Overpower
This combination provides smooth gameplay with an average of 70 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 50 | 53 | 89 |
| 1440p QHD | 54 | 62 | 64 | 109 |
| 1080p Full HD | 58 | 71 | 72 | 118 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 5600G + AMD Radeon RX 6600, In-Depth Analysis
The AMD Ryzen 5 5600G and AMD Radeon RX 6600 pairing places 1431st out of 1744 tested combinations in Overpower. That puts this combo in the bottom 18% of all tested hardware pairings, a position that reflects the modest performance ceiling of both components when running a demanding 2023 action title. The data shows a system that can play the game, but does not lead the pack in any measurable way.
How This Combo Ranks
The combo’s rank of 1431 out of 1744 is a clear signal: this is a lower-tier configuration for Overpower. With only 313 tested combos performing worse, this pairing sits firmly in the bottom fifth of the database. The rank is not a surprise given the individual component percentiles. The CPU sits at the 78th percentile against all processors, meaning it outperforms 78% of CPUs tested, yet the GPU’s 69th percentile against all GPUs shows a similar, but slightly weaker, relative standing. When combined, these mid-pack parts do not synergize into a high-ranking system for this specific game.
The measured FPS data reinforces this ranking. Across all resolutions and settings, the average frame rates hover in a range that is playable but not exceptional. At 1080p Ultra, the combo delivers 58.2 FPS, which is smooth enough for most gamers but well below what a top-tier combination would achieve. The rank of 1431 is consistent with a system that can handle the game’s action sequences at moderate settings, but which will struggle to maintain high refresh rates at maximum quality. The delta between this combo and the top performers is substantial, and the data indicates that users should temper expectations for competitive or high-refresh-rate play.
CPU Role
The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, using the Cezanne codename on a 7 nm process. Its base clock is 3.90 GHz with a boost clock of 4.40 GHz, and it features 16 MB of L3 cache. The CPU’s benchmark scores are modest: a Cinebench R23 multi-core score of 16758 and a single-core score of 2365, with a Geekbench multi-core score of 7693. These numbers place the 5600G in a tight cluster with its nearest rivals, including the Intel Core i7-11600H and the AMD EPYC 7713P, with delta percentages of just 0.2% and -0.2% respectively. This means the 5600G is effectively performance-neutral against these alternatives, offering no significant CPU advantage or disadvantage in Overpower.
In this game, the CPU’s role appears to be secondary to the GPU. The measured FPS scaling across resolutions shows a pattern typical of a GPU-bound scenario. At 1080p Low, the combo hits 118.1 FPS, but dropping to 4K Low yields 88.6 FPS, a 25% reduction. This scaling is far more pronounced when moving from Low to Ultra settings at the same resolution. At 1080p, the Ultra preset drops to 58.2 FPS from the Low preset’s 118.1 FPS, a 51% performance hit that points squarely at the GPU’s fill rate and shading capabilities. The CPU’s 6 cores and 12 threads are sufficient to feed the RX 6600 without becoming a bottleneck at these frame rates. The 3DMark max-thread score of 5455 suggests the CPU has ample headroom, as the game does not appear to be taxing all 12 threads simultaneously.
GPU Role
The AMD Radeon RX 6600 is the dominant component in this pairing, and its specifications dictate the overall performance envelope. Built on the RDNA 2.0 architecture with the Navi 23 chip, the GPU features 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. Its boost clock is 2491 MHz, with a game clock of 2044 MHz. The GPU’s benchmark results include a 3DMark Steel Nomad DX12 score of 1492 and a Passmark G3D score of 15096. Its nearest rivals include the AMD Radeon 890M and the NVIDIA GeForce RTX 3060 Ti, with delta percentages of 0% and 0.5% respectively. This indicates the RX 6600 performs nearly identically to the RTX 3060 Ti in average benchmark scores, making it a competent mid-range card.
