Barony

The AMD Ryzen 5 7600 paired with the NVIDIA GeForce RTX 5090 D produces an extraordinary performance profile in Barony, placing this combination at rank 1 out of 2935 tested combos. The data reveals a system that is overwhelmingly GPU-bound at higher resolutions but still delivers playable frame rates even in the most demanding scenarios. This analysis breaks down the measured FPS data, component roles, and practical settings advice based strictly on the benchmark results.

Resolution Scaling

The measured FPS data shows a classic resolution scaling curve, but with an unusual twist: the frame rates are so high that the game's engine, rather than the hardware, appears to be the limiting factor at lower resolutions. At 1080p with Low settings, the combo achieves an average of 724 FPS. This is a staggering figure that far exceeds the refresh rate of virtually any consumer monitor, indicating that the CPU and GPU are both underutilized at this point, with the game's rendering thread likely becoming the bottleneck.

Moving to 1440p, the Low preset still delivers an average of 457 FPS, a 37% drop from the 1080p figure. This reduction is substantial but keeps the experience firmly in "extremely smooth" territory. The High preset at 1440p yields 292 FPS, while Ultra drops to 209 FPS. At 4K, the scaling becomes more aggressive: Low produces 239 FPS, High drops to 152 FPS, and Ultra falls to 109 FPS. The transition from 1440p High to 4K High represents a 48% performance loss, which is a larger relative drop than the pixel count increase would suggest, pointing to the GPU's memory bandwidth and compute resources becoming the primary constraint.

The most telling data point for identifying the limiting component is the gap between Low and Ultra settings at each resolution. At 1080p, the spread between Low (724 FPS) and Ultra (331 FPS) is 393 FPS. At 1440p, that spread narrows to 248 FPS (457 vs 209). At 4K, it narrows further to 130 FPS (239 vs 109). This shrinking delta indicates that as resolution increases, the GPU's raw throughput becomes the dominant factor, and the CPU's ability to feed frames becomes less relevant. The fact that 4K Ultra still averages 109 FPS—above the 100 FPS threshold—shows that this combo is not severely bottlenecked even in the heaviest configuration tested.

The min FPS data, available only for Medium settings, reinforces this. At 1080p Medium, the minimum is 458 FPS, with a max of 619. At 1440p Medium, the minimum is 289 FPS, and at 4K Medium, it is 151 FPS. These minimums are consistently high, suggesting no sudden stutters or frame-time spikes, which is typical of a well-balanced system where neither component is starved for data. The scaling pattern makes it clear that for users targeting 240Hz displays, 1440p High is the realistic ceiling, while 4K Ultra is best reserved for 120Hz panels.

GPU Role

The NVIDIA GeForce RTX 5090 D is the clear driver of performance in Barony, particularly at higher resolutions. Its 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is more than sufficient for the game's texture streaming and particle effects. The benchmark results show that this memory configuration prevents any VRAM capacity or bandwidth bottlenecks, even at 4K Ultra where the game's largest textures and most complex scenes are rendered.

The GPU's clock behavior is also notable. With a base clock of 2017 MHz and a boost clock of 2407 MHz, the RTX 5090 D maintains high sustained frequencies under load. The FP32 compute rating of 104.8 TFLOPS is the theoretical peak, and the measured results suggest that Barony is able to utilize a significant portion of this throughput. The pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s directly correlate with the FPS figures: at 4K (3840x2160), the 109 FPS Ultra result implies the GPU is processing roughly 904 million pixels per second, which is well within its rated capabilities.

The GPU's benchmark scores further contextualize its performance. Its Passmark G3D score of 44065 places it in the 92nd percentile of all GPUs, and its average benchmark score is 77712. The nearest rivals—the AMD Radeon RX 6850M XT (78940, -1.6% delta) and the NVIDIA Tesla P100 PCIe 16 GB (79605, -2.4% delta)—are all mobile or datacenter parts that score slightly higher in synthetic tests. However, in Barony, the RTX 5090 D's desktop-class power delivery and cooling headroom (with a 575 W TDP) allow it to sustain boost clocks more effectively, resulting in the rank 1 position. The 3DMark Steel Nomad DX12 score of 14326 confirms strong DirectX 12 performance, which is the primary API for this game.

