Overpower

The AMD Ryzen 5 7600 paired with the NVIDIA GeForce RTX 5090 D delivers exceptional performance in Overpower, consistently exceeding 100 FPS at 4K Ultra and pushing past 250 FPS at 1080p Low. The data indicates this combination is heavily GPU-bound at lower resolutions, with the CPU’s 6-core/12-thread configuration proving more than sufficient to feed the flagship GPU. At 4K Ultra, the average frame rate of 119 FPS represents a 24% drop from the 144 FPS seen at 4K High, highlighting the raw pixel throughput demands of the game’s highest preset.

Resolution Scaling

The measured FPS data reveals a clear pattern of diminishing returns as resolution increases, with the RTX 5090 D’s immense compute power being the primary driver at 1080p and 1440p. At 1080p Low, the combo achieves 259 FPS average, which drops to 249 FPS at 1440p Low—a modest 4% decline that suggests the CPU is nearing its limit in this configuration. However, at 4K Low, the average falls to 236 FPS, a 5% reduction from 1440p, indicating that the GPU’s massive 32 GB frame buffer and 1.79 TB/s bandwidth are still able to maintain high throughput without becoming the sole bottleneck.

The scaling behavior shifts dramatically when moving to Medium settings, where the gap between resolutions widens. At 1080p Medium, the average is 204 FPS, falling to 182 FPS at 1440p Medium (an 11% drop) and then to 155 FPS at 4K Medium (a 15% drop from 1440p). This progressive decline points to the GPU becoming increasingly saturated as pixel count rises, with the RTX 5090 D’s 104.8 TFLOPS FP32 performance being taxed by the combination of higher resolution and more complex shading. The Ultra preset amplifies this trend: 1080p Ultra averages 157 FPS, 1440p Ultra drops to 140 FPS (11% lower), and 4K Ultra falls to 119 FPS (15% lower than 1440p).

The data shows that the RTX 5090 D is the limiting component at 4K, particularly on Ultra settings, where the 119 FPS average represents a 54% reduction from the 259 FPS seen at 1080p Low. In contrast, the CPU’s influence is most evident at 1080p Low, where the 259 FPS ceiling appears capped by the Ryzen 5 7600’s 6-core/12-thread architecture, as evidenced by the relatively small FPS gains when dropping from Medium (204 FPS) to Low (259 FPS) at that resolution. The benchmark results indicate that for users prioritizing maximum frame rates at 1080p, the processor becomes a bottleneck, while at 4K, the GPU’s rendering capabilities dictate performance.

FAQ

*Q: What is the average FPS at 4K Ultra settings in Overpower?*

A: The measured data shows a 119 FPS average at 3840x2160 Ultra, with no minimum or maximum values recorded for this preset.

Q: How does the Ryzen 5 7600 compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7600 scores 26,324 in average benchmark scores, placing it 0.2% ahead of the AMD Ryzen 9 6900HX (26,274), 0.4% ahead of the Intel Core i9-11900KF (26,212), and 0.5% ahead of the AMD Ryzen 5 8540U (26,187). It trails the AMD Ryzen 7 7435HS by 0.3% (26,402).

Q: What is the GPU’s percentile ranking among all GPUs?

A: The RTX 5090 D sits in the 92nd percentile against all GPUs, with an average benchmark score of 77,712. It outperforms the AMD Radeon RX 6650M XT by 1.1% (76,904) but lags the AMD Radeon RX 6850M XT by 1.6% (78,940).

Q: How much FPS is gained by lowering settings from Ultra to Low at 1440p?

A: At 2560x1440, the average FPS rises from 140 on Ultra to 249 on Low, a 78% increase in frame rate, demonstrating the GPU’s headroom when graphical fidelity is reduced.

Q: Does the CPU’s single-thread performance matter for this game?

A: The Ryzen 5 7600’s single-thread score of 999 in 3DMark and 1,852 in Cinebench R23 suggests strong per-core performance. The measured FPS data shows that at 1080p Low, the 259 FPS average is the highest across all configurations, indicating the CPU’s single-thread capabilities are sufficient to avoid becoming a major constraint.

*Q: What is the combo’s rank among tested configurations in Overpower?*

A: This CPU-GPU combination ranks 30th out of 2,980 tested combos in the game, placing it in the top 1% of all configurations.

GPU Role

The RTX 5090 D’s specifications are central to understanding its performance in Overpower. With 32 GB of GDDR7 memory on a 512-bit bus, the GPU delivers 1.79 TB/s of bandwidth, which is critical for maintaining high frame rates at 4K resolutions where texture and geometry data demands are highest. The GPU’s 170 RT cores and 680 tensor cores provide dedicated hardware for ray tracing and AI-accelerated features, though the measured FPS data does not isolate these effects. The card’s boost clock of 2407 MHz, combined with 21,760 shading units, yields 104.8 TFLOPS of FP32 compute, a figure that aligns with the observed performance scaling across resolutions.

The GPU’s memory configuration is particularly relevant at 4K Ultra, where the 119 FPS average represents a 24% drop from the 4K High result. This decline is consistent with the increased memory pressure from Ultra settings, though the 32 GB capacity ensures no capacity limits are hit. The 176 ROPs and 1,636.8 GTexel/s texture rate suggest the GPU excels at fill-rate-heavy scenes, which is reflected in the relatively small FPS penalties when moving from Medium to High at each resolution (e.g., 155 to 144 FPS at 4K, a 7% drop). The GPU’s 92nd percentile ranking among all GPUs, with an average benchmark score of 77,712, places it in the top tier of available hardware, and its nearest rivals—the RX 6650M XT and RX 6850M XT—are mobile-class parts that cannot match its sustained desktop performance.

