Overpower

The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 5090 D delivers a top-tier experience in Overpower, ranking in the 99th percentile of tested configurations. The data shows this combo is heavily GPU-bound at higher settings, but the CPU is sufficient to push frame rates to extreme levels at 1080p. Below is a detailed breakdown of how this hardware behaves in the game.

Settings Recommendations

The measured data clearly indicates that the Ultra preset is the only setting that brings this hardware combination near its limits, and even then, it remains comfortably playable. At 4K Ultra, the combo produces an average of 119 FPS. While this is the lowest average recorded for this pairing, it is still well above the 60 FPS threshold for smooth action gameplay. The High preset at 4K yields 144 FPS, which is a 21% performance uplift over Ultra, making it the optimal choice for players who prioritize a higher refresh rate without sacrificing significant visual fidelity.

The Medium preset presents a curious anomaly in the data. At 4K, it delivers 155 FPS, which is only 11 FPS higher than High, and at 1440p it delivers 182 FPS versus 169 FPS on High. This suggests that the jump from Medium to High incurs a relatively small performance penalty while likely offering a substantial visual improvement. For the best balance of image quality and speed, High is the recommended preset. The Low preset, while delivering the highest frame rates (273 FPS at 1080p), is not necessary for this hardware, as even Ultra maintains a playable frame rate.

For players with high-refresh-rate displays, the Low preset at 1440p (263 FPS) or 1080p (273 FPS) is the only way to approach the limits of a 240Hz or 360Hz monitor. However, this comes at the cost of visual detail. Given that the Ultra preset at 1080p still produces 157 FPS, a figure that exceeds the refresh rate of most standard gaming monitors, the data suggests that most users should cap their settings at High or Ultra and enjoy the graphical fidelity. The sweet spot for this combination is High at 1440p, which provides 169 FPS—a figure that is both visually impressive and fast enough for competitive play.

GPU Role

The NVIDIA GeForce RTX 5090 D is the undisputed performance driver in this pairing. Its specifications are staggering: 32 GB of GDDR7 memory on a 512-bit bus, yielding a bandwidth of 1.79 TB/s. The GPU is built on the Blackwell 2.0 architecture with a boost clock of 2407 MHz. These raw specs translate directly to the high frame rates observed in the data. The GPU's 104.8 TFLOPS of FP32 performance and 1,636.8 GTexel/s texture rate ensure that even the most complex scenes in Overpower are rendered without bottlenecking the CPU.

The 32 GB VRAM capacity is particularly relevant for this game. While the measured FPS data does not indicate VRAM constraints, the sheer capacity means that texture streaming and high-resolution assets at 4K Ultra will never be a limiting factor. The GPU's pixel rate of 423.6 GPixel/s is also crucial for the high resolutions tested. The data shows a clear pattern: as resolution increases from 1080p to 4K, the average FPS drops, confirming that the GPU is the primary workload processor. The RTX 5090 D's performance is so robust that even at 4K Ultra, it maintains an average of 119 FPS, a figure that many lesser GPUs could not achieve at 1080p.

The GPU's benchmark percentile of 92 places it among the top hardware available. Its average benchmark score of 77712 reflects its raw compute power. In the context of Overpower, the GPU is never the bottleneck until the Ultra preset is engaged at 4K. The data suggests that the RTX 5090 D is over-provisioned for this title at lower settings, but it provides the headroom necessary for future-proofing and maximum graphical fidelity.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 7600X and the NVIDIA GeForce RTX 5090 D ranks 24th out of 2980 tested combos in Overpower. This places it in the top 0.8% of all configurations, which is an exceptional result. The ranking is a direct consequence of the GPU's immense power, as the CPU is comparatively modest. The data shows that this combo outperforms the vast majority of systems, with only 23 other combinations achieving higher average frame rates across the tested settings.

The ranking is not surprising given the GPU's performance class. The RTX 5090 D sits at the apex of the GPU hierarchy, with a 92nd percentile ranking among all GPUs. The CPU, while not a flagship, holds a 79th percentile ranking among all CPUs. The combination of a top-tier GPU with a mid-to-high-tier CPU proves to be a highly effective strategy for this game. The 2980 combos in the database include configurations with both more powerful CPUs and less powerful GPUs, and the data indicates that the GPU is the dominant factor in achieving a high rank in Overpower.

While the CPU's nearest rivals (AMD Ryzen 7 5700X, Intel Core i5-12600K) have similar average benchmark scores, the performance delta is negligible (0.2% to 0.4%). This confirms that the choice of CPU within this performance tier has minimal impact on the game's outcome, reinforcing the GPU's role as the primary driver of the combo's 24th-place finish.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four quality presets.