The GPU's memory clock of 1750 MHz (28 Gbps effective) is a key differentiator. This fast GDDR7 memory, combined with the 512-bit bus, gives the RTX 5090 D an advantage in memory-intensive scenarios. In Barony, where procedural generation can create dense environments with many dynamic objects, this bandwidth ensures that texture fetches and geometry data never stall the rendering pipeline. The data suggests that the GPU is the primary scaling factor from 1440p to 4K, as the FPS drops proportionally with the increase in pixel count.

CPU Role

The AMD Ryzen 5 7600 serves as a capable partner to the RTX 5090 D, though its role is secondary in this pairing. With 6 cores and 12 threads based on Zen 4 architecture, this CPU provides ample single-thread performance for Barony's game logic and physics calculations. The boost clock of 5.10 GHz is critical for maintaining high minimum FPS, as roguelike games often have complex AI pathfinding and procedural generation that run on a single thread.

The CPU's benchmark results show it is a strong mid-range processor. Its Cinebench R23 single-core score of 1852 and multi-core score of 12735 indicate good per-thread performance, which is more important than raw core count for this game. The Geekbench single-core score of 2521 and multi-core score of 13413 further support this. The Passmark single-thread score of 3910 and multithread score of 27058 place the CPU in the 78th percentile of all CPUs, with an average benchmark score of 26324. Its nearest rivals are all mobile or older desktop chips: the AMD Ryzen 9 6900HX (26274, +0.2% delta), the Intel Core i9-11900KF (26212, +0.4% delta), and the AMD Ryzen 7 7435HS (26402, -0.3% delta). The Ryzen 5 7600 essentially matches these parts in synthetic scores, but its desktop power envelope (65 W TDP) allows for more consistent sustained boosts.

In the measured FPS data, the CPU's influence is most visible at 1080p where the GPU is not the bottleneck. The jump from 331 FPS at 1080p Ultra to 724 FPS at 1080p Low—a 119% increase—suggests that the CPU can feed frames faster than the GPU can render them at lower settings, but the game engine limits the maximum frame rate. The 3DMark 16-thread score of 6499 and single-thread score of 999 indicate that the CPU's thread scheduling is efficient, which helps maintain stable frame pacing. The L3 cache of 32 MB shared is also beneficial, as it reduces memory latency when the game's procedural content generation accesses data repeatedly.

The CPU's memory support for DDR5 with dual-channel configuration and 83.2 GB/s bandwidth is another factor. While Barony is not typically memory-bandwidth sensitive, the fast DDR5 support ensures that the CPU can quickly feed the GPU with draw calls and transform data, preventing any stalls that would show up as min FPS drops. The measured min FPS values at Medium settings (458 at 1080p, 289 at 1440p, 151 at 4K) are consistently high, indicating the CPU is never the bottleneck in these scenarios.

FAQ

Q: Is the AMD Ryzen 5 7600 enough to keep up with the RTX 5090 D in Barony?

A: Yes. The measured data shows no CPU bottleneck, as the combo achieves rank 1 out of 2935. The CPU's single-core performance (Cinebench R23 single-core score of 1852) is sufficient to feed the GPU at all tested resolutions and settings.

Q: What is the best resolution for this combo to maintain 240 FPS?

A: At 1440p with High settings, the average FPS is 292. This is the highest resolution and setting combination that exceeds 240 FPS. At 4K High, the average drops to 152 FPS, which is below that threshold.

Q: How does the RTX 5090 D compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5090 D has an average benchmark score of 77712. The AMD Radeon RX 6850M XT scores 78940 (1.6% higher), and the AMD Radeon RX 6650M XT scores 76904 (1.1% lower). Despite lower synthetic scores, it ranks higher in Barony due to game-specific optimization.

Q: Does the 32 GB VRAM matter for Barony?

A: The 32 GB of GDDR7 memory with 1.79 TB/s bandwidth ensures no VRAM capacity or bandwidth bottlenecks. The data shows consistent performance even at 4K Ultra, where the average FPS is 109, indicating the memory subsystem is not a limiting factor.

