Overpower

The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 5090 D delivers consistently high frame rates in Overpower, with the data showing that the GPU is the primary performance driver across all tested resolutions. The combination ranks in the 127th position out of 3713 tested combos, placing it in the top percentile of systems for this title. The measured results reveal a hardware pairing that handles the game’s demands with substantial headroom, though the scaling patterns indicate where the CPU begins to influence performance.

Resolution Scaling

The frame rate progression from 1080p to 4K demonstrates classic GPU-bound behavior, though the rate of decline is shallower than expected for a GPU of this tier. At 1920x1080 with High settings, the combo averages 177 FPS. Moving to 2560x1440 at the same settings drops that to 169 FPS, a modest 4.5% reduction. The jump to 3840x2160 yields 144 FPS, representing a cumulative 18.6% drop from 1080p. This scaling pattern suggests that the RTX 5090 D has enough compute and memory bandwidth to absorb the pixel count increase without severe penalties.

The Low preset reveals an interesting characteristic: at 1080p Low, the system reaches 218 FPS, while 1440p Low hits 210 FPS, and 4K Low manages 199 FPS. The delta between 1080p and 1440p is only 8 FPS (3.7%), and the gap from 1440p to 4K is 11 FPS (5.2%). These relatively small differences across a 4x pixel increase indicate that the GPU is not the limiting factor at lower settings — the CPU begins to cap performance. At 4K Low, the 199 FPS figure is only 9% below the 1080p Low result, which points to the Ryzen 7 5700’s 8-core/16-thread configuration handling the game’s CPU workload efficiently but not infinitely.

For the Medium preset, the data shows a tighter spread: 182 FPS at 1080p, 175 FPS at 1440p, and 155 FPS at 4K. The 1080p-to-1440p drop of 7 FPS (3.8%) mirrors the Low preset, but the 1440p-to-4K drop widens to 20 FPS (11.4%), signaling that the increased graphical load at Medium begins to engage the GPU more heavily. The Ultra preset exhibits the steepest scaling curve: 157 FPS at 1080p, 140 FPS at 1440p, and 119 FPS at 4K. That represents a 24.2% reduction from 1080p to 4K, the largest relative drop across all presets. This pattern confirms that Ultra settings shift the bottleneck decisively toward the GPU, with the RTX 5090 D’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth keeping the frame rate playable even at maximum detail.

GPU Role

The RTX 5090 D’s specifications align with the measured performance. Its base clock of 2017 MHz and boost clock of 2407 MHz provide the raw compute throughput needed for Overpower’s action sequences. The GPU’s 32 GB memory capacity, paired with a 512-bit bus, delivers 1.79 TB/s of bandwidth — a figure that explains why even the 4K Ultra preset maintains a 119 FPS average. With 104.8 TFLOPS of FP32 performance and 21760 shading units, the card has substantial headroom for this title, which is reflected in the high frame rates across all settings.

The GPU’s percentile rank of 92 among all tested GPUs places it well above average, and its avgBenchmarkScore of 77712 is notably higher than its nearest rivals. The data shows the RTX 5090 D outperforms the AMD Radeon RX 6650M XT (score 76904) by 1.1% and the AMD Radeon RX 6850M XT (score 78940) by -1.6%, meaning it sits slightly below the RX 6850M XT in raw benchmark terms. However, the measured FPS in Overpower suggests that the card’s real-world gaming performance exceeds what the synthetic benchmarks might imply, particularly at 4K where the memory bandwidth becomes critical.

The GPU’s role becomes most apparent in the Ultra preset scaling. At 1080p Ultra, the system achieves 157 FPS, but dropping to 4K Ultra reduces that to 119 FPS. This 38 FPS loss is the largest absolute drop across any preset, and it corresponds to the increased texture and shader complexity that demands more from the GPU’s 176 ROPs and 680 TMUs. The memory clock of 1750 MHz (28 Gbps effective) supports the high bandwidth requirement, and the 575 W TDP is justified by the sustained performance at 4K.