At 1920x1080, the combo delivers its highest raw frame rates. The Low preset achieves an average of 273 FPS. The Medium preset reduces this to 204 FPS, with a minimum of 174 FPS and a maximum of 235 FPS. High settings yield 189 FPS, while Ultra produces 157 FPS. This represents a 42.5% drop from Low to Ultra, showing that the CPU and GPU are both working hard to maintain these high numbers.

At 2560x1440, the frame rates remain exceptionally high. Low settings produce 263 FPS, while Medium averages 182 FPS (with a range of 155 to 209 FPS). High settings deliver 169 FPS, and Ultra drops to 140 FPS. The difference between 1080p and 1440p is relatively small, with a 3.7% decrease in FPS at Low settings and a 10.8% decrease at Ultra. This suggests that the GPU has sufficient headroom to handle the increased pixel count.

At 3840x2160, the GPU's dominance is most apparent. Low settings still achieve a remarkable 248 FPS. Medium settings average 155 FPS, with a minimum of 132 and a maximum of 178 FPS. High settings drop to 144 FPS, and Ultra is the most demanding, averaging 119 FPS. The scaling here is interesting: Low to Ultra represents a 52% performance reduction, which is more pronounced than at lower resolutions. This indicates that the GPU's memory bandwidth and compute units are being fully utilized at 4K, particularly with the Ultra preset's added effects.

The Medium preset is the only one with recorded minimum and maximum FPS values. This data shows that the frame pacing is consistent, with the 1% low (132 FPS at 4K) remaining well above playable thresholds. The lack of min/max data for other presets suggests they are stable enough to not warrant specific tracking.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a clear GPU-bound scenario. At Low settings, the FPS drops from 273 at 1080p to 263 at 1440p and then to 248 at 4K. This represents a 9.2% total reduction from 1080p to 4K. The scaling is nearly linear with the pixel count increase, indicating that the GPU is the limiting factor even at the lowest quality settings.

At Ultra settings, the scaling is more pronounced. The FPS drops from 157 at 1080p to 140 at 1440p and then to 119 at 4K. This is a 24.2% reduction from 1080p to 4K. The larger performance hit at Ultra settings is due to the increased computational load of advanced effects like shadows, lighting, and post-processing, which scale with resolution. The data shows that the GPU's texture rate (1,636.8 GTexel/s) and pixel rate (423.6 GPixel/s) are being increasingly taxed as resolution rises.

The relatively small performance gap between 1080p and 1440p (5.4% at Ultra) suggests that the RTX 5090 D is not fully saturated at 1080p. The CPU, with its 6 cores and 12 threads running at a boost clock of 5.30 GHz, is capable of feeding the GPU at lower resolutions. However, the larger gap between 1440p and 4K (15% at Ultra) indicates that the GPU is finally becoming the sole bottleneck. The data suggests that this combo is best utilized at 1440p or 4K, as the extra pixels are "free" in terms of CPU overhead and only cost GPU performance, which this GPU has in abundance.

CPU Role

The AMD Ryzen 5 7600X plays a supporting role in this combination. With 6 cores and 12 threads based on the Zen 4 architecture, this CPU has a base clock of 4.70 GHz and a boost clock of 5.30 GHz. Its performance in synthetic benchmarks is respectable, with a Cinebench R23 multi-core score of 15236 and a single-core score of 1965. The CPU's 32 MB of shared L3 cache and support for DDR5 memory with 83.2 GB/s of bandwidth ensure that it does not starve the GPU of data.

In Overpower, the CPU's role is to maintain high frame rates at lower resolutions. The data shows that at 1080p Low, the combo achieves 273 FPS, which is likely near the CPU's limit for this game. The CPU's single-thread performance (3dmark single-thread score of 1060) is crucial for this, as it handles the game's main simulation thread. The multi-thread performance (3dmark max-threads score of 6845) is also sufficient to handle background tasks and physics calculations.

The CPU's nearest rival, the Intel Core i5-12600K, has an identical average benchmark score with a delta of 0.2%. This indicates that swapping the CPU for a similar-tier alternative would have no measurable impact on Overpower's performance. The CPU's 79th percentile ranking among all CPUs confirms it is a strong performer, but it is not the reason for this combo's high game rank. The data shows that the CPU is never the primary bottleneck in this pairing; instead, it provides a stable platform for the GPU to operate at its full potential. The 105 W TDP of the CPU is modest compared to the GPU's 575 W TDP, further illustrating that the GPU is the dominant power and performance component in this system.