Q: What is the expected FPS at 4K with Ultra settings?

A: The measured average FPS for 4K Ultra is 109. This is the lowest result across all tested configurations, but it remains comfortably playable on a 120Hz display.

Q: Is this combo overkill for Barony?

A: The data indicates yes for 1080p, where Low settings produce 724 FPS. However, for 4K Ultra, the 109 FPS result shows the GPU is being utilized. The rank 1 position out of 2935 combos confirms it is the highest-performing configuration tested, but users targeting 1080p would see no benefit from this hardware.

How This Combo Ranks

This specific combination of AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5090 D achieves the top position in Barony, ranking 1 out of 2935 tested combos. This is a remarkable result, especially considering the CPU is not a flagship part. The CPU's average benchmark score of 26324 places it in the 78th percentile of all CPUs, while the GPU's average score of 77712 places it in the 92nd percentile of all GPUs. The fact that this mid-range CPU paired with a top-tier GPU outperforms all other tested combinations suggests that Barony is heavily GPU-bound at high resolutions, and the CPU's strong single-thread performance is sufficient to avoid holding the GPU back.

The rank 1 position is particularly notable when considering the GPU's nearest rivals in synthetic benchmarks. The RTX 5090 D's average score of 77712 is actually lower than the AMD Radeon RX 6850M XT (78940) and the NVIDIA Tesla P100 PCIe 16 GB (79605). Despite these synthetic deltas of -1.6% and -2.4% respectively, the RTX 5090 D still achieves the highest FPS in Barony, indicating that the game favors the RTX 5090 D's specific architecture—likely its Blackwell 2.0 features, ray tracing cores, or memory bandwidth. The 3DMark Steel Nomad DX12 score of 14326 confirms strong DirectX 12 performance, which is the most relevant metric for this game.

The CPU's rank is less impressive but still solid. Its average benchmark score of 26324 is nearly identical to its nearest rival, the AMD Ryzen 7 7435HS (26402, -0.3% delta). However, in the context of Barony, the CPU's performance is more than adequate. The measured FPS data shows that even at 1080p Low, where the CPU is most likely to be a bottleneck, the average FPS is 724, which is far above any practical refresh rate. This suggests that the game engine, not the CPU, is the limiting factor at lower resolutions, and the Ryzen 5 7600's 5.10 GHz boost clock is sufficient for all gameplay scenarios.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and refresh rate. For users with a 4K 120Hz display, the Medium preset at 3840x2160 is the best choice, as it delivers an average FPS of 178 with a minimum of 151 FPS. This configuration provides a significant safety margin above the 120 FPS target, ensuring smooth gameplay even during intense scenes. The Ultra preset at 4K drops to 109 FPS average, which is borderline for 120Hz displays and may result in occasional dips below the refresh rate.

For 1440p users, the High preset is the sweet spot, offering 292 FPS average. This is well above the 240Hz refresh rate of high-end gaming monitors, and the jump to Ultra only increases the average to 209 FPS, which is still above 200 FPS but requires more GPU resources for marginal visual gains. The Medium preset at 1440p (340 FPS average) and Low (457 FPS average) are only recommended for competitive players who prioritize frame rate over visual fidelity, as High provides a better balance.

At 1080p, the data shows that even Ultra settings produce 331 FPS average, which exceeds the refresh rate of most displays. The High preset (462 FPS) and Medium (538 FPS) are both excellent choices, but the visual difference between Medium and High is often more noticeable in a roguelike where readability of enemy attacks and item details matters. The Low preset (724 FPS) is unnecessary for most users, as the frame rate exceeds any practical display refresh rate, and the visual quality reduction may hinder gameplay.

The min FPS data for Medium settings provides additional context. At 4K Medium, the min FPS is 151, which is 85% of the average. This tight frame-time distribution is ideal for maintaining consistent input response, which is critical in a roguelike where enemy attacks must be dodged precisely. For the best overall experience, the data suggests using High settings at 1440p for competitive play, or Medium settings at 4K for the highest visual quality while maintaining a smooth experience. The Ultra preset is only recommended for users with displays that have a 120Hz refresh rate and who prioritize maximum visual fidelity over frame rate stability.