Settings Recommendations

Based on the measured rows, the Medium preset offers the most balanced experience across all resolutions. At 4K Medium, the system delivers 155 FPS with a minimum of 132 FPS and maximum of 178 FPS, providing a stable frame time distribution that suits fast-paced action. The 1440p Medium result of 175 FPS (min 149, max 201) and 1080p Medium at 182 FPS (min 154, max 209) both show consistent performance, with the minimum frame rates staying well above typical display refresh rates.

For users prioritizing maximum visual fidelity, the Ultra preset remains viable, especially at 1440p where it hits 140 FPS. At 4K Ultra, the 119 FPS average is still smooth, but the lack of min/max data for that configuration makes it harder to assess frame time consistency. The High preset provides a middle ground: 177 FPS at 1080p, 169 FPS at 1440p, and 144 FPS at 4K. These numbers suggest that High is the most efficient choice for 4K gaming, as the 25 FPS gap between High and Ultra at 4K is more significant than the 9 FPS gap between Medium and High at the same resolution.

The Low preset, while achieving the highest raw frame rates (218 FPS at 1080p, 210 FPS at 1440p, 199 FPS at 4K), offers diminishing returns for competitive play given that the Medium preset already exceeds 150 FPS at 4K. The measured data indicates that the Medium preset strikes the optimal balance between visual quality and performance, particularly because it is the only preset with complete min/max measurements showing consistent frame delivery.

Measured FPS Breakdown

At 1920x1080, the system produces its highest averages across all presets. Low settings yield 218 FPS, High produces 177 FPS, Medium manages 182 FPS, and Ultra reaches 157 FPS. The Medium preset’s minimum of 154 FPS and maximum of 209 FPS demonstrate tight frame pacing, while the 61 FPS spread between Low and Ultra shows the GPU’s capacity to handle the full range of graphical settings.

The 2560x1440 results follow a similar pattern with slightly reduced numbers. Low achieves 210 FPS, High hits 169 FPS, Medium delivers 175 FPS (min 149, max 201), and Ultra reaches 140 FPS. The 70 FPS difference between Low and Ultra at this resolution is the largest across all tested resolutions, indicating that the GPU’s workload scaling is more pronounced at 1440p than at 1080p.

At 3840x2160, the performance gap narrows between presets. Low produces 199 FPS, High reaches 144 FPS, Medium hits 155 FPS (min 132, max 178), and Ultra drops to 119 FPS. The 80 FPS difference between Low and Ultra at 4K is the smallest relative spread, suggesting that the GPU’s memory bandwidth and compute resources become more evenly taxed as resolution increases. The Medium preset’s min of 132 FPS at 4K is notably higher than the Ultra preset’s average of 119 FPS, reinforcing the recommendation for Medium at 4K.

How This Combo Ranks

The combination holds the 127th rank out of 3713 tested combos for Overpower, placing it in the top 3.4% of all systems tested for this game. This ranking reflects the synergy between the Ryzen 7 5700’s 8 cores and 16 threads and the RTX 5090 D’s massive compute throughput. The CPU’s avgBenchmarkScore of 25517 sits nearly exactly between its nearest rivals, with the Intel Xeon D-2752TER at 25530 (-0.1% delta) and the AMD Ryzen 5 7640U at 25485 (0.1% delta). This places the CPU in the 78th percentile of all processors, indicating it is not a weak link in the system.

The GPU’s ranking is more complex. Its avgBenchmarkScore of 77712 places it in the 92nd percentile of all GPUs, but its nearest rivals show mixed results. The AMD Radeon RX 6650M XT scores 76904 (1.1% delta), while the AMD Radeon RX 6850M XT scores 78940 (-1.6% delta). The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants score 79396 and 79605, respectively, both outperforming the RTX 5090 D by over 2%. Despite this, the combo’s overall rank of 127 out of 3713 suggests that the GPU’s gaming performance in Overpower exceeds what its synthetic benchmark average might indicate, particularly when paired with a capable CPU.

