank of 546 suggests that most higher-ranked configurations likely use newer or more expensive processors, as the 7900 XTX is an end-of-life product, but the 5700’s 8 cores and 16 threads provide adequate parallelism for the game’s workloads. The data shows that this combo outperforms its component-level percentiles, meaning the game scales well with the 7900 XTX’s 24 GB frame buffer and the 5700’s Zen 3 architecture.
CPU Role
The AMD Ryzen 7 5700 plays a supporting role in this pairing, and its specifications reveal why it does not bottleneck the GPU in most scenarios. With 8 cores and 16 threads based on the Zen 3 architecture (Cezanne codename), the CPU has a base clock of 3.70 GHz and a boost clock of 4.60 GHz. The 16 MB of L3 cache and 512 KB of L2 cache per core provide sufficient on-die storage for game data, while the dual-channel DDR4 memory bus offers a bandwidth of 51.2 GB/s. The CPU’s 3DMark scores show a strong scaling from 2 threads (1762) to 8 threads (5585), but the jump from 8 threads to 16 threads is nearly flat (5585 to 6617 in the max threads test), indicating that Overpower’s engine does not fully utilize all 16 threads. This explains why the 1080p Low setting reaches 218 FPS without the CPU becoming a major constraint. The Cinebench R23 multi-core score of 20655 and single-core score of 2916 suggest that the CPU has adequate single-thread performance for game logic, while the PassMark multi-thread score of 24303 and single-thread score of 3296 reinforce this. The CPU’s 65 W TDP means it draws minimal power, leaving thermal headroom for the GPU. In the measured FPS data, the CPU’s influence is most visible at 1080p Low, where the 218 FPS average is likely limited by the CPU’s ability to process draw calls, but even at 1080p Ultra, the 119 FPS average shows that the CPU can keep up with the GPU’s output. The fact that the 4K Low setting (187 FPS) is only 14% lower than the 1080p Low (218 FPS) confirms that the CPU is the limiting factor at low settings, as the GPU has enough headroom to render the extra pixels without a significant frame rate penalty.
Hardware Specifications
AMD Ryzen 7 5700
AMD Radeon RX 7900 XTX
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700 + AMD Radeon RX 7900 XTX in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 187.0 |
| 3840x2160 | Medium | 117.0 |
| 3840x2160 | High | 108.0 |
| 3840x2160 | Ultra | 90.0 |
| 2560x1440 | Low | 210.0 |
| 2560x1440 | Medium | 137.0 |
| 2560x1440 | High | 128.0 |
| 2560x1440 | Ultra | 106.0 |
| 1920x1080 | Low | 218.0 |
| 1920x1080 | Medium | 154.0 |
| 1920x1080 | High | 143.0 |
| 1920x1080 | Ultra | 119.0 |
Overpower with Ryzen 7 5700 + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RX 7900 XTX + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 7 5700 + RX 7900 XTX
Explore FPS benchmarks for other games using this same hardware combination.