The measured FPS data shows the GPU’s dominance is most pronounced at 1080p, where even Ultra settings produce 157 FPS average, and Low settings hit 259 FPS. At 4K Ultra, the 119 FPS figure indicates the GPU is still not fully saturated, as the 4K Low result of 236 FPS demonstrates significant headroom when settings are reduced. This suggests that in Overpower, the RTX 5090 D’s raw compute and memory bandwidth are sufficient to overcome most visual demands, with the primary limitation being the CPU at lower resolutions and the GPU at 4K Ultra.

Measured FPS Breakdown

At 1920x1080, the data shows a clear progression from Low to Ultra settings. Low averages 259 FPS, Medium averages 204 FPS (with a minimum of 174 and maximum of 235), High averages 189 FPS, and Ultra averages 157 FPS. The 102 FPS gap between Low and Ultra represents a 65% performance penalty for maximum visual fidelity, though even the Ultra result is exceptionally high for competitive play. The Medium preset’s recorded range (174-235 FPS) illustrates frame time variability, with the 61 FPS spread indicating that the action sequences in Overpower can cause significant FPS fluctuations.

Moving to 2560x1440, the averages are 249 FPS on Low, 182 FPS on Medium (155-209 range), 169 FPS on High, and 140 FPS on Ultra. The resolution increase from 1080p to 1440p results in FPS drops of 4% for Low (259 to 249), 11% for Medium (204 to 182), 11% for High (189 to 169), and 11% for Ultra (157 to 140). This consistent ~11% penalty across Medium, High, and Ultra indicates that the GPU’s pixel throughput scales linearly with resolution, while the Low preset’s smaller drop suggests the CPU is limiting performance at that setting.

At 3840x2160, the averages fall to 236 FPS on Low, 155 FPS on Medium (132-178 range), 144 FPS on High, and 119 FPS on Ultra. The transition from 1440p to 4K incurs penalties of 5% for Low (249 to 236), 15% for Medium (182 to 155), 15% for High (169 to 144), and 15% for Ultra (140 to 119). The 4K Medium range (132-178 FPS) shows a 46 FPS spread, indicating more pronounced frame time spikes at higher resolutions. The overall pattern reveals that the RTX 5090 D maintains playable frame rates (above 119 FPS) at every resolution and setting combination tested, with the 4K Ultra result being the lowest recorded average.

Settings Recommendations

Based on the measured FPS data, the High preset at 2560x1440 offers the best balance of visual quality and performance for most users. At 169 FPS average, it delivers a 21% improvement over Ultra (140 FPS) while maintaining a substantial 56% advantage over the 1080p Ultra result (157 FPS). The High preset at 1440p also avoids the frame time variability seen in Medium (155-209 FPS range), providing a smoother experience. For users with 4K displays, the High preset at 3840x2160 (144 FPS) is the recommended choice, as it offers a 21% FPS uplift over Ultra (119 FPS) without a visually significant reduction in quality, based on the measured data.

For competitive players prioritizing maximum frame rates, the Low preset at 1080p (259 FPS) is the optimal choice, though the 1440p Low setting (249 FPS) provides nearly identical performance with higher resolution. The Medium preset at 1440p (182 FPS) represents a middle ground, but the recorded 155-209 FPS range suggests potential stuttering during intense scenes. The data indicates that the Ultra preset at any resolution is the least efficient choice, with 4K Ultra (119 FPS) and 1080p Ultra (157 FPS) both showing significant FPS penalties relative to High. Given the GPU’s capabilities, the High preset at 1440p or 4K delivers the best overall experience, balancing frame rate stability with graphical fidelity.

CPU Role

The AMD Ryzen 5 7600’s 6-core/12-thread configuration, based on the Zen 4 architecture, provides 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. With a base clock of 3.80 GHz and boost clock of 5.10 GHz, the CPU delivers strong single-thread performance, as evidenced by its 3DMark single-thread score of 999 and Cinebench R23 single-core score of 1,852. The 78th percentile ranking against all CPUs, with an average benchmark score of 26,324, places it in the upper tier of processors, though its nearest rivals—the Ryzen 9 6900HX and Ryzen 7 7435HS—show that the performance gap to mobile-class parts is minimal (0.2% and 0.3% deltas, respectively).

In Overpower, the CPU’s role becomes evident when examining the FPS scaling at low resolutions. At 1080p Low, the 259 FPS average is the highest recorded across all configurations, but the difference between 1080p Low (259 FPS) and 1440p Low (249 FPS) is only 4%, suggesting the CPU is approaching its limits in feeding the GPU. This is corroborated by the 3DMark 16-thread score of 6,499 and max-thread score of 6,503, which indicate that the CPU’s multi-threaded performance plateaus with its 6-core design. The CPU’s 65W TDP and 83.2 GB/s memory bandwidth (DDR5 dual-channel) are sufficient for the game’s demands, as the measured FPS data shows no significant CPU-related stuttering at any settings.

The Cinebench R23 multicore score of 12,735 demonstrates the CPU’s capability in threaded workloads, but the game’s performance is more dependent on single-thread speed, given the 999 3DMark single-thread score. The 5.10 GHz boost clock is crucial for maintaining high frame rates at 1080p, where the GPU is less of a bottleneck. However, at 4K Ultra (119 FPS), the CPU’s influence diminishes, as the GPU’s rendering workload dominates. The data suggests that the Ryzen 5 7600 is a capable partner for the RTX 5090 D, though users seeking to maximize 1080p performance might benefit from a higher-core-count processor, as the 6-core/12-thread configuration appears to cap frame rates around 259 FPS.