FAQ

*Q: What is the best resolution for this combo in Overpower?*

A: The 2560x1440 Medium preset delivers 175 FPS with a minimum of 149 FPS, offering the best balance of visual quality and performance. For maximum frame rates, 1080p Low achieves 218 FPS.

Q: Does the CPU bottleneck the GPU at any setting?

A: The data shows the CPU influences performance at lower settings and resolutions. At 1080p Low, the system hits 218 FPS, but 4K Low only drops to 199 FPS, suggesting the CPU caps performance at these lighter loads. The 8-core, 16-thread Ryzen 7 5700 with a 4.60 GHz boost clock handles the game’s thread workload effectively.

Q: How does the RTX 5090 D compare to its nearest rivals?

A: The GPU’s avgBenchmarkScore of 77712 is 1.1% higher than the AMD Radeon RX 6650M XT (76904) but 1.6% lower than the AMD Radeon RX 6850M XT (78940). It also trails the NVIDIA Tesla P100 PCIe 16 GB (79605) by 2.4%.

Q: What is the most stable preset based on measured frame times?

A: The Medium preset is the only one with complete min/max data across all resolutions. At 4K, it maintains a minimum of 132 FPS with an average of 155 FPS, showing the tightest frame pacing among measured configurations.

Q: Is the Ultra preset playable at 4K?

A: Yes, the Ultra preset at 3840x2160 averages 119 FPS, which is above the 60 FPS threshold for smooth gameplay. However, the Medium preset at 4K (155 FPS) provides a more comfortable margin.

*Q: How does this combo rank overall in Overpower?*

A: The combination ranks 127th out of 3713 tested combos, placing it in the top 3.4% of systems tested for this title.

CPU Role

The AMD Ryzen 7 5700 provides the computational foundation for this combo. Its 8 cores and 16 threads, based on the Zen 3 architecture with a 7 nm process, deliver a boost clock of 4.60 GHz and a base clock of 3.70 GHz. The CPU’s 16 MB of L3 cache and 51.2 GB/s memory bandwidth support the game’s thread scheduling and asset streaming. Benchmark results show the CPU’s multi-threaded capabilities: Cinebench R23 multicore scores 20655, while single-core hits 2916. PassMark multithread reaches 24303, and the 3DMark 16-thread test scores 6628.

The CPU’s percentile rank of 78 versus all CPUs, with an avgBenchmarkScore of 25517, places it in the upper quartile. Its nearest rivals show minimal performance deltas: the Intel Xeon D-2752TER (-0.1%), AMD Ryzen 5 7640U (0.1%), AMD Ryzen 5 6600H (-0.1%), and AMD Ryzen 7 5825U (0.3%). This tight clustering indicates the Ryzen 7 5700 performs competitively within its class, and the measured FPS data confirms it does not create a substantial bottleneck for the RTX 5090 D in Overpower.

The CPU’s role becomes evident when examining the frame rate deltas between presets. At 1080p, the difference between Low (218 FPS) and Ultra (157 FPS) is 61 FPS, but at 4K, that same spread narrows to 80 FPS (199 FPS Low vs 119 FPS Ultra). The fact that 4K Low (199 FPS) is only 19 FPS lower than 1080p Low (218 FPS) while 4K Ultra (119 FPS) is 38 FPS lower than 1080p Ultra (157 FPS) demonstrates that the CPU can feed the GPU faster than the GPU can render at lower settings, but at higher settings, the GPU’s workload dominates. The Ryzen 7 5700’s 16 threads and 4.60 GHz boost clock provide enough single-thread performance for the game’s main thread, while the multi-thread performance handles background tasks without causing frame drops below the minimums observed in the Medium preset measurements.