The GPU’s 8 GB VRAM is a key factor in Overpower’s performance. At 4K Ultra, the combo manages 42 FPS, a figure that suggests the VRAM capacity is not the primary limiter, but rather the GPU’s raw compute power. The FP32 throughput of 8.928 TFLOPS and the 64 ROPs are the likely constraints at higher resolutions and settings. The texture rate of 279.0 GTexel/s and pixel rate of 159.4 GPixel/s are adequate for 1080p and 1440p, but at 4K, the GPU struggles to maintain playable frame rates on High and above. The data shows that the RX 6600 is best suited for 1080p gaming, where it delivers 71 FPS on High and 71.6 FPS on Medium, with the Ultra preset still hitting a respectable 58.2 FPS.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of the combo’s capabilities across twelve configurations. At 1080p, the Low preset delivers 118.1 FPS, which is the highest average frame rate recorded for this combo. Moving to Medium drops to 71.6 FPS, a 39% reduction, while High yields 71 FPS and Ultra falls to 58.2 FPS. The gap between Low and Ultra is 51%, indicating that the GPU’s shading units and ROPs are heavily taxed by the higher settings. At 1440p, the pattern repeats but with lower absolute numbers. Low hits 108.8 FPS, Medium delivers 63.5 FPS, High reaches 62.1 FPS, and Ultra drops to 54 FPS. The 1440p Ultra figure is only 4.2 FPS lower than the 1080p Ultra number, suggesting that the CPU is starting to play a more significant role at this resolution, as the GPU is already saturated.
At 4K, the performance degrades further. Low yields 88.6 FPS, which is still playable, but Medium drops to 53.4 FPS, High to 49.7 FPS, and Ultra to 42 FPS. The 4K Ultra result is 16.2 FPS lower than the 1080p Ultra result, a 28% reduction that highlights the GPU’s limitations at higher pixel counts. The data reveals that the combo can handle 4K at Low settings, but any attempt to increase visual quality at that resolution pushes the frame rate below the 60 FPS threshold that many gamers consider the minimum for smooth action. The measured numbers show a system that is comfortable at 1080p Medium to Ultra, playable at 1440p with adjustments, and only suitable for 4K at the lowest settings.
Resolution Scaling
The resolution scaling analysis clarifies where the bottleneck lies. From 1080p Low to 4K Low, the FPS drops from 118.1 to 88.6, a 25% decrease. This is a relatively mild scaling curve, suggesting that at Low settings, the CPU has enough headroom to feed the GPU even at 4K, and the GPU’s memory bandwidth is sufficient to handle the increased pixel load without a catastrophic drop. However, from 1080p Ultra to 4K Ultra, the FPS drops from 58.2 to 42, a 28% decrease. This similar percentage drop across settings indicates that the GPU is the consistent limiting factor, as the relative performance penalty of increasing resolution is uniform regardless of quality preset.
The scaling from 1080p to 1440p is more telling. At Low settings, 1080p yields 118.1 FPS, while 1440p yields 108.8 FPS, a modest 8% drop. At Ultra settings, 1080p yields 58.2 FPS, and 1440p yields 54 FPS, a 7% drop. This small difference between resolutions at the same preset suggests that the GPU is the primary constraint, as doubling the pixel count from 1080p to 1440p does not halve the frame rate. Instead, the GPU’s shading units are already saturated at 1080p Ultra, so the additional pixels at 1440p cause only a marginal increase in workload. The data indicates that this combo is firmly GPU-bound in Overpower, with the CPU’s 6 cores and 12 threads providing ample support without becoming a limiting factor. The 4K results, while lower in absolute terms, follow the same scaling pattern, reinforcing that the RX 6600’s compute capabilities are the determining factor in this game’s performance.
Hardware Specifications
AMD Ryzen 5 5600G
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600G + AMD Radeon RX 6600 in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 88.6 |
| 3840x2160 | Medium | 53.4 |
| 3840x2160 | High | 49.7 |
| 3840x2160 | Ultra | 42.0 |
| 2560x1440 | Low | 108.8 |
| 2560x1440 | Medium | 63.5 |
| 2560x1440 | High | 62.1 |
| 2560x1440 | Ultra | 54.0 |
| 1920x1080 | Low | 118.1 |
| 1920x1080 | Medium | 71.6 |
| 1920x1080 | High | 71.0 |
| 1920x1080 | Ultra | 58.2 |
Overpower with Ryzen 5 5600G + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RX 6600 + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 5